Date: Wed, 6 Apr 2005 00:20:10 GMT From: DJ Gregor <dgregor@interhack.com> To: freebsd-scsi@FreeBSD.org Subject: Re: kern/75603: 5.3 kernel crash Message-ID: <200504060020.j360KAnU088359@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/75603; it has been noted by GNATS.
From: DJ Gregor <dgregor@interhack.com>
To: freebsd-gnats-submit@FreeBSD.org, oz@nixil.net
Cc:
Subject: Re: kern/75603: 5.3 kernel crash
Date: Tue, 5 Apr 2005 20:18:41 -0400
I've had the same problem with 5.3-RELEASE when I connected a Hitachi
IC35L073UCDY10 (this is Ultra320) to a Qlogic ISP1080 card. Here is
what I get when booting in verbose mode (note: this was copied by hand,
so there might be errors):
...
pass0 at isp0 bus 0 target 0 lun 0
pass0: <IBM IC35L073UCDY10-0 S27F> Fixed Direct Access SCSI-3 device
pass0: Serial Number E6W7735C
Fatal trap 18: integer divide fault while in kernel mode
instruction pointer = 0x8:0xc044b9cf
stack pointer = 0x10:0xe5184644
frame pointer = 0x10:0xe5184654
code segment = base 0x0, limit 0xffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 33 (swi3: cambio)
trap number = 18
panic: integer divide fault
Uptime: 20s
Cannot dump. No dump device define.
Shutting down ACPI
I'm installing FreeBSD to another drive, and I'll see what data I can
gather with a normal kernel. I'll also see if I can try other drives
and another controller, although my time to test is a bit limited at
this point. Please let me know if there is anything I ought to be
looking at or keeping my eye out for.
Thanks,
- djg
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200504060020.j360KAnU088359>