Date: Sat, 22 Jun 2024 22:19:21 -0700 From: Mark Millard <marklmi@yahoo.com> To: "Anantharam, Arjun" <arjun.anantharam@intel.com> Cc: FreeBSD ARM List <freebsd-arm@freebsd.org> Subject: Re: FreeBSD OS installation stuck after selecting Boot installer Message-ID: <2E74CC9A-D653-49A8-8A12-788806554F49@yahoo.com> In-Reply-To: <MW3PR11MB47614BE548FC663F56011C0F80C92@MW3PR11MB4761.namprd11.prod.outlook.com> References: <9BE6FB50-27DC-453E-B915-131D45C901CD.ref@yahoo.com> <9BE6FB50-27DC-453E-B915-131D45C901CD@yahoo.com> <MW3PR11MB4761B4889AFA6C18AB31BFDE80C92@MW3PR11MB4761.namprd11.prod.outlook.com> <CANCZdfrWofc-e=9_-wf=ose64w1y2fyg8Y%2BVWAC58JJV3q7vuQ@mail.gmail.com> <MW3PR11MB4761223785D1EFC855D7148280C92@MW3PR11MB4761.namprd11.prod.outlook.com> <MW3PR11MB47614BE548FC663F56011C0F80C92@MW3PR11MB4761.namprd11.prod.outlook.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jun 21, 2024, at 17:02, Anantharam, Arjun =
<arjun.anantharam@intel.com> wrote:
> P {margin-top:0;margin-bottom:0;} I did try to set these values in =
boot loader prompt:
>=20
> set hw.uart.console=3D"io:0x3F8,br:115200"
> set efi_max_resolution=3D1920x1080
> set hint.uart.0.disabled=3D"1"
> set hint.uart.1.disabled=3D"1"
>=20
> However, i was unable to change "efi_com_port" to say 1(default is 0)
>=20
> With this, i no longer see Garbage data being displayed. But the =
installation does not proceed either, it is sort of stuck:
>=20
> <image.png>
Did you notice the "aa" vs. "a" in:
hint.uart0.disaabled
vs.
hint.uart1.disabled
? (No claim it is an essential issue for your overall problem.)
[This did not seem worth sending to Warner.]
> i.e after boot cmd, i see EFI Framebuffer information all set to =
0x0(In case the above screenshot is not visible)
>=20
> So, i am not sure what sort of UART related setting i need to change =
or set..
>=20
> Thanks,
> Arjun
>=20
>> From: owner-freebsd-arm@FreeBSD.org <owner-freebsd-arm@FreeBSD.org> =
on behalf of Anantharam, Arjun <arjun.anantharam@intel.com>
>> Sent: Friday, June 21, 2024 8:31 AM
>> To: Warner Losh <imp@bsdimp.com>
>> Cc: Mark Millard <marklmi@yahoo.com>; FreeBSD ARM List =
<freebsd-arm@freebsd.org>
>> Subject: Re: FreeBSD OS installation stuck after selecting Boot =
installer Hi Warner,
>>=20
>> Here are the details:
>>=20
>> OK show hw.uart.console
>> variable 'hw.uart.console' not found
>>=20
>> OK show
>> COLUMNS=3D80
>> LINES=3D50
>> acpi.oem=3DINTEL
>> acpi.revision=3D2
>> acpi.rsdp=3D0x00000044b6e30018
>> acpi.rsdt=3D0x0000000000000000
>> acpi.xsdt=3D0x00000044b6e3fe98
>> acpi.xsdt_length=3D36
>> acpi_dsdt_load=3DNO
>> acpi_dsdt_name=3D/boot/acpi_dsdt.aml
>> acpi_dsdt_type=3Dacpi_dsdt
>> acpi_load=3DYES
>> acpi_video_load=3DNO
>> audit_event_load=3DNO
>> audit_event_name=3D/etc/security/audit_event
>> audit_event_type=3Detc_security_audit_event
>> autoboot_delay=3DNO
