Date: Fri, 24 Aug 2001 14:34:06 -0700 From: "steven r. eastlake" <seastlake@gci.net> To: freebsd-questions@FreeBSD.ORG Subject: Fwd: support Message-ID: <5.1.0.14.0.20010824143212.009e8b30@mail.gci.net>
next in thread | raw e-mail | index | archive | help
>Date: Thu, 23 Aug 2001 14:38:12 -0700
>To: freebsd-questions@FreeBSD.ORG
>From: "steven r. eastlake" <seastlake@gci.net>
>Subject: support
>
>
> thank you in advance for any help provided...
> i have a 3com 56k pci modem, not a winmodem, how do i
> make freeBSD 4.0 see this as one of the serial devices...
> com1 presently has a mouse attached, no other physical com ports...
> thanks again...
follow-up to the previously sent email above, here is dmesg for
above system...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Fri Aug 24 13:18:17 AKDT 2001
root@bsd:/usr/src/sys/compile/SREX
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (133.27-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
avail memory = 45686784 (44616K bytes)
Preloaded elf kernel "kernel" at 0xc0319000.
Preloaded elf module "splash_bmp.ko" at 0xc031909c.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc0319140.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x12b9, dev=0x1008) at 13.0 irq 10
pci0: <SiS 6326 SVGA controller> at 14.0
pci0: <unknown card> (vendor=0x4005, dev=0x4000) at 15.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 8063MB <FUJITSU MPD3084AT> [16383/16/63] at ata0-master using WDMA2
ad2: 12971MB <WDC WD136AA-35BAA0> [26354/16/63] at ata1-master using WDMA2
acd0: CD-RW <SONY CD-RW CRX0811> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad2s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20010824143212.009e8b30>