From owner-freebsd-scsi@FreeBSD.ORG Tue May 4 20:29:48 2010 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 23508106564A for ; Tue, 4 May 2010 20:29:48 +0000 (UTC) (envelope-from peo@intersonic.se) Received: from neonpark.inter-sonic.com (neonpark.inter-sonic.com [212.247.8.98]) by mx1.freebsd.org (Postfix) with ESMTP id D8FFB8FC1A for ; Tue, 4 May 2010 20:29:47 +0000 (UTC) X-Virus-Scanned: amavisd-new at BSDLabs AB Received: from mailrouter.bsdlabs.com ([127.0.0.1]) by mailrouter.bsdlabs.com (mailrouter.bsdlabs.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id w6rOeeDH-8Je; Tue, 4 May 2010 22:29:45 +0200 (CEST) Message-ID: <4BE083B8.6070402@intersonic.se> Date: Tue, 04 May 2010 22:29:44 +0200 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Thunderbird 2.0.0.23 (X11/20091212) MIME-Version: 1.0 To: Scott Long References: <201005041800.o44I08d4017511@freefall.freebsd.org> <4BE06F10.5080904@intersonic.se> <32244F4E-DAF3-4CC0-B178-32B30076A0D5@samsco.org> In-Reply-To: <32244F4E-DAF3-4CC0-B178-32B30076A0D5@samsco.org> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Cc: freebsd-scsi@freebsd.org Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 04 May 2010 20:29:48 -0000 Scott Long wrote: > Ah, I see a problem where the ACPI driver is rejecting the bridge > that the 2 extra controllers are on. This machine is likely 7-8 > years old, yes? Disabling ACPI from the freebsd boot menu or from > the BIOS. Also check if there are any BIOS/firmware upgrades > available for the machine. > > Scott A G4 should be around five years I think, the last U320 equipped ProLiant's. Moving the 6400 card to the slot closest to the MB fixed it. There is a great deal of confusion in HP's docs on slot numbering and such and although I did not find such information I suspect the controller should go inte this slot even if it's pictured in slot two in the manual. Thanks Scott. per