Date: Mon, 29 Dec 2008 09:42:38 +0400 From: "Nadir M. Aliyev" <naliyev@ultel.az> To: <amd64@freebsd.org> Subject: amd64 bug :( Message-ID: <20081229054150.B71E8444DF9@mail.ultel.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0004_01C96999.C9AD2450 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi. I want to talk you about bugs wth ciss (Smart Array p400) I have server HP Proliant DL380 G5 Storage Rack server. With 2x Intel Xeon 2.5 Ghz, 10 GB of RAM, 6 SAS disk [ 5 (RAID5) + 1 (ONLINE SPARE) ] and Smart Array P400 with 256 mb memory. i installed 64 bit version and I have a great problems: i can install FreeBSD amd64 in normal mode But i can not load/install system ACPI or safe mode. Sometimes its fault issues while server working ( when I plug/unplug hotswap drive or usb disk drive ) and then rebooting. This is error code: ---------------------------------------------------------------------------- --------------------- ciss0: <HP Smart Array P400> port0x4000 mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 10 ad device 0.0 on pci6 ciss can't allocate interrupt Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x30 fault code = supervisor read data, page not present instruction pointer: = 0x8:0xffffffff80487e2f stack pointer = 0x10:0xffffffff80af3850 frame pointer = 0x10:0xffffffff8098bd50 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = resume, IOPL = 0 current process = 0 (swaper) trap number = 12 panic: page fault ---------------------------------------------------------------------------- --------------------- This bug issues with Freebsd 64bit 7.1 rc2 too. I tried 32 bit freebsd 7.0 on my new server. 32 bit works perfectly!!! But I don't want use 32 bit. I have 10GB of RAM. more than 4 gb. Please help me how can i fix this problem. Anybody can help? Great Thanks * * * Nadir Aliyev System and Unix Administrator ULTEL LTD. Internet & Information Technologies Department 14 M.Mekhti-zade. Baku, Azerbaijan AZ1023 Work: +994(12) 4967199 Mobile: +994(55) 7012310 www: <http://www.ultel.az> http://www.ultel.az ------=_NextPart_000_0004_01C96999.C9AD2450 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Fri Dec 26 16:35:40 AZT 2008 = nadir@billing.ultel.net:/usr/src/sys/amd64/compile/GENERIC_CUSTOMCISS_261= 22008_NAD Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2500.02-MHz = K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0x1067a Stepping =3D 10 = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> = Features2=3D0x40ce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,P= DCM,DCA,<b19>,<b26>> AMD Features=3D0x20000800<SYSCALL,LM> AMD Features2=3D0x1<LAHF> Cores per package: 4 usable memory =3D 10723770368 (10226 MB) avail memory =3D 10373492736 (9892 MB) ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, = RF5413) acpi0: <HP ProLiant> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 ACPI Error (psargs-0459): [CS03] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0626): Method parse/execution failed = [\\_PR_.CPU0._CST] (Node 0xffffff000126a5c0), AE_NOT_FOUND est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 cpu4: <ACPI CPU> on acpi0 est4: <Enhanced SpeedStep Frequency Control> on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est4 attach returned 6 p4tcc4: <CPU Frequency Thermal Control> on cpu4 cpu5: <ACPI CPU> on acpi0 est5: <Enhanced SpeedStep Frequency Control> on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est5 attach returned 6 p4tcc5: <CPU Frequency Thermal Control> on cpu5 cpu6: <ACPI CPU> on acpi0 est6: <Enhanced SpeedStep Frequency Control> on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est6 attach returned 6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 cpu7: <ACPI CPU> on acpi0 est7: <Enhanced SpeedStep Frequency Control> on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4722472206004722 device_attach: est7 attach returned 6 p4tcc7: <CPU Frequency Thermal Control> on cpu7 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci9: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9 pci10: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10 pci11: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci10 pci14: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci10 pci17: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.3 on pci9 pci18: <PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci6: <ACPI PCI bus> on pcib7 ciss0: <HP Smart Array P400> port 0x4000-0x40ff mem = 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 18 at device 0.0 on pci6 ciss0: [ITHREAD] pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci19: <ACPI PCI bus> on pcib8 pcib9: <PCI-PCI bridge> at device 5.0 on pci0 pci22: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci23: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 7.0 on pci0 pci26: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib12 pcib13: <PCI-PCI bridge> at device 0.0 on pci2 pci3: <PCI bus> on pcib13 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem = 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3 miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-FDX, auto bce0: Ethernet address: 00:21:5a:f3:36:20 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W = (0x01090605); Flags( MFW MSI ) pcib14: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib14 pcib15: <PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib15 bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem = 0xfa000000-0xfbffffff irq 17 at device 0.0 on pci5 miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-FDX, auto bce1: Ethernet address: 00:21:5a:f3:36:1e bce1: [ITHREAD] bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W = (0x01090605); Flags( MFW MSI ) uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port = 0x1000-0x101f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port = 0x1020-0x103f irq 17 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port = 0x1040-0x105f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port = 0x1060-0x107f irq 19 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq = 16 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 63XXESB USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib16 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem = 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci1 pci1: <base peripheral> at device 4.0 (no driver attached) pci1: <base peripheral> at device 4.2 (no driver attached) uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at = device 4.4 on pci1 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on = usb5 uhub5: 2 ports with 2 removable, self powered pci1: <serial bus> at device 4.6 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on = pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: [FILTER] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5 kbd2 at ukbd0 ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5 ums0: 3 buttons. uhub6: <HP Virtual Hub, class 9/0, rev 1.10/0.01, addr 3> on uhub5 uhub6: 7 ports with 7 removable, self powered Timecounters tick every 1.000 msec acd0: DVDR <TEAC DV-W28E-RW/G.B2> at ata0-master UDMA33 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #4 Launched! da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device=20 da0: 135.168MB/s transfers da0: 559928MB (1146733360 512 byte sectors: 255H 63S/T 65535C) Trying to mount root from ufs:/dev/da0s1a bce0: link state changed to UP ------=_NextPart_000_0004_01C96999.C9AD2450--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081229054150.B71E8444DF9>