Date: Sun, 10 Apr 2016 11:59:20 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: =?utf-8?Q?=22Wei=C3=9F=2C_Dr=2E_J=C3=BCrgen=22?= <weiss@uni-mainz.de> Cc: Erik Moe <e.moe@rcn.com>, freebsd-arm <freeBSD-arm@freebsd.org> Subject: Re: Odroidc1+ stuck booting Message-ID: <4FABD8D2-CB5F-4220-A6F8-1707DF08E215@cs.huji.ac.il> In-Reply-To: <a2285c9d127c4c5f8d86b0faad365a52@uni-mainz.de> References: <687E2129-BE66-4CC9-9B30-D8DFB7A2FEF6@cs.huji.ac.il> <982FE02C-7BEC-4CA0-BCAE-FE6CC5C9CFB4@rcn.com> <B39CD871-7BE5-44EA-816A-42A80E34D8A7@rcn.com> <EEAFAE63-3550-4862-924C-B8E7B68FC62E@cs.huji.ac.il> <CCC86C18-EE51-4A24-A9A1-4FDCBB28B198@cs.huji.ac.il> <F5CCEBD7-0C43-415C-97E5-35BEC63BEDC6@rcn.com> <77D2CAED-B44A-4602-8C70-C3DD0A8D089C@cs.huji.ac.il> <6FF9B11B-1F63-49FC-8195-58B4B963F204@rcn.com> <a2285c9d127c4c5f8d86b0faad365a52@uni-mainz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi > On 9 Apr 2016, at 22:52, Wei=C3=9F, Dr. J=C3=BCrgen = <weiss@uni-mainz.de> wrote: >=20 > Hi, >=20 > I have a C1+ and just booted a FreeBSD current kernel not older than > a week without problems. >=20 > fatload mmc 0:1 0x21000000 kernel.bin > go 0x21000000 >=20 my kernel loads at a different address! btw, what kernconf are you using? I had to comment out the random stuff, since it was giving compiler errors. > Maybe you could try a different sd card, as it seems to get stuck at > a time when it is probing the sd cards. it=E2=80=99s booting from it, and i have tried several cards, BTW, it also gives the same error when booting from the net. my guts make me think it=E2=80=99s in the *dtb stuff. which is loaded = into=20 the kernel and not read of the sd card. thanks, danny >=20 > Regards >=20 > Juergen >=20 >=20 >=20 >> -----Original Message----- >> From: owner-freebsd-arm@freebsd.org = [mailto:owner-freebsd-arm@freebsd.org] On Behalf Of >> Erik Moe >> Sent: Tuesday, April 05, 2016 10:53 PM >> To: Daniel Braniss >> Cc: freebsd-arm >> Subject: Re: Odroidc1+ stuck booting >>=20 >> That=E2=80=99s correct I have a C1, not a C1+. >>=20 >> Erik >>=20 >>> On Apr 4, 2016, at 6:02 AM, Daniel Braniss <danny@cs.huji.ac.il> = wrote: >>>=20 >>> I assume you have a C1 not a C1+, because I=E2=80=99m doing the = same, >>> and no luck. I know that the board is ok because It boots and runs = Daisuke-san=E2=80=99s image. >>> danny >>>=20 >>>> On 31 Mar 2016, at 15:29, Erik Moe <e.moe@rcn.com> wrote: >>>>=20 >>>> Everything I=E2=80=99m doing I =E2=80=9Cborrowed=E2=80=9D from = here: >> https://wiki.freebsd.org/FreeBSD/arm/Odroid-C1 >>>>=20 >>>> I=E2=80=99m using the stock ODROIDC1 kernel config in head which = builds the FTD statically into >> the kernel from src/sys/boot/fdt/dts/arm/odroidc1.dts. I liberated = u-boot from >> ArchLinuxARM-odroid-c1-latest.tar.gz. My boot.ini is simply this: >>>>=20 >>>> ODROIDC-UBOOT-CONFIG >>>>=20 >>>> setenv bootcmd "fatload mmc 0 0x100000 kernel.bin; go 0x100000" >>>> run bootcmd >>>>=20 >>>> Erik >>>>=20 >>>>> On Mar 31, 2016, at 1:36 AM, Daniel Braniss <danny@cs.huji.ac.il> = wrote: >>>>>=20 >>>>> oh, and if you feel generous your ODROIDC1.conf =E2=80=A6 >>>>> thanks, >>>>> danny >>>>>=20 >>>>>> On 31 Mar 2016, at 09:31, Daniel Braniss <danny@cs.huji.ac.il> = wrote: >>>>>>=20 >>>>>> hi