Date: Thu, 23 Mar 2000 23:49:13 -0500 From: "Matthew Emmerton" <matt@gsicomp.on.ca> To: <freebsd-scsi@freebsd.org>, <freebsd-smp@freebsd.org> Subject: Problems with 3.4-RELEASE SMP + AIC7870 Message-ID: <001401bf954c$5fd5bf40$1200a8c0@gsicomp.on.ca>
next in thread | raw e-mail | index | archive | help
I'm running a 3.4-RELEASE SMP system, equipped with 2xP133 and an onboard
AIC7870 PCI SCSI controller, and recently have been plagued by a whack of
SCB errors.
dmesg (relevant parts only)
---------------------------
FreeBSD 3.4-RELEASE #0: Sun Jan 16 18:14:14 EST 2000
root@gabby.gsicomp.on.ca:/usr/src-3.4/sys/compile/GABBY.20000116.01
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 50331648 (49152K bytes)
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02d4000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02d409c.
ahc0: <Adaptec aic7870 SCSI adapter> rev 0x03 int a irq 11 on pci0.11.0
ahc0: aic7870 Wide Channel A, SCSI Id=7, 16/255 SCBs
Intel Pentium detected, installing workaround for F00F bug
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled, logging disabled
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST32430N 0510> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2049MB (4197405 512 byte sectors: 64H 32S/T 2049C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
This configuration was rock-solid for it's "normal" workload, but whenever I
attempted to do something that bashed the disk (such as building gcc), I
would get errors like these:
/kernel: swap_pager: indefinate wait buffer: device 0x30411, blkno: 8688,
size 8192
/kernel: (probe0:ahc0:0:0:0): SCB 0xa - timed out in message out phase,
SEQADDR == 0x151
The system would then freeze.
Then things got worse. To supplement my existing 2 GB Seagate SCSI-2 drive,
I dropped in a 1 GB Fujitsu SCSI-2 drive. (It's running in SCSI-1 mode for
debugging purposes.)
da1 at ahc0 bus 0 target 2 lun 0
da1: <FUJITSU M2694ES-512 8134> Fixed Direct Access SCSI-CCS device
da1: 3.300MB/s transfers
da1: 1033MB (2117025 512 byte sectors: 64H 32S/T 1033C)
Now, I consistently get (on an almost daily basis) messages like the
following:
/kernel: Timedout SCB handled by another timeout
and the system locks for 10-15 seconds, and then goes along it's merry way;
in addition, the errors reported above now occur with greater frequency.
Scanning the archives, I came upon these threads:
http://www.freebsd.org/cgi/getmsg.gsi?fetch=66633+69631+/usr/local/www/db/te
xt/1998/freebsd-scsi/19980308.freebsd-scsi
http://www.freebsd.org/cgi/getmsg.gsi?fetch=123866+125897+/usr/local/www/db/
text/1998/freebsd-scsi/19980531.freebsd-scsi
which suggested UP mode, which seemed to work just fine. However, my
thought was the "problem" that was seen 1.5 years ago, presumably using some
hybrid 2.2-stable + CAM codebase, would have been fixed by now. (And yes,
I've checked my cables and termination.)
If something thinks that there definitely is a timing problem or something
with the SMP + AIC code, I'd be willing to hack away at it - mind you,
"remote gdb" is a totally foreign concept to me.
Thanks,
--
Matthew Emmerton
GSI Computer Services
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001401bf954c$5fd5bf40$1200a8c0>