>> bitmap_load=3DNO
>> bitmap_name=3Dsplash.bmp
>> bitmap_type=3Dsplash_image_data
>> boot_serial=3DYES
>> bootenv_autolist=3DYES
>> bootfile=3Dkernel
>> console=3Defi
>> cpu_microcode_load=3DNO
>> cpu_microcode_name=3D/boot/firmware/ucode.bin
>> cpu_microcode_type=3Dcpu_microcode
>> currdev=3Ddisk0p2:
>> efi-version=3D2.70
>> efi_com_port=3D0
>> efi_com_speed=3D115200
>> efi_max_resolution=3D1x1
>> entropy_cache_load=3DYES
>> entropy_cache_name=3D/boot/entropy
>> entropy_cache_type=3Dboot_entropy_cache
>> entropy_efi_seed=3DYES
>> fdt_enable=3DNO
>> hint.acpi.0.disabled=3D0
>> hint.smbios.0.mem=3D0x44bbfd0000
>> hostuuid_load=3DYES
>> hostuuid_name=3D/etc/hostid
>> hostuuid_type=3Dhostuuid
>> interpret=3DOK
>> kernel=3Dkernel
>> kernel_options=3D
>> kernels_autodetect=3DNO
>> loaddev=3Ddisk0p2:
>> loader.efi=3D1
>> loader_conf_dirs=3D/boot/loader.conf.d
>> loader_menu_multi_user_prompt=3DInstaller
>> local_loader_conf_files=3D/boot/loader.conf.local
>> module_blacklist=3Ddrm drm2 radeonkms i915kms amdgpu
>> module_path=3D/boot/modules;/boot/dtb;/boot/dtb/overlays
>> module_verbose=3D2
>> nextboot_conf=3D/boot/nextboot.conf
>> prompt=3D${interpret}
>> ram_blacklist_load=3DNO
>> ram_blacklist_name=3D/boot/blacklist.txt
>> ram_blacklist_type=3Dram_blacklist
>> screensave_load=3DNO
>> screensave_name=3Dgreen_saver
>> script.lang=3Dlua
>> smbios.bios.reldate=3DApr 4 2024
>> smbios.bios.revision=3D1.2
>> smbios.bios.vendor=3DIntel
>> smbios.bios.version=3DIntel(R) IPU Embedded UEFI FW 1.2.0 for AArch64
>> smbios.chassis.maker=3DIntel
>> smbios.chassis.serial=3DN/A
>> smbios.chassis.tag=3DN/A
>> smbios.chassis.type=3DOther
>> smbios.chassis.version=3DN/A
>> smbios.memory.enabled=3D3145728
>> smbios.socket.enabled=3D16
>> smbios.socket.populated=3D16
>> smbios.system.family=3DIntel(R) IPU E2100
>> smbios.system.maker=3DIntel
>> smbios.system.product=3DIntel(R) IPU Adapter E2100-CCQDA2
>> smbios.system.serial=3D000000
>> smbios.system.sku=3D000000000000
>> smbios.system.uuid=3D30313245-3030-3030-6e0c-56812e49f70f
>> smbios.system.version=3DN/A
>> smbios.version=3D3.3
>> splash_bmp_load=3DNO
>> splash_pcx_load=3DNO
>> splash_txt_load=3DNO
>> twiddle_divisor=3D16
>> verbose_loading=3DNO
>> vesa_load=3DNO
>> vfs.mountroot.timeout=3D10
>> OK
>>=20
>>=20
>> =46rom efi-show, details relevant to ConOut:
>>=20
>> global NV,BS,RS ConIn =3D =
VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,
>> 8,N,1)/VenMsg(7D916D80-5BB1-458C-A48F-E25FDD51EF94)
>> global NV,BS,RS ConOut =3D =
VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200
>> ,8,N,1)/VenMsg(7D916D80-5BB1-458C-A48F-E25FDD51EF94)
>> global NV,BS,RS ErrOut =3D =
VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200
>> ,8,N,1)/VenMsg(7D916D80-5BB1-458C-A48F-E25FDD51EF94)
>>=20
>>=20
>> global BS,RS ConInDev =3D =
VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,
>> =
8,N,1)/VenPcAnsi(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(11520=
0,8,N,
>> =
1)/VenVt100(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N=
,1)/Ve
>> =
nVt100Plus(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,=
1)/Ven
>> =
Utf8(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/Ven=
Msg(7D
>> =
916D80-5BB1-458C-A48F-E25FDD51EF94),/VenHw(D3987D4B-971A-435F-8CAF-4967EB6=
27241)
>> =
/Uart(115200,8,N,1)/VenMsg(E4364A7F-F825-430E-9D3A-9C9BE6817CA5),/VenHw(D3=
987D4B
>> =
-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenMsg(FBFCA56B-BB36-4B78=
-AAAB-
>> =
BE1B97EC7CCB),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N=
,1)/Ve
>> =
nMsg(8E46DDDD-3D49-4A9D-B875-3C086F6AA2BD),/VenHw(D3987D4B-971A-435F-8CAF-=
4967EB
>> =
627241)/Uart(115200,8,N,1)/VenMsg(FC7DD6E0-813C-434D-B4DA-3BD649E9E15A)
>> global BS,RS ConOutDev =3D =
VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200
>> =
,8,N,1)/VenPcAnsi(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(1152=
00,8,N
>> =
,1)/VenVt100(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,=
N,1)/V
>> =
enVt100Plus(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N=
,1)/Ve
>> =
nUtf8(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/Ve=
nMsg(7
>> =
D916D80-5BB1-458C-A48F-E25FDD51EF94),/VenHw(D3987D4B-971A-435F-8CAF-4967EB=
627241
>> =
)/Uart(115200,8,N,1)/VenMsg(E4364A7F-F825-430E-9D3A-9C9BE6817CA5),/VenHw(D=
3987D4
>> =
B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenMsg(FBFCA56B-BB36-4B7=
8-AAAB
>> =
-BE1B97EC7CCB),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,=
N,1)/V
>> =
enMsg(8E46DDDD-3D49-4A9D-B875-3C086F6AA2BD),/VenHw(D3987D4B-971A-435F-8CAF=
-4967E
>> =
B627241)/Uart(115200,8,N,1)/VenMsg(FC7DD6E0-813C-434D-B4DA-3BD649E9E15A)
>> global BS,RS ErrOutDev =3D =
VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200
>> =
,8,N,1)/VenPcAnsi(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(1152=
00,8,N
>> =
,1)/VenVt100(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,=
N,1)/V
>> =
enVt100Plus(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N=
,1)/Ve
>> =
nUtf8(),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/Ve=
nMsg(7
>> =
D916D80-5BB1-458C-A48F-E25FDD51EF94),/VenHw(D3987D4B-971A-435F-8CAF-4967EB=
627241
>> =
)/Uart(115200,8,N,1)/VenMsg(E4364A7F-F825-430E-9D3A-9C9BE6817CA5),/VenHw(D=
3987D4
>> =
B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenMsg(FBFCA56B-BB36-4B7=
8-AAAB
>> =
-BE1B97EC7CCB),/VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,=
N,1)/V
>> =
enMsg(8E46DDDD-3D49-4A9D-B875-3C086F6AA2BD),/VenHw(D3987D4B-971A-435F-8CAF=
-4967E
>> =
B627241)/Uart(115200,8,N,1)/VenMsg(FC7DD6E0-813C-434D-B4DA-3BD649E9E15A)
>>=20
>>=20
>> Please let me know if you need more details..
>>=20
>> Thanks for your help!!