Erik, >>>>>> can you send me your >>>>>> uboot >>>>>> boot.ini >>>>>> *.dtb >>>>>> I=E2=80=99m pretty sure the issue is somewhere there then. >>>>>> thanks, >>>>>> danny >>>>>>=20 >>>>>>> On 31 Mar 2016, at 09:11, Erik Moe <e.moe@rcn.com> wrote: >>>>>>>=20 >>>>>>> I built a new image for my odriod-c1 for ssd from the latest = sources and had no >> issues and didn=E2=80=99t need to tweet anything. I don=E2=80=99t = have and odriod-c1+, but my >> understanding is there isn=E2=80=99t much difference between the two. = I am using the serial >> console. >>>>>>>=20 >>>>>>> = QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;INIT:10;BOOT:1;INIT:0;READ:0;CHECK:0;PA= SS:1; >>>>>>> = ----------------------------------------------------------------------- >>>>>>> * Welcome to Hardkernel's ODROID-C... (Built at 19:33:00 Dec 8 = 2014) * >>>>>>> = ----------------------------------------------------------------------- >>>>>>> CPU : AMLogic S805 >>>>>>> MEM : 1024MB (DDR3@792MHz) >>>>>>> BID : HKC13C0001 >>>>>>> S/N : HKC1CC037EBE4620 >>>>>>> 0x0000009f >>>>>>> check SD_boot_type:0x1 card_type:0x1 >>>>>>> Loading U-boot...success. >>>>>>>=20 >>>>>>>=20 >>>>>>> U-boot(odroidc@) (Jun 12 2015 - 17:31:14) >>>>>>>=20 >>>>>>> DRAM: 1 GiB >>>>>>> relocation Offset is: 2ff1c000 >>>>>>> MMC: SDCARD: 0, eMMC: 1 >>>>>>> IR init is done! >>>>>>> vpu clk_level =3D 3 >>>>>>> set vpu clk: 182150000Hz, readback: 182150000Hz(0x701) >>>>>>> mode =3D 6 vic =3D 4 >>>>>>> set HDMI vic: 4 >>>>>>> mode is: 6 >>>>>>> viu chan =3D 1 >>>>>>> config HPLL >>>>>>> config HPLL done >>>>>>> reconfig packet setting done >>>>>>> MMC read: dev # 0, block # 33984, count 12288 ... 12288 blocks = read: OK >>>>>>> There is no valid bmp file at the given address >>>>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>>>>>> Vendor: Man 035344 Snr 29cfee4e Rev: 8.0 Prod: SL08G >>>>>>> Type: Removable Hard Disk >>>>>>> Capacity: 7580.0 MB =3D 7.4 GB (15523840 x 512) >>>>>>> ------------------------------------------------------------ >>>>>>> Partition Start Sector Num Sectors Type >>>>>>> 1 1134 131040 6 >>>>>>> 2 132174 15391666 a5 >>>>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>>>>>> Net: Meson_Ethernet >>>>>>> init suspend firmware done. (ret:0) >>>>>>> Hit Enter key to stop autoboot -- : 0 >>>>>>> exit abortboot: 0 >>>>>>> reading boot.ini >>>>>>>=20 >>>>>>> 98 bytes read >>>>>>> Loading boot.ini from mmc0:1 (vfat) >>>>>>> Executing the script... >>>>>>> setenv bootcmd "fatload mmc 0 0x100000 kernel.bin; go 0x100000" >>>>>>> run bootcmd >>>>>>> reading kernel.bin >>>>>>>=20 >>>>>>> 6055396 bytes read >>>>>>> ## Starting application at 0x00100000 ... >>>>>>> ARM Debug Architecture v7 >>>>>>> 2 watchpoints and 3 breakpoints supported >>>>>>> KDB: debugger backends: ddb >>>>>>> KDB: current backend: ddb >>>>>>> Copyright (c) 1992-2016 The FreeBSD Project. >>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, = 1993, 1994 >>>>>>> The Regents of the University of California. All rights = reserved. >>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>>>>> FreeBSD 11.0-CURRENT #4 43026a8(master)-dirty: Thu Mar 31 = 04:14:32 CDT 2016 >>>>>>> root@dora:/usr/home/emoe/Projects/ARM/odroid- >> c1/obj/arm.armv6hf/usr/home/emoe/Projects/ARM/src/sys/ODROIDC1 