Date: Fri, 13 Apr 2012 15:39:09 -0700 From: Jose Amengual <jose.amengual@gmail.com> To: freebsd-hardware <freebsd-hardware@freebsd.org> Subject: Adaptec 2020ZCR Supermicro server. Message-ID: <CAGrZ=ddXrYLj-zkufc=Oo-yCwV8Pp0FVnfLoCxWyPNy_8UqkhA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi Guys. First of all this is my setup : Freebsd 9.0 Supermicro Server Motherboard : Supermicro X7DB8 6 x Cheetah=AE 15K.5 Ultra320 SCSI 146-GB Hard Drive Adaptec 2020ZCR [7373 bios] ( Supermicro branded ) I installed freebsd in a RAID1 setup created using the controller utility and I had no problems. But when I went to create my ZFS Raid I was not able to see the drives attached with the right driver I just saw this : pass1 at aacp0 bus 0 scbus0 target 1 lun 0 pass1: <SEAGATE ST336754LC 0005> Fixed Uninstalled SCSI-3 device pass1: 0KB/s transfers pass2 at aacp0 bus 0 scbus0 target 2 lun 0 pass2: <SEAGATE ST336754LC 0005> Fixed Uninstalled SCSI-3 device pass2: 0KB/s transfers pass3 at aacp0 bus 0 scbus0 target 3 lun 0 pass3: <SEAGATE ST336754LC 0005> Fixed Uninstalled SCSI-3 device pass3: 0KB/s transfers pass5 at aacp1 bus 0 scbus1 target 0 lun 0 pass5: <SEAGATE ST3146855LC 0003> Fixed Uninstalled SCSI-3 device pass5: 0KB/s transfers pass6 at aacp1 bus 0 scbus1 target 1 lun 0 pass6: <SEAGATE ST3146855LC 0003> Fixed Uninstalled SCSI-3 device pass6: 0KB/s transfers pass7 at aacp1 bus 0 scbus1 target 2 lun 0 pass7: <SEAGATE ST3146855LC 0003> Fixed Uninstalled SCSI-3 device pass7: 0KB/s transfers pass8 at aacp1 bus 0 scbus1 target 3 lun 0 pass8: <SEAGATE ST3146855LC 0003> Fixed Uninstalled SCSI-3 device And when I try to use the pass devices of course I got an error, so then I looked to cam control. newdevserver# camcontrol devlist <SEAGATE ST336754LC 0005> at scbus0 target 0 lun 0 (pass0) <SEAGATE ST336754LC 0005> at scbus0 target 1 lun 0 (pass1) <SEAGATE ST336754LC 0005> at scbus0 target 2 lun 0 (pass2) <SEAGATE ST336754LC 0005> at scbus0 target 3 lun 0 (pass3) <SUPER GEM318 0> at scbus0 target 6 lun 0 (ses0,pass4) <SEAGATE ST3146855LC 0003> at scbus1 target 0 lun 0 (pass5) <SEAGATE ST3146855LC 0003> at scbus1 target 1 lun 0 (pass6) <SEAGATE ST3146855LC 0003> at scbus1 target 2 lun 0 (pass7) <SEAGATE ST3146855LC 0003> at scbus1 target 3 lun 0 (pass8) <SUPER GEM318 0> at scbus1 target 6 lun 0 (ses1,pass9) <MATSHITA DVD-ROM SR-8178 PZ16> at scbus2 target 1 lun 0 (cd0,pass10) <PepperC Virtual Disc 1 0.01> at scbus3 target 0 lun 0 (cd1,pass11) So it looks like the driver are recognized but for some reason they don't have the right driver attached to them ? It could be possible that I'm missing some other configuration that I'm not aware of but base on my other server that I have working : <ADAPTEC Virtual SGPIO 0 0001> at scbus2 target 0 lun 0 (ses0,pass3) <WDC WD1002FAEX-00Z3A0 0956> at scbus5 target 0 lun 0 (ada0,pass4) <WDC WD1002FAEX-00Z3A0 05.01D05> at scbus5 target 1 lun 0 (ada1,pass5) I can see the pass through device per hard drive and the correct ada designation to each so I guess that is something to do with the driver but I'm not sure. The drivers is the 2020ZCR are not configured in raid/volume or anything like it. Anyone had the sam problem ? can someone give me some ideas so that I can use the individual drivers for ZFS ? pciconf -vl output of the raid card : aac0@pci0:4:1:0: class=3D0x010400 card=3D0x028a9005 chip=3D0x0285900= 5 rev=3D0x02 hdr=3D0x00 vendor =3D 'Adaptec' device =3D 'AAC-RAID' class =3D mass storage subclass =3D RAID Thanks.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGrZ=ddXrYLj-zkufc=Oo-yCwV8Pp0FVnfLoCxWyPNy_8UqkhA>