>> Arjun
>> From: Warner Losh <imp@bsdimp.com>
>> Sent: Thursday, June 20, 2024 10:55 PM
>> To: Anantharam, Arjun <arjun.anantharam@intel.com>
>> Cc: Mark Millard <marklmi@yahoo.com>; FreeBSD ARM List =
<freebsd-arm@freebsd.org>
>> Subject: Re: FreeBSD OS installation stuck after selecting Boot =
installer =20
>>=20
>> On Thu, Jun 20, 2024, 11:46=E2=80=AFPM Anantharam, Arjun =
<arjun.anantharam@intel.com> wrote:
>> Thanks Mark for your response =F0=9F=99=82
>> =46rom the FreeBSD Boot loader, after adding the below =
configurations, i no longer see error messages or warning message on =
device tree blob:
>>=20
>> set comconsole_speed=3D115200
>> echo comconsole_speed is set to ${comconsole_speed}
>> set acpi_load=3D"YES"
>> set fdt_enable=3D"NO"
>> echo acpi_load is set to ${acpi_load}
>> echo fdt_enable is set to ${fdt_enable}
>>=20
>> boot
>>=20
>> But still run into FreeBSD installation getting stuck after =
displaying some garbage message:
>>=20
>> =
=E2=96=92=CA=82C=D2=8AC=C3=878=E2=96=92=C3=83=E2=96=92=CB=A3=E2=96=92=E2=96=
=92=E2=96=92=E2=96=92B=E2=96=92=E2=96=92=E2=96=92B=CB=96=E2=96=92=E2=96=92=
=E2=96=92v=E2=96=92=E2=96=92=D3=975=E2=96=92=E2=96=92=E2=96=92lx]=E2=96=92=
O=E2=96=92O=E2=96=92=E2=96=92=E2=96=92=E2=96=92XUVZ}=E2=96=92H=E2=96=92=E2=
=96=92=E2=96=92=E2=96=92=CF=97=E2=96=92GZ
>> =
=E2=96=92=E2=96=92=E2=96=92BR=EF=BF=BD=E2=96=92=CA=97=E2=96=92=E2=96=92=E2=
=96=92=E2=96=92=EF=BF=BD=E2=96=92=C6=96H=E2=96=92=E2=96=92]=E2=96=92}
>>=20
>> I tried changing the console to vidconsole, but looks like that is =
not supported:
>>=20
>>=20
>> Yes. That's just for bios.
>>=20
>> What does is hw.uart.console in the boot loader? In fact can you =
share all the loader's variables.
>>=20
>> Also, can you do show-efi so we can see what ConOut is set to?
>>=20
>> The above sure looks like a baud issue. There's automatic things tgat =
override stuff. This isn't the PC where comconsole settings do much. =
Comconsole is an alias for eficom, for example.
>>=20
>> Thanks
>>=20
>> Warner
>> Output in boot loader, when set console=3D"vidconsole":
>> console vidconsole is unavailable=20
>> no valid consoles!=20
>> Available consoles: efi eficom comconsole
>>=20
>> So, i am not sure what the issue is here to get the FreeBSD =
installed. Any pointers are much appreciated!!
>> Thanks,
>> Arjun
>> From: Mark Millard <marklmi@yahoo.com>
>> Sent: Thursday, June 20, 2024 10:07 PM
>> To: Anantharam, Arjun <arjun.anantharam@intel.com>; FreeBSD ARM List =
<freebsd-arm@freebsd.org>
>> Subject: Re: FreeBSD OS installation stuck after selecting Boot =
installer Anantharam, Arjun <arjun.anantharam_at_intel.com> wrote on
>> Date: Thu, 20 Jun 2024 17:07:29 UTC :
>>=20
>> > If the screenshots are not visible, i have included below errors =
seen in screenshot:
>> >
>> > =46rom 1st screenshot(below errors seen during FreeBSD installation =
after selecting Boot installer):
>> > Loading kernel..
>> > Loading configured modules..
>> > cant find 'etc/hostid'
>> > cant find 'boot/entropy'
>>=20
>> FYI, the 2 lines:
>>=20
>> > No valid device tree blob found!
>> > Warning! Trying to fire up the kernel, but no device tree blob =
found!
>>=20
>> are normal messages for ACPI booting. They are not error messages and
>> do not indicate a stop of the ACPI-based boot sequence.
>>=20
>> I've never liked that working ACPI booting puts out those 2 messages.
>>=20
>> > "Garbage displayed"
>> >
>> > =46rom 2nd Screenshot:
>> > ACPI option enabled by default in FreeBSD
>>=20
>> =3D=3D=3D
>> Mark Millard
>> marklmi at yahoo.com
>>=20
>=20
=3D=3D=3D
Mark Millard
marklmi at yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2E74CC9A-D653-49A8-8A12-788806554F49>