arm >>>>>>> FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) = (based on LLVM 3.8.0) >>>>>>> WARNING: WITNESS option enabled, expect reduced performance. >>>>>>> VT: init without driver. >>>>>>> Preloaded elf kernel "kernel" at 0xc07c5d6c. >>>>>>> CPU: Cortex A5 rev 1 (Cortex-A core) >>>>>>> Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 = Security_Ext >>>>>>> WB enabled LABT branch prediction disabled >>>>>>> LoUU:2 LoC:2 LoUIS:2 >>>>>>> Cache level 1: >>>>>>> 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc >>>>>>> 32KB/32B 2-way instruction cache Read-Alloc >>>>>>> real memory =3D 1073737728 (1023 MB) >>>>>>> avail memory =3D 1038233600 (990 MB) >>>>>>> Physical memory chunk(s): >>>>>>> 0x00001000 - 0x3fffffff, 1023 MB ( 262143 pages) >>>>>>> Excluded memory regions: >>>>>>> 0x00100000 - 0x00853fff, 7 MB ( 1876 pages) NoAlloc >>>>>>> Static device mappings: >>>>>>> 0xc1100000 - 0xc12fffff mapped at VA 0xffd00000 >>>>>>> 0xc4200000 - 0xc42fffff mapped at VA 0xffc00000 >>>>>>> 0xc4300000 - 0xc43fffff mapped at VA 0xffb00000 >>>>>>> 0xc8000000 - 0xc80fffff mapped at VA 0xffa00000 >>>>>>> 0xc8100000 - 0xc81fffff mapped at VA 0xff900000 >>>>>>> 0xc9000000 - 0xc97fffff mapped at VA 0xff100000 >>>>>>> 0xd9000000 - 0xd90fffff mapped at VA 0xff000000 >>>>>>> 0xda000000 - 0xda0fffff mapped at VA 0xfef00000 >>>>>>> Amlogic aml8726-m8b SoC >>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >>>>>>> ULE: setup cpu 0 >>>>>>> ULE: setup cpu 1 >>>>>>> ULE: setup cpu 2 >>>>>>> ULE: setup cpu 3 >>>>>>> random: entropy device external interface >>>>>>> null: <full device, null device, zero device> >>>>>>> openfirm: <Open Firmware control device> >>>>>>> mem: <memory> >>>>>>> nfslock: pseudo-device >>>>>>> crypto: <crypto core> >>>>>>> random: harvesting attach, 8 bytes (4 bits) from nexus0 >>>>>>> ofwbus0: <Open Firmware Device Tree> >>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from ofwbus0 >>>>>>> clkmsr0: <Amlogic aml8726 clkmsr> mem 0xc1108758-0xc1108767 on = simplebus0 >>>>>>> clkmsr0: bus clock 159 MHz >>>>>>> random: harvesting attach, 8 bytes (4 bits) from clkmsr0 >>>>>>> l2cache0: <PL310 L2 cache controller> mem 0xc4200000-0xc4200fff = irq 0 on ofwbus0 >>>>>>> l2cache0: Part number: 0x3, release: 0x9 >>>>>>> l2cache0: L2 Cache enabled: 512KB/32B 8 ways >>>>>>> l2cache0: Early BRESP response: disabled >>>>>>> l2cache0: Instruction prefetch: disabled >>>>>>> l2cache0: Data prefetch: enabled >>>>>>> l2cache0: Non-secure interrupt control: disabled >>>>>>> l2cache0: Non-secure lockdown: disabled >>>>>>> l2cache0: Share override: disabled >>>>>>> l2cache0: Double linefill: disabled >>>>>>> l2cache0: Instruction prefetch: disabled >>>>>>> l2cache0: Data prefetch: enabled >>>>>>> l2cache0: Double linefill on WRAP request: disabled >>>>>>> l2cache0: Prefetch drop: disabled >>>>>>> l2cache0: Incr double Linefill: disabled >>>>>>> l2cache0: Not same ID on exclusive sequence: disabled >>>>>>> l2cache0: Prefetch offset: 0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from l2cache0 >>>>>>> scu0: <ARM Snoop Control Unit> mem 0xc4300000-0xc4300fff on = simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from scu0 >>>>>>> cpuconfig0: <Amlogic