Date: Fri, 20 Oct 2006 11:19:22 +0200 From: Danny Braniss <danny@cs.huji.ac.il> To: Scott Long <scottl@samsco.org> Cc: freebsd-scsi@freebsd.org Subject: Re: need raid controler ... Message-ID: <E1GaqXC-000NpT-Q1@cs1.cs.huji.ac.il> In-Reply-To: <45379486.100@samsco.org> References: <E1GaWDQ-0007Ju-B5@cs1.cs.huji.ac.il> <45379486.100@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
i added:
{0x9005, 0x0286, 0x1014, 0x9580, AAC_HWIF_RKT, 0,
"IBM ServeRAID-X"},
and i got:
aac0: <IBM ServeRAID-X> port 0x5000-0x50ff mem 0xc9e00000-0xc9ffffff,0xc7fe0000
-0xc7ffffff irq 17 at device 0.0 on pci4
aac0: Enabling 64-bit address support
aac0: New comm. interface enabled
aac0: Adaptec Raid Controller 2.0.0-1
and so far completed my first round of make buildworld without
problems.
thanks,
danny
> If you add the PCI Ids to /sys/dev/aac/aac_pci.c, it should work.
> You'll need to use the AAC_HWIF_RKT flag at a minimum. I generally
> don't like adding Ids to this driver until I've had a chance to verify
> that they actually work. But if you can verify it, then I'll add it.
>
> Scott
>
>
> Danny Braniss wrote:
> > this box (ibm-x3650) is here for evaluation/test.
> >
> > is there any available?
> >
> > none2@pci4:0:0: class=0x010400 card=0x95801014 chip=0x02869005 rev=0x02
> > hdr=0x00
> > vendor = 'Adaptec Inc'
> > device = 'AAC-RAID (Rocket)'
> > class = mass storage
> > subclass = RAID
> >
> > dmesg|head:
> > FreeBSD 6.2-PRERELEASE #6: Thu Oct 19 11:17:12 IST 2006
> > danny@bsd:/r+d/obj/bsd/r+d/6.2/src/sys/HUJI
> > ACPI APIC Table: <IBM SERVALNT>
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz (2666.78-MHz K8-class CPU)
> > Origin = "GenuineIntel" Id = 0x6f5 Stepping = 5
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CLFL
> > USH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>
> > ,<b18>>
> > AMD Features=0x20100800<SYSCALL,NX,LM>
> > AMD Features2=0x1<LAHF>
> > Cores per package: 2
> > real memory = 5368709120 (5120 MB)
> > avail memory = 4113821696 (3923 MB)
> >
> >
> > _______________________________________________
> > freebsd-scsi@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1GaqXC-000NpT-Q1>