Date: Tue, 22 Jun 2010 11:16:18 +0200 From: Jaap Boender <jaapb@kerguelen.org> To: Tom Evans <tevans.uk@googlemail.com> Cc: x11@freebsd.org Subject: Re: intel driver Message-ID: <201006221116.18916.jaapb@kerguelen.org> In-Reply-To: <AANLkTimMJInFQ1M1nwlDuN2YMctsUcoMjrMp-H3ml2Xk@mail.gmail.com> References: <201006221054.56129.jaapb@kerguelen.org> <AANLkTimMJInFQ1M1nwlDuN2YMctsUcoMjrMp-H3ml2Xk@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[...] > Log didn't make it through - are you sure that this isn't a success? > The default Xorg behaviour with startx now is simply to display a > black screen, and zap (ctrl+alt+bksp) has also been disabled by > default. > > Try this: > > Xorg -config /path/to/xorg.conf.new -retro > > Does this look a little more like it? No, it gives the same result... Actually, what I normally try is just running startx, which with the VESA driver just gives me the standard twm desktop with three xterms, but with intel there really is just a black screen. And yes, the log doesn't seem to indicate any error (to me, at least), which is what stumped me too :) Jaap P.S. Here is the log file again: --- start --- X.Org X Server 1.7.5 Release Date: 2010-02-16 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 8.1-PRERELEASE amd64 Current Operating System: FreeBSD marion-dufresne.pps.jussieu.fr 8.1- PRERELEASE FreeBSD 8.1-PRERELEASE #1: Thu Jun 17 15:19:26 CEST 2010 root@marion-dufresne.pps.jussieu.fr:/usr/obj/usr/src/sys/MARION-DUFRESNE amd64 Build Date: 17 June 2010 05:57:22AM Current version of pixman: 0.16.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 22 11:07:09 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/misc/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/misc/"). (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/misc/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/misc/"). (**) FontPath set to: /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (**) ModulePath set to "/usr/local/lib/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse0 (WW) Disabling Keyboard0 (II) Loader magic: 0x680da0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0:0:2:0) 8086:0046:1028:040a Intel Corporation Core Processor Integrated Graphics Controller rev 2, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x000070b0/8, BIOS @ 0x????????/65536 (WW) "extmod" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "record" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "dbe" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "glx" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere. (II) "extmod" will be loaded even though the default is to disable it. (II) "dbe" will be loaded even though the default is to disable it. (II) "glx" will be loaded even though the default is to disable it. (II) "record" will be loaded even though the default is to disable it. (II) "dri" will be loaded even though the default is to disable it. (II) "dri2" will be loaded even though the default is to disable it. (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.5, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 00@00:02:0 (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.5, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0: No such file or directory (EE) intel(0): Failed to become DRM master. (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "DRI" "off" (**) intel(0): Option "ModeDebug" "on" (**) intel(0): Option "FallbackDebug" "on" (**) intel(0): Option "ForceEnablePipeA" "on" (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale (--) intel(0): Chipset: "Arrandale" (--) intel(0): Linear framebuffer at 0x80000000 (--) intel(0): IO registers at addr 0x90000000 size 4194304 (II) intel(0): No SDVO device is found in VBT (II) intel(0): Hardware state on X startup: (II) intel(0): DumpRegsBegin (II) intel(0): CPU_VGACNTRL: 0x0020298e (enabled) (II) intel(0): DIGITAL_PORT_HOTPLUG: 