Date: Mon, 17 Aug 1998 17:56:44 -0400 (EDT) From: Mark turpin <mturpin@shadow.spel.com> To: Philippe Regnauld <regnauld@deepo.prosa.dk> Cc: freebsd-smp@FreeBSD.ORG Subject: Re: PR440fx (Toshiba) + SMP ? Message-ID: <Pine.BSF.3.96.980817173541.18086B-100000@shadow.spel.com> In-Reply-To: <19980817220046.44173@deepo.prosa.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same board and it works fine... I kept the BIOS the same as it was when I got it.. v1.00.01.DI? I think that's the number... Does it say 2 processors on the POST screen? On Mon, 17 Aug 1998, Philippe Regnauld wrote: > I've just replaced my GA-586DX with a PR440fx board with 2 P6-166, > CSS audio and Intel 100Mb fxp. > > (the BIOS displays Toshiba at boot). > > - I've upgraded to the latest BIOS > - I've recompiled my kernel with I686 (-current from last night) > > But FreeBSD insists on seeing only one CPU -- I've even tried hardwiring > with NCPU=2, to no avail. I've also tried playing with the BIOS > SMP settings (1.1 or 1.4) -- no luck... > > dmesg + mptable follows > > > Copyright (c) 1992-1998 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 3.0-CURRENT #0: Mon Aug 17 22:15:45 MET DST 1998 > regnauld@tetard.glou.eu.org:/usr/src/sys/compile/TETARD.smp > Timecounter "i8254" frequency 1193182 Hz cost 3588 ns > CPU: Pentium Pro (686-class CPU) > Origin = "GenuineIntel" Id = 0x619 Stepping=9 > Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> > real memory = 67108864 (65536K bytes) > avail memory = 62853120 (61380K bytes) > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000 > io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000 > Probing for devices on PCI bus 0: > chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 > fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 18 on pci0.6. > 0 > fxp0: Ethernet address 00:a0:c9:49:58:d9 > chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 > ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 17 on pci0.9. > 0 > ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs > scbus0 at ahc0 bus 0 > ahc0: target 0 Tagged Queuing Device > sd0 at scbus0 target 0 lun 0 > sd0: <IBM DCAS-34330W S65A> type 0 fixed SCSI 2 > sd0: Direct-Access 4134MB (8467200 512 byte sectors) > sd0: with 8205 cyls, 6 heads, and an average 171 sectors/track > vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 18 on pci0.17.0 > Probing for devices on the ISA bus: > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <12 virtual consoles, flags=0x0> > ed0 at 0x340-0x35f irq 9 on isa > ed0: address 00:20:a9:00:4b:bd, type NE2000 (16 bit) > sio0 at 0x3f8-0x3ff irq 4 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > psm0 not found at 0x60 > lpt0 at 0x378-0x37f irq 7 on isa > lpt0: Interrupt-driven port > lp0: TCP/IP capable interface > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > npx0 on motherboard > npx0: INT 16 interface > css0 at 0x534 irq 5 drq 1 flags 0x100 on isa > snd0: <CS4232 (CS4236)> > mpu0 not found at 0x330 > APIC_IO: routing 8254 via 8259 on pin 0 > > > > =============================================================================== > > MPTable, version 2.0.15 > > ------------------------------------------------------------------------------- > > MP Floating Pointer Structure: > > location: BIOS > physical address: 0x000f7ed0 > signature: '_MP_' > length: 16 bytes > version: 1.4 > checksum: 0x33 > mode: Virtual Wire > > ------------------------------------------------------------------------------- > > MP Config Table Header: > > physical address: 0x000f7ee0 > signature: 'PCMP' > base table length: 216 > version: 1.4 > checksum: 0x62 > OEM ID: 'INTEL ' > Product ID: 'PR440FX ' > OEM table pointer: 0x00000000 > OEM table size: 0 > entry count: 20 > local APIC address: 0xfec08000 > extended table length: 120 > extended table checksum: 15 > > ------------------------------------------------------------------------------- > > MP Config Base Table Entries: > > -- > Processors: APIC ID Version State Family Model Step Flags > 0 0x11 BSP, usable 6 1 9 0xfbff > -- > Bus: Bus ID Type > 0 PCI > 18 ISA > -- > I/O APICs: APIC ID Version State Address > 13 0x11 usable 0xfec00000 > -- > I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# > > ExtINT active-hi edge 18 0 13 0 > INT active-hi edge 18 1 13 1 > INT active-hi edge 18 3 13 3 > INT active-hi edge 18 4 13 4 > INT active-hi edge 18 5 13 5 > INT active-hi edge 18 6 13 6 > INT active-hi edge 18 7 13 7 > INT active-hi edge 18 8 13 8 > INT active-hi edge 18 9 13 9 > INT active-hi edge 18 10 13 10 > INT active-hi edge 18 12 13 12 > INT active-hi edge 18 14 13 14 > INT active-hi edge 18 15 13 15 > INT active-lo level 0 17:A 13 18 > INT active-lo level 0 9:A 13 17 > INT active-lo level 0 6:A 13 18 > -- > Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# > > ------------------------------------------------------------------------------- > > MP Config Extended Table Entries: > > -- > > bus ID: 0 address type: memory address > address base: 0xd4000 > address range: 0x4000 > -- > > bus ID: 0 address type: memory address > address base: 0xd8000 > address range: 0x4000 > -- > > bus ID: 0 address type: memory address > address base: 0xdc000 > address range: 0x4000 > -- > > bus ID: 0 address type: memory address > address base: 0xa0000 > address range: 0x20000 > -- > > bus ID: 0 address type: memory address > address base: 0x4000000 > address range: 0xfc000000 > -- > > bus ID: 0 address type: I/O address > address base: 0x0 > address range: 0x10000 > > ------------------------------------------------------------------------------- > > # SMP kernel config file options: > > > # Required: > options SMP # Symmetric MultiProcessor Kernel > options APIC_IO # Symmetric (APIC) I/O > > # Optional (built-in defaults will work in most cases): > #options NCPU=1 # number of CPUs > #options NBUS=2 # number of busses > #options NAPIC=1 # number of IO APICs > #options NINTR=24 # number of INTs > > =============================================================================== > > > -- > -[ Philippe Regnauld / sysadmin / regnauld@deepo.prosa.dk / +55.4N +11.3E ]- > > The Internet is busy. Please try again later. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980817173541.18086B-100000>