CPU Config> mem 0xd901ff80-0xd901ff8f on = simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cpuconfig0 >>>>>>> ccm0: <Amlogic aml8726 ccm> mem 0xc1104140-0xc1104153 on = simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from ccm0 >>>>>>> pinctrl0: <Amlogic aml8726 pinctrl> mem = 0xc11080b0-0xc11080d7,0xc11080e8- >> = 0xc11080ff,0xc1108120-0xc1108137,0xc8100014-0xc8100017,0xc810002c-0xc81000= 2f,0xc810002c- >> 0xc810002f on simplebus0 >>>>>>> Processing 3 pin-config node(s) in pinctrl-0 for = pinctrl@c11080b0 >>>>>>> Processing 1 pin-config node(s) in pinctrl-0 for mmc@c1108c20 >>>>>>> Processing 1 pin-config node(s) in pinctrl-0 for sdxc@c1108e00 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from pinctrl0 >>>>>>> gic0: <ARM Generic Interrupt Controller> mem = 0xc4301000-0xc4301fff,0xc4300100- >> 0xc43001ff on ofwbus0 >>>>>>> ofwbus0: no default resources for rid =3D 0, type =3D 1 >>>>>>> gic0: pn 0x390, arch 0x1, rev 0x1, implementer 0x43b irqs 256 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gic0 >>>>>>> wdt0: <Amlogic aml8726 WDT> mem 0xc1109900-0xc1109907 irq 2 on = simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from wdt0 >>>>>>> timer0: <Amlogic aml8726 timer> mem 0xc1109940-0xc1109957 irq 1 = on ofwbus0 >>>>>>> Event timer "aml8726 timer A" frequency 1000000 Hz quality 1000 >>>>>>> Timecounter "aml8726 timer E" frequency 1000000 Hz quality 1000 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from timer0 >>>>>>> uart0: <Amlogic aml8726 UART> mem 0xc81004c0-0xc81004d7 irq 3 on = simplebus0 >>>>>>> uart0: RTS iflow, CTS oflow >>>>>>> uart0: console (115200,n,8,1) >>>>>>> uart0: fast interrupt >>>>>>> uart0: PPS capture mode: DCDinvalid >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uart0 >>>>>>> uart1: <Amlogic aml8726 UART> mem 0xc11084c0-0xc11084d7 irq 4 on = simplebus0 >>>>>>> uart1: RTS iflow, CTS oflow >>>>>>> uart1: fast interrupt >>>>>>> uart1: PPS capture mode: DCDinvalid >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uart1 >>>>>>> uart2: <Amlogic aml8726 UART> mem 0xc11084dc-0xc11084f3 irq 5 on = simplebus0 >>>>>>> uart2: RTS iflow, CTS oflow >>>>>>> uart2: fast interrupt >>>>>>> uart2: PPS capture mode: DCDinvalid >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uart2 >>>>>>> uart3: <Amlogic aml8726 UART> mem 0xc1108700-0xc1108717 irq 6 on = simplebus0 >>>>>>> uart3: RTS iflow, CTS oflow >>>>>>> uart3: fast interrupt >>>>>>> uart3: PPS capture mode: DCDinvalid >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uart3 >>>>>>> simplebus0: <i2c@c8100500> mem 0xc8100500-0xc810051f irq 7 = disabled compat >> amlogic,meson6-i2c (no driver attached) >>>>>>> aml8726_iic0: <Amlogic aml8726 I2C> mem 0xc1108500-0xc110851f = irq 8 on simplebus0 >>>>>>> iicbb0: <I2C bit-banging driver> on aml8726_iic0 >>>>>>> iicbus0: <Philips I2C bus> on iicbb0 master-only >>>>>>> iic0: <I2C generic I/O> on iicbus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from iic0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from iicbus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from iicbb0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_iic0 >>>>>>> aml8726_iic1: <Amlogic aml8726 I2C> mem 0xc11087c0-0xc11087df = irq 9 on