0x00000000 (II) intel(0): RR_HW_CTL: 0x00000000 (low 0, high 0) (II) intel(0): FDI_PLL_BIOS_0: 0x082b3019 (II) intel(0): FDI_PLL_BIOS_1: 0x00000000 (II) intel(0): FDI_PLL_BIOS_2: 0x00000000 (II) intel(0): DISPLAY_PORT_PLL_BIO: 0x0807012b (II) intel(0): DISPLAY_PORT_PLL_BIO: 0x00000000 (II) intel(0): DISPLAY_PORT_PLL_BIO: 0x00000000 (II) intel(0): FDI_PLL_FREQ_CTL: 0x00053687 (II) intel(0): PIPEACONF: 0xc0000050 (enabled, active, 6bpc) (II) intel(0): HTOTAL_A: 0x0787059f (1440 active, 1928 total) (II) intel(0): HBLANK_A: 0x0787059f (1440 start, 1928 end) (II) intel(0): HSYNC_A: 0x061305cd (1486 start, 1556 end) (II) intel(0): VTOTAL_A: 0x03a30383 (900 active, 932 total) (II) intel(0): VBLANK_A: 0x03a30383 (900 start, 932 end) (II) intel(0): VSYNC_A: 0x0395038c (909 start, 918 end) (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): PIPEASRC: 0x027f018f (640, 400) (II) intel(0): PIPEA_DATA_M1: 0x7e72ff51 (TU 64, val 0x72ff51 7536465) (II) intel(0): PIPEA_DATA_N1: 0x00800000 (val 0x800000 8388608) (II) intel(0): PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): PIPEA_DATA_N2: 0x00000000 (val 0x0 0) (II) intel(0): PIPEA_LINK_M1: 0x000331c2 (val 0x331c2 209346) (II) intel(0): PIPEA_LINK_N1: 0x00080000 (val 0x80000 524288) (II) intel(0): PIPEA_LINK_M2: 0x00000000 (val 0x0 0) (II) intel(0): PIPEA_LINK_N2: 0x00000000 (val 0x0 0) (II) intel(0): DSPACNTR: 0x18000000 (disabled) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASTRIDE: 0x00000c80 (50) (II) intel(0): DSPASURF: 0x00000000 (II) intel(0): DSPATILEOFF: 0x00000000 (0, 0) (II) intel(0): PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc) (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): DSPBCNTR: 0x00000000 (disabled) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSTRIDE: 0x00000000 (0) (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (0, 0) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): PIPEB_DATA_N1: 0x00000000 (val 0x0 0) (II) intel(0): PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): PIPEB_DATA_N2: 0x00000000 (val 0x0 0) (II) intel(0): PIPEB_LINK_M1: 0x00000000 (val 0x0 0) (II) intel(0): PIPEB_LINK_N1: 0x00000000 (val 0x0 0) (II) intel(0): PIPEB_LINK_M2: 0x00000000 (val 0x0 0) (II) intel(0): PIPEB_LINK_N2: 0x00000000 (val 0x0 0) (II) intel(0): PFA_CTL_1: 0x80800000 (enable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel (null),chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) (II) intel(0): PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) (II) intel(0): PFA_WIN_POS: 0x00000000 (0, 0) (II) intel(0): PFB_WIN_POS: 0x00000000 (0, 0) (II) intel(0): PFA_WIN_SIZE: 0x05a00384 (1440, 900) (II) intel(0): PFB_WIN_SIZE: 0x00000000 (0, 0) (II) intel(0): PCH_DREF_CONTROL: 0x00005002 (cpu source downspread, ssc_source enable, nonspread_source disable, superspread_source disable, ssc4_mode downspread, ssc1 enable, ssc4 disable) (II) intel(0): PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125) (II) intel(0): PCH_DPLL_TMR_CFG: 0x0271186a (II) intel(0): PCH_SSC4_PARMS: 0x00000000 (II) intel(0): PCH_SSC4_AUX_PARMS: 0x00000000 (II) intel(0): PCH_DPLL_A: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1) (II) intel(0): PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1) (II) intel(0): PCH_FPA0: 0x00030d07 (n = 3, m1 = 13, m2 = 7) (II) intel(0): PCH_FPA1: 0x00030d07 (n = 3, m1 = 13, m2 = 7) (II) intel(0): PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7) (II) intel(0): PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7) (II) intel(0): TRANS_HTOTAL_A: 0x031f027f (640 active, 800 total) (II) intel(0): TRANS_HBLANK_A: 0x03170287 (648 start, 792 end) (II) intel(0): TRANS_HSYNC_A: 0x02ef028f (656 start, 752 end) (II) intel(0): TRANS_VTOTAL_A: 0x020c01df (480 active, 525 total) (II) intel(0): TRANS_VBLANK_A: 0x020401e7 (488 start, 517 end) (II) intel(0): TRANS_VSYNC_A: 0x01eb01e9 (490 