Date: Wed, 11 Oct 2006 14:19:41 -0700 From: "Kevin Oberman" <oberman@es.net> To: current@freebsd.org Subject: No psm with if_ath on current Message-ID: <20061011211941.350FE4504D@ptavv.es.net>
next in thread | raw e-mail | index | archive | help
--==_Exmh_1160601581_98237P Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I seem to hit lots of weird ones and this one is. If I boot with if_ath loaded, my laptop does not find the mouse. If I load if_ath after boot, everything seems to be fine. I am running on a Lenovo T43 running current of 9/30. No APIC. I compared boot-v output I found some big clues as to what is happening, but I am far from sure if I am seeing a cause or a symptom. First, the diff: 8,17c8,20 < Preloaded elf kernel "/boot/kernel/kernel" at 0xc0846000. < Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0846234. < Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08462e0. < Preloaded elf module "/boot/kernel/sound.ko" at 0xc084638c. < Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc0846438. < Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08464e8. < Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc0846594. < Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc0846640. < Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08466f0. < Calibrating clock(s) ... i8254 clock: 1193180 Hz --- > Preloaded elf kernel "/boot/kernel/kernel" at 0xc088d000. > Preloaded elf module "/boot/kernel/vesa.ko" at 0xc088d234. > Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc088d2e0. > Preloaded elf module "/boot/kernel/sound.ko" at 0xc088d38c. > Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc088d438. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc088d4e8. > Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc088d594. > Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc088d640. > Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc088d6f0. > Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc088d7a0. > Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc088d84c. > Preloaded elf module "/boot/kernel/ath_rate.ko" at 0xc088d8f8. > Calibrating clock(s) ... i8254 clock: 1193175 Hz 47a51 > ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> 49d52 < io: <I/O> 64a68,69 > io: <I/O> > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) 124c129 < ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/2 -> 10 --- > ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 470c475,491 < pci11: <network, ethernet> at device 2.0 (no driver attached) --- > ath0: <Atheros 5212> mem 0xb4000000-0xb400ffff irq 11 at device 2.0 on pci11 > ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xb4000000 > ath0: [MPSAFE] > ath0: bpf attached > ath0: Ethernet address: 00:14:a4:60:f2:e3 > ath0: bpf attached > ath0: bpf attached > ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > ath0: mac 5.9 phy 4.3 radio 3.6 > ath0: Use hw queue 1 for WME_AC_BE traffic > ath0: Use hw queue 0 for WME_AC_BK traffic > ath0: Use hw queue 2 for WME_AC_VI traffic > ath0: Use hw queue 3 for WME_AC_VO traffic > ath0: Use hw queue 8 for CAB traffic > ath0: Use hw queue 9 for beacons 490,491c511,512 < pcm0: sndbuf_setmap 3e68f000, 4000; 0xe3cbb000 -> 3e68f000 < pcm0: sndbuf_setmap 3e68b000, 4000; 0xe3cbf000 -> 3e68b000 --- > pcm0: sndbuf_setmap 3e667000, 4000; 0xe3ce4000 -> 3e667000 > pcm0: sndbuf_setmap 3e65e000, 4000; 0xe3ce8000 -> 3e65e000 527,533c548 < psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 < psm0: current command byte:0047 < psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 < psm0: [GIANT-LOCKED] < psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons < psm0: config:00002000, flags:00000008, packet size:3 < psm0: syncmask:c0, syncbits:00 --- > acpi_ibm0: <IBM ThinkPad ACPI Extras> irq 12 on acpi0 549d563 < acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 The kernel is loading at a different address and so are all modules. I have no idea why of if this indicates anything. acpi_timer is 1/1 without if_ath and 1/2 with it. This is totally meaningless to me and probably irrelevant. I suspect the pcm diff is also irrelevant. The final one is acpi_ibm0. When ath is loaded, it grabs IRQ12 which would normally handle psm0. If ath is not present, it is already tied to psm0 and acpi_ibm lists no IRQ at all. Even without an IRQ, it seems to work fine. Can anyone suggest what might be going on here? I'd be happy to provide other data if you can tell me what would help. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 --==_Exmh_1160601581_98237P Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) Comment: Exmh version 2.5 06/03/2002 iD8DBQFFLV/tkn3rs5h7N1ERAo6mAJ9AJYup9I/pkfQzN9b3JakonfxlpgCfbttT 9JS0b12EZGpN9jUWwsw0TpA= =1WFN -----END PGP SIGNATURE----- --==_Exmh_1160601581_98237P--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061011211941.350FE4504D>