Date: Thu, 30 Nov 1995 19:33:03 -0500 (EST) From: "Marc G. Fournier" <scrappy@hub.org> To: Julian Elischer <julian@ref.tfs.com> Cc: julian@freefall.freebsd.org, current@freefall.freebsd.org Subject: Re: changes in -current..TEST please Message-ID: <Pine.BSF.3.91.951130193144.7418A-100000@hub.org> In-Reply-To: <199512010029.QAA13067@ref.tfs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 30 Nov 1995, Julian Elischer wrote: > > > > On Wed, 29 Nov 1995, Julian Elischer wrote: > > > > > > > > If you sup a copy of -current from now on, > > > I'd like to ask you to include the option JREMOD. > > > > > > options JREMOD > > > > > > in your next kernel compile.. > > > I have it running here but it need more beating on.. > > > > > > it should run IDENTICALLY to before > > > if you have DDB, I'd like any reports of strange > > > crashes > > > > > > have a look at what JREMOD does in /sys/i386/i386/conf.c > > > to see tha scope of the change. > > > > > > > > > > Hi Julian... > > > > Just sup'd in the newest /usr/src/sys, and added options JREMOD > > to my config file, re'config'd and tried to recompile and got the following > > error: > > > > loading kernel > > kern_xxx.o: Undefined symbol `_dummy_cleanup' referenced > > *** Error code 1 > > > > Was there anything added to GENERIC that I might need to > > incorporate into my existing config file, other then JREMOD? > > no I have a running kernel here... > I just took my usual config file and added JREMOD > > can you send me your config file? > (have you updated config recently) I'm using the config that was 'sup'd in as most recent...the old one that is installed doesn't config properly There ya go...same 'hub' config file I've been using, with nothing removed or added except for JREMOD... # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # GENERIC,v 1.45.2.3 1995/06/05 21:50:41 jkh Exp # machine "i386" cpu "I386_CPU" ident hub maxusers 10 options JREMOD options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options MSDOSFS #MSDOS Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console config kernel root on wd0 options SYSVSHM options SYSVSEM options SYSVMSG controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller ncr0 controller ahc0 controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller scbus0 device sd0 device st0 device cd0 #Only need one of these, the code dynamically grows # syscons is the default console driver, resembling an SCO console #device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options "PCVT_NSCREENS=7" #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 Marc G. Fournier | POP Mail Telnet Acct DNS Hosting scrappy@hub.org | WWW Services Database Services | Knowledge, soon to be: | | Information and scrappy@ki.net | WWW: http://hub.org | Communications, Inc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.951130193144.7418A-100000>