start, 492 end) (II) intel(0): TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): TRANSA_DATA_N1: 0x00000000 (val 0x0 0) (II) intel(0): TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): TRANSA_DATA_N2: 0x00000000 (val 0x0 0) (II) intel(0): TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0) (II) intel(0): TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0) (II) intel(0): TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0) (II) intel(0): TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0) (II) intel(0): TRANS_HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): TRANS_HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): TRANS_HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): TRANS_VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): TRANS_VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): TRANS_VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): TRANSB_DATA_N1: 0x00000000 (val 0x0 0) (II) intel(0): TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0) (II) intel(0): TRANSB_DATA_N2: 0x00000000 (val 0x0 0) (II) intel(0): TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0) (II) intel(0): TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0) (II) intel(0): TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0) (II) intel(0): TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0) (II) intel(0): TRANSACONF: 0x00000040 (disable, inactive) (II) intel(0): TRANSBCONF: 0x00000000 (disable, inactive) (II) intel(0): FDI_TXA_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable) (II) intel(0): FDI_TXB_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable) (II) intel(0): FDI_RXA_CTL: 0x00020040 (disable, train pattern pattern_1, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk) (II) intel(0): FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk) (II) intel(0): FDI_RXA_MISC: 0x00000080 (FDI Delay 128) (II) intel(0): FDI_RXB_MISC: 0x00000080 (FDI Delay 128) (II) intel(0): FDI_RXA_TUSIZE1: 0x7e000000 (II) intel(0): FDI_RXA_TUSIZE2: 0x7e000000 (II) intel(0): FDI_RXB_TUSIZE1: 0x7e000000 (II) intel(0): FDI_RXB_TUSIZE2: 0x7e000000 (II) intel(0): FDI_PLL_CTL_1: 0x33505248 (II) intel(0): FDI_PLL_CTL_2: 0x00000000 (II) intel(0): FDI_RXA_IIR: 0x00000000 (II) intel(0): FDI_RXA_IMR: 0x000007ff (II) intel(0): FDI_RXB_IIR: 0x00000000 (II) intel(0): FDI_RXB_IMR: 0x000007ff (II) intel(0): PCH_ADPA: 0x00c00018 (disabled, transcoder A, +hsync, +vsync) (II) intel(0): HDMIB: 0x0000089c (II) intel(0): HDMIC: 0x0000001c (II) intel(0): HDMID: 0x00000018 (II) intel(0): PCH_LVDS: 0x40000000 (disabled, pipe B, 18 bit, 1 channel) (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): EDID for output VGA (II) intel(0): EDID for output LVDS (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS (II) intel(0): Modeline "1440x900"x60.0 107.81 1440 1486 1556 1928 900 909 918 932 (55.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1440x900 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (==) Depth 24 pixmap format is 32 bpp (II) intel(0): Kernel reported 491520 total, 0 used (II) intel(0): I830CheckAvailableMemory: 1966080 kB available (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: Bad file descriptor (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0082a000-0x00d6ffff: front buffer (5400 kB) X tiled (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Mode for pipe B: (II) intel(0): Modeline "1440x900"x60.0 107.81 1440 1486 1556 1928 900 909 918 932 (55.9 kHz) (II) intel(0): chosen: dotclock 107755 vco 1508571 ((m 110, m1 18, m2 8), n 5, (p 14, p1 1, p2 14)) (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Mode for pipe A: (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): chosen: dotclock 31500 vco 2520000 ((m 105, m1 17, m2 8), n 2, (p 80, p1 8, p2 10)) --- end ---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201006221116.18916.jaapb>