simplebus0 >>>>>>> iicbb1: <I2C bit-banging driver> on aml8726_iic1 >>>>>>> iicbus1: <Philips I2C bus> on iicbb1 master-only >>>>>>> iic1: <I2C generic I/O> on iicbus1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from iic1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from iicbus1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from iicbb1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_iic1 >>>>>>> simplebus0: <ir-receiver@c8100480> mem 0xc8100480-0xc810049f irq = 10 disabled compat >> amlogic,meson6-ir (no driver attached) >>>>>>> simplebus0: <spi@c1108c80> mem 0xc1108c80-0xc1108cff disabled = compat amlogic,meson6- >> spifc (no driver attached) >>>>>>> simplebus0: <ethernet@c9410000> mem = 0xc9410000-0xc941ffff,0xc1108108-0xc110810b irq >> 11 disabled compat amlogic,meson6-dwmac (no driver attached) >>>>>>> rtc0: <Amlogic aml8726 RTC> mem 0xc8100740-0xc8100753 irq 12 on = simplebus0 >>>>>>> rtc0: crystal oscillator check failed >>>>>>> device_attach: rtc0 attach returned 6 >>>>>>> gpio0: <Amlogic aml8726 GPIO> mem = 0xc8100024-0xc8100027,0xc8100024- >> 0xc8100027,0xc8100028-0xc810002b on simplebus0 >>>>>>> gpiobus0: <OFW GPIO bus> on gpio0 >>>>>>> gpioled0: <GPIO led> at pin 13 on gpiobus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioled0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus0 >>>>>>> gpioc0: <GPIO controller> on gpio0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpio0 >>>>>>> gpio1: <Amlogic aml8726 GPIO> mem = 0xc1108054-0xc1108057,0xc1108058- >> 0xc110805b,0xc110805c-0xc110805f on simplebus0 >>>>>>> gpiobus1: <OFW GPIO bus> on gpio1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus1 >>>>>>> gpioc1: <GPIO controller> on gpio1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpio1 >>>>>>> gpio2: <Amlogic aml8726 GPIO> mem = 0xc110806c-0xc110806f,0xc1108070- >> 0xc1108073,0xc1108074-0xc1108077 on simplebus0 >>>>>>> gpiobus2: <OFW GPIO bus> on gpio2 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus2 >>>>>>> gpioc2: <GPIO controller> on gpio2 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc2 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from gpio2 >>>>>>> aml8726_mmc0: <Amlogic aml8726 MMC> mem 0xc1108c20-0xc1108c3f = irq 13 on simplebus0 >>>>>>> mmc0: <MMC/SD bus> on aml8726_mmc0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from mmc0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_mmc0 >>>>>>> aml8726_sdxc0: <Amlogic aml8726-m8 SDXC> mem = 0xc1108e00-0xc1108e3b irq 14 on >> simplebus0 >>>>>>> mmc1: <MMC/SD bus> on aml8726_sdxc0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from mmc1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_sdxc0 >>>>>>> simplebus0: <rng@c1108100> mem 0xc1108100-0xc1108107 compat = amlogic,aml8726-rng (no >> driver attached) >>>>>>> usbphy0: <Amlogic aml8726-m8 USB PHY> mem 0xc1108800-0xc110881f = on simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from usbphy0 >>>>>>> usbphy1: <Amlogic aml8726-m8 USB PHY> mem 0xc1108820-0xc110883f = on simplebus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from usbphy1 >>>>>>> dwcotg0: <DWC OTG 2.0 integrated USB controller> mem = 0xc9040000-0xc907ffff irq 15 on >> simplebus0 >>>>>>> usbus0 on dwcotg0 >>>>>>> dwcotg0: usbpf: Attached >>>>>>> random: harvesting attach, 8 bytes (4 bits) from usbus0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from dwcotg0 >>>>>>> dwcotg1: <DWC OTG 2.0 integrated USB controller> mem = 0xc90c0000-0xc90fffff irq 16 on >> simplebus0 >>>>>>> usbus1 on dwcotg1 >>>>>>> dwcotg1: usbpf: Attached >>>>>>> random: harvesting attach, 8 bytes (4 bits) from usbus1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from dwcotg1 >>>>>>> dwc0: <Amlogic Meson Gigabit Ethernet Controller> mem = 0xc9410000-0xc9411fff irq 11 >> on simplebus0 >>>>>>> miibus0: <MII bus> on dwc0 >>>>>>> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 = on miibus0 >>>>>>> rgephy0: OUI 0x00e04c, model 0x0011, rev. 6 >>>>>>> rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, >> 1000baseT-FDX-master, auto >>>>>>> random: harvesting attach, 8 bytes (4 bits) from rgephy0 >>>>>>> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 = on miibus0 >>>>>>> rgephy1: OUI 0x00e04c, model 0x0011, rev. 6 >>>>>>> rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, >> 1000baseT-FDX-master, auto >>>>>>> random: harvesting attach, 8 bytes (4 bits) from rgephy1 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from miibus0 >>>>>>> dwc0: bpf attached >>>>>>> dwc0: Ethernet address: 62:73:64:5d:6a:ec >>>>>>> random: harvesting attach, 8 bytes (4 bits) from dwc0 >>>>>>> fb0: <Amlogic aml8726 FB> mem 0xc8006048-0xc8006053,0xc1106800- >> 0xc1106bff,0xc1107400-0xc11077ff irq 17,18,19,20 on simplebus0 >>>>>>> fbd0 on fb0 >>>>>>> VT: initialize with new VT driver "fb". >>>>>>> random: harvesting attach, 8 bytes (4 bits) from fbd0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from fb0 >>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0 >>>>>>> cpu0: <Open Firmware CPU> on cpulist0 >>>>>>> cpu0: missing 'clock-frequency' property >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cpu0 >>>>>>> cpu1: <Open Firmware CPU> on cpulist0 >>>>>>> cpu1: missing 'clock-frequency' property >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cpu1 >>>>>>> cpu2: <Open Firmware CPU> on cpulist0 >>>>>>> cpu2: missing 'clock-frequency' property >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cpu2 >>>>>>> cpu3: <Open Firmware CPU> on cpulist0 >>>>>>> cpu3: missing 'clock-frequency' property >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cpu3 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cpulist0 >>>>>>> ofwbus0: <clk@0> compat fixed-clock (no driver attached) >>>>>>> ofwbus0: <leds> compat gpio-leds (no driver attached) >>>>>>> cryptosoft0: <software crypto> >>>>>>> crypto: assign cryptosoft0 driver id 0, flags 100663296 >>>>>>> crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 >>>>>>> crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 >>>>>>> random: harvesting attach, 8 bytes (4 bits) from cryptosoft0 >>>>>>> procfs registered >>>>>>> Timecounters tick every 10.000 msec >>>>>>> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 >>>>>>> usbus0: 480Mbps High Speed USB v2.0 >>>>>>> IPsec: Initialized Security Association Processing. >>>>>>> lo0: bpf attached >>>>>>> mmc0: Probing bus >>>>>>> usbus1: 480Mbps High Speed USB v2.0 >>>>>>> mmc0: SD 2.0 interface conditions: OK >>>>>>> mmc0: