Date: Sat, 24 Jul 2004 19:47:59 -0400 (EDT) From: "kalin mintchev" <kalin@el.net> To: freebsd-mobile@freebsd.org Subject: Re: ath card problem Message-ID: <49251.151.204.154.241.1090712879.squirrel@el.net> In-Reply-To: <50138.151.204.154.241.1090701435.squirrel@el.net> References: <50138.151.204.154.241.1090701435.squirrel@el.net>
next in thread | previous in thread | raw e-mail | index | archive | help
some additional information from the log kernel: arp: 192.168.1.3 is on ath0 but got reply from 00:0b:5f:32:72:48 on xl0 Jul 24 18:39:50 host kernel: ath0: hardware error; resetting Jul 24 18:39:50 host kernel: ath0: ath_reset: unable to reset hardware; hal status 3 Jul 24 18:39:53 host kernel: arp: 192.168.1.3 is on ath0 but got reply from 00:0b:5f:32:72:48 on xl0 Jul 24 18:40:23 host last message repeated 4 times Jul 24 18:42:23 host last message repeated 17 times output from arp -a returns only: ? (192.168.1.1) at 00:0f:66:8b:60:13 on xl0 [ethernet] and arp -i ath0 -a returns nothing both cards have the same irq 11 at boot. i took 11 out of the pccard.conf but it still comes up as 11 can anybody help please... thanks more: about xl0 from dmesg: xl0: <3Com 3c556B Fast Etherlink XL> port 0x1800-0x18ff mem 0xe8101000-0xe810107f,0xe8101400-0xe810147f irq 11 at device 3.0 on pci0 xl0: chip is in D3 power mode -- setting to D0 xl0: Ethernet address: 00:00:86:43:54:46 miibus0: <MII bus> on xl0 about ath0 from dmesg: ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 on cardbus0 ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turbo rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:80:c8:16:eb:4b > hi all.. > > i'm having trouble getting an ath card to work properly > > ifconfig output: > ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::280:c8ff:fe16:eb4b%ath0 prefixlen 64 scopeid 0x4 > ether 00:80:c8:16:eb:4b > media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) > status: associated > ssid accesspoint 1:accesspoint > channel 6 authmode OPEN powersavemode OFF powersavesleep 100 > wepmode OFF weptxkey 1 > > output of wicontrol: > > C serial number: [ ] > Station name: [ myhost ] > SSID for IBSS creation: [ accesspoint ] > Current netname (SSID): [ accesspoint ] > Desired netname (SSID): [ accesspoint ] > Current BSSID: [ 00:0f:66:8b:60:13 ] > Channel list: [ ffe 0 1510 1515 1 0 0 0 0 2320 23 ] > IBSS channel: [ 6 ] > Current channel: [ 6 ] > Comms quality/signal/noise: [ 0 32 0 ] > Promiscuous mode: [ Off ] > Intersil-Prism2 based card: [ 1 ] > Port type (1=BSS, 3=ad-hoc): [ 1 ] > MAC address: [ 00:80:c8:16:eb:4b ] > TX rate (selection): [ 0 ] > TX rate (actual speed): [ 11 ] > RTS/CTS handshake threshold: [ 2312 ] > Create IBSS: [ Off ] > Access point density: [ 1 ] > Power Mgmt (1=on, 0=off): [ 0 ] > Max sleep time: [ 100 ] > WEP encryption: [ Off ] > TX encryption key: [ 1 ] > Encryption keys: [ ][ ][ ][ ] > > > it dies see the router because it has status: associated and the channel > setting is the one off the accesspoint. > when i turn the nic off and try to ping out i get: > > ping: sendto: Network is down. > > network is not down because if i turn the nic on again i can do the ping. > > the router is common syslink one and the wireless setup is the > basic/default one with no wep yet. > i should say that the card was able to ping th router when the nic card > didn't come up - that happens sometimes on this machine - t20 thinkpad. > freebsd 5.2.1 > > is it an irq thing between the two cards? > > > what else needs to be done in order to get the card working? > > thanks... > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49251.151.204.154.241.1090712879.squirrel>