From owner-freebsd-scsi Wed May 31 16:39:48 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from wondermutt.net (host75-157.student.udel.edu [128.175.75.157]) by hub.freebsd.org (Postfix) with ESMTP id 0086137C022 for ; Wed, 31 May 2000 16:39:42 -0700 (PDT) (envelope-from papalia@udel.edu) Received: from morgaine.udel.edu (morgaine.1.168.192.IN-ADDR.ARPA [192.168.1.2] (may be forged)) by wondermutt.net (8.9.3/8.9.3) with ESMTP id TAA00403 for ; Wed, 31 May 2000 19:39:38 -0400 (EDT) (envelope-from papalia@udel.edu) Message-Id: <4.3.1.2.20000531193727.00ac2af0@mail.udel.edu> X-Sender: papalia@mail.udel.edu X-Mailer: QUALCOMM Windows Eudora Version 4.3.1 Date: Wed, 31 May 2000 19:42:28 -0400 To: freebsd-scsi@freebsd.org From: John Subject: Dying connection? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, I ran into some really odd (to me, that is) problems. Via Samba I was trying to move items from my windows PC to my FreeBSD (4.0-Stable) box. During these transfers I will occasionally get the following error which (as far as I've figured out) requires a complete power-down to correct. Any thoughts? Thanks, John The error is: May 31 18:46:08 merlin /kernel: (da1:ahc0:0:8:0): SCB 0x30 - timed out while idle, SEQADDR == 0xa May 31 18:46:20 merlin /kernel: (da1:ahc0:0:8:0): Queuing a BDR SCB May 31 18:46:20 merlin /kernel: (da1:ahc0:0:8:0): Bus Device Reset Message Sent May 31 18:46:20 merlin /kernel: (da1:ahc0:0:8:0): SCB 0x30 - timed out in Message-out phase, SEQADDR == 0x157 May 31 18:46:20 merlin /kernel: (da1:ahc0:0:8:0): no longer in timeout, status = 34b May 31 18:46:20 merlin /kernel: ahc0: Issued Channel A Bus Reset. 1 SCBs aborted May 31 18:46:22 merlin /kernel: (da1:ahc0:0:8:0): Invalidating pack I've also got the scsi info from dmesg: ahc0: port 0x6000-0x60ff mem 0xf1200000-0xf1200fff irq 11 at device 17.0 on pci0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc0 bus 0 target 4 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 7) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C) da1 at ahc0 bus 0 target 8 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) da1: 8681MB (17780058 512 byte sectors: 255H 63S/T 1106C) Mounting root from ufs:/dev/sd0s1a cd0 at ahc0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message