Date: Mon, 21 Sep 2009 16:02:32 +0000 From: Tom Judge <tom@tomjudge.com> To: freebsd-arm@freebsd.org Subject: Adding support for the Intel SS4000-E NAS aka the EM-7210 Message-ID: <4AB7A398.4040905@tomjudge.com>
next in thread | raw e-mail | index | archive | help
Hi, I am trying to add support for the Intel SS4000-E/EM7210 to FreeBSD, I have copied all of the files for the EP80219 as this seems to be what the board is based on, and modified the interrupt assignment code. See the patch agains sys/arm here: http://www.tomjudge.com/tmp/em-7210-patch I am also having trouble with loading the kernel at the default location, (instructions from here: http://wiki.freebsd.org/FreeBSDAvila) as RedBoot reports that there is no memory at the load address. Currently when I try to load this kernel at the phys address using reboot and try to run the kernel I get nothing outputed on the console. I used the phys address from the addresses that the linux kernel is loaded into out of flash. (see output below) Could someone please give me some hints on what I am doing wrong and need to change? The board is currently supported by the Linux kernel (as the em7210.c) so I was hoping that adding support to FreeBSD would not be difficult. More information about the system can be found here: http://em7210.kwaak.net/ Thanks in advance for any help, Tom > $ sudo cu -l cuau0 -s 115200 Password: Connected +No network interfaces found EM-7210 ver.T04 2005-12-12 (For ver.AA) == Executing boot script in 1.000 seconds - enter ^C to abort ^C RedBoot> ^C RedBoot> fis load rammode RedBoot> go +Ethernet eth0: MAC address 00:0e:0c:b6:bf:1a IP: 10.9.9.1/255.255.255.0, Gateway: 10.9.9.1 Default server: 10.9.9.10, DNS server IP: 0.0.0.0 EM-7210 (RAM mode) 2005-12-22 == Executing boot script in 1.000 seconds - enter ^C to abort ^C RedBoot> ^C RedBoot> fis list Name FLASH addr Mem addr Length Entry point RedBoot 0xF0000000 0xF0000000 0x00040000 0x00000000 RedBoot config 0xF1FC0000 0xF1FC0000 0x00001000 0x00000000 FIS directory 0xF1FE0000 0xF1FE0000 0x00020000 0x00000000 rammode 0xF0060000 0x00200000 0x00040000 0x00200000 log 0xF0040000 0xF0040000 0x00020000 0x00000000 naskey 0xF00A0000 0xF00A0000 0x00020000 0x01008000 zImage 0xF00C0000 0x01008000 0x00200000 0x01008000 ramdisk.gz 0xF02C0000 0x01800000 0x00400000 0x01800000 vendor 0xF06C0000 0xF06C0000 0x01880000 0x01800000 wmdata 0xF1F40000 0xF1F40000 0x00080000 0x01800000 RedBoot>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AB7A398.4040905>