Date: Fri, 11 Feb 2000 12:41:18 -0700 From: "Kenneth D. Merry" <ken@kdm.org> To: freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000211124118.A57790@panzer.kdm.org> In-Reply-To: <20000211134533.B14877@pir.net>; from pir@pir.net on Fri, Feb 11, 2000 at 01:45:33PM -0500 References: <200001120657.XAA12127@harmony.village.org> <Pine.BSF.4.20.0002102245040.2280-100000@localhost> <20000211111321.A12769@pir.net> <20000211103708.A57034@panzer.kdm.org> <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <20000207175326.G9141@pir.net> <20000211134533.B14877@pir.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 11, 2000 at 13:45:33 -0500, Peter Radcliffe wrote: > "Kenneth D. Merry" <ken@kdm.org> probably said: > > On Fri, Feb 11, 2000 at 11:13:21 -0500, Peter Radcliffe wrote: > > > I just can't mount any scsi cdrom drives :/ > > > Disks work fine, all the scsi kernel entries in place, the scsi cdrom > > > device is seen but doing anything with /dev/cd0* gives me "device > > > not configured" :/ > > > > Is your CD drive probed? Does it show up in the dmesg? Can you send your > > dmesg output? > > Yes, yes, and yes. > Heres what I sent to mobile origionally about this. [ ... ] > Peter Radcliffe <pir@pir.net> probably said: > > options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device > > controller aic0 at isa? port ? cam irq ? disable > > controller scbus0 > > device da0 #SCSI direct access devices (aka disks) > > device sa0 #SCSI tapes > > device pass0 #CAM passthrough driver > > device cd0 #Only need one of these, the code dynamically grows > > device pt0 at scbus? # SCSI processor type [ ... ] > > <eject card> > > <move to scsi cdrom drive> > > <insert card> > > [...] > > cd0 at aic0 bus 0 target 6 lun 0 > > cd0: <TOSHIBA XM5701TASUN12XCD 0997> Removable CD-ROM SCSI-2 device > > cd0: 5.000MB/s transfers (5.000MHz, offset 8) > > cd0: cd present [1318424 x 512 byte records] That's odd -- your CDROM drive is using 512 byte sectors. Try flipping the dip switch or whatever to change it to 2K sectors. > > pir@disapp# mount_cd9660 /dev/cd0a /mnt > > mount_cd9660: Device not configured > > pir@disapp# cdcontrol -f /dev/cd0a eject > > cdcontrol: no disc in drive /dev/cd0a > > pir@disapp# mount_cd9660 /dev/cd0c /mnt > > mount_cd9660: Device not configured > > pir@disapp# cdcontrol -f /dev/cd0c eject > > cdcontrol: no disc in drive /dev/cd0a Okay, try this: camcontrol tur cd0 -v camcontrol inquiry cd0 -v Maybe we can narrow this down to either a SCSI problem or some other sort of problem. Also, try changing your drive to 2K sectors. Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000211124118.A57790>