SD probe: OK (OCR: 0x40ff8000) >>>>>>> mmc0: Current OCR: 0x00ff8000 >>>>>>> ugen1.1: <DWCOTG> at usbus1 >>>>>>> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> = on usbus1 >>>>>>> ugen0.1: <DWCOTG> at usbus0 >>>>>>> uhub1: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> = on usbus0 >>>>>>> mmc0: Probing cards >>>>>>> mmc0: New card detected (CID 035344534c3038478029cfee4e00f900) >>>>>>> mmc0: New card detected (CSD 400e00325b5900003b377f800a404000) >>>>>>> mmc0: Card at relative address 0xaaaa added: >>>>>>> mmc0: card: SDHC SL08G 8.0 SN 29CFEE4E MFG 09/2015 by 3 SD >>>>>>> mmc0: bus: 4bit, 50MHz, high speed timing >>>>>>> mmc0: memory: 15523840 blocks, erase sector 8192 blocks >>>>>>> mmc0: setting transfer rate to 39.750MHz (high speed timing) >>>>>>> mmcsd0: 8GB <SDHC SL08G 8.0 SN 29CFEE4E MFG 09/2015 by 3 SD> at = mmc0 39.7MHz/4bit/8- >> block >>>>>>> random: harvesting attach, 8 bytes (4 bits) from mmcsd0 >>>>>>> mmc1: Probing bus >>>>>>> GEOM: new disk mmcsd0 >>>>>>> mmc0: setting bus width to 4 bits >>>>>>> GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on = 4194304 bytes >>>>>>> GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on = 4194304 bytes >>>>>>> mmc1: SD probe: failed >>>>>>> mmc1: MMC probe: failed >>>>>>> mmc1: Current OCR: 0x00000000 >>>>>>> mmc1: No compatible cards found on bus >>>>>>> Release APs >>>>>>> WARNING: WITNESS option enabled, expect reduced performance. >>>>>>> Trying to mount root from ufs:mmcsd0s2 []... >>>>>>> GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on = 4194304 bytes >>>>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not = aligned on 4194304 >> bytes >>>>>>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not = aligned on 4194304 >> bytes >>>>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not = aligned on 4194304 >> bytes >>>>>>> warning: no time-of-day clock registered, system time will not = be set accurately >>>>>>> start_init: trying /sbin/init >>>>>>> uhub0: 1 port with 1 removable, self powered >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uhub0 >>>>>>> uhub1: 1 port with 1 removable, self powered >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uhub1 >>>>>>> ugen1.2: <vendor 0x05e3> at usbus1 >>>>>>> uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, = addr 2> on usbus1 >>>>>>> uhub2: MTT enabled >>>>>>> Growing root partition to fill device >>>>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not = aligned on 4194304 >> bytes >>>>>>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not = aligned on 4194304 >> bytes >>>>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not = aligned on 4194304 >> bytes >>>>>>> mmcsd0s2 resized >>>>>>> growfs: superblock not recognized >>>>>>> /etc/rc: WARNING: hostid: unable to figure out a UUID from DMI = data, generating a >> new one >>>>>>> uhub2: 4 ports with 4 removable, self powered >>>>>>> random: harvesting attach, 8 bytes (4 bits) from uhub2 >>>>>>> Setting hostuuid: 214610b1-f72e-11e5-8203-df073412266c. >>>>>>> Setting hostid: 0x373425ad. >>>>>>> No suitable dump device was found. >>>>>>> Starting file system checks: >>>>>>> /dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS >>>>>>> /dev/mmcsd0s2: clean, 36687 free (103 frags, 4573 blocks, 0.0% = fragmentation) >>>>>>> GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on = 4194304 bytes >>>>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not = aligned on 4194304 >> bytes >>>>>>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not = aligned on 4194304 >> bytes >>>>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not = aligned on 4194304 >> bytes >>>>>>> Mounting local file systems:. >>>>>>> Setting hostname: freebsd. >>>>>>> Setting up >> = harvesting:[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,K= EYBOARD,ATTACH,C >> ACHED >>>>>>> Feeding entropy:random: unblocking device. >>>>>>> . >>>>>>> dwc0: link state changed to DOWN >>>>>>> Starting Network: lo0 dwc0. >>>>>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu = 16384 >>>>>>> options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> >>>>>>> inet6 ::1 prefixlen 128 >>>>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 >>>>>>> inet 127.0.0.1 netmask 0xff000000 >>>>>>> groups: lo >>>>>>> nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> >>>>>>> dwc0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> = metric 0 mtu 1500 >>>>>>> options=3D80008<VLAN_MTU,LINKSTATE> >>>>>>> ether 62:73:64:5d:6a:ec >>>>>>> media: Ethernet autoselect (none) >>>>>>> status: no carrier >>>>>>> nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>>>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat >>>>>>> Starting devd. >>>>>>> add net fe80::: gateway ::1 >>>>>>> add net ff02::: gateway ::1 >>>>>>> add net ::ffff:0.0.0.0: gateway ::1 >>>>>>> add net ::0.0.0.0: gateway ::1 >>>>>>> Generating host.conf. >>>>>>> Waiting 30s for the default route interface: .....(no carrier) >>>>>>> Creating and/or trimming log files. >>>>>>> Starting syslogd. >>>>>>> Clearing /tmp (X related). >>>>>>> Updating motd:. >>>>>>> Mounting late file systems:. >>>>>>> Configuring vt: blanktime. >>>>>>> Generating RSA host key. >>>>>>> 2048 SHA256:efid4fCpKZlmdi69b18qj+SNx2mSPQNr6ourB/w9tPw = root@freebsd (RSA) >>>>>>> Generating ECDSA host key. >>>>>>> 256 SHA256:bpBVM0B9a3xDhmy3bvoC4OuELAJ4fvJd+p3tNwgia6k = root@freebsd (ECDSA) >>>>>>> Generating ED25519 host key. >>>>>>> 256 SHA256:VHMKoDA1Zv50CmxiLJwTIvg58S2DuBg6zj2VFXDGq/M = root@freebsd (ED25519) >>>>>>> Performing sanity check on sshd configuration. >>>>>>> Could not load host key: /etc/ssh/ssh_host_dsa_key >>>>>>> Starting sshd. >>>>>>> Could not load host key: /etc/ssh/ssh_host_dsa_key >>>>>>> Starting cron. >>>>>>> Starting background file system checks in 60 seconds. >>>>>>> lock order reversal: >>>>>>> 1st 0xc4499814 ufs (ufs) @ = /usr/home/emoe/Projects/ARM/src/sys/kern/vfs_subr.c:2498 >>>>>>> 2nd 0xd90169a0 bufwait (bufwait) @ >> /usr/home/emoe/Projects/ARM/src/sys/ufs/ffs/ffs_vnops.c:263 >>>>>>> 3rd 0xc45c15d4 ufs (ufs) @ = /usr/home/emoe/Projects/ARM/src/sys/kern/vfs_subr.c:2498 >>>>>>> stack backtrace: >>>>>>> mount: /dev/mmcsd0s2: Device busy >>>>>>>=20 >>>>>>> Thu Mar 31 10:49:29 UTC 2016 >>>>>>>=20 >>>>>>> FreeBSD/arm (freebsd) (ttyu0) >>>>>>>=20 >>>>>>> login: >>>>>>>=20 >>>>>>>> On Mar 30, 2016, at 7:47 PM, Erik Moe <e.moe@rcn.com> wrote: >>>>>>>>=20 >>>>>>>> I was able to build a working odroid-c1 image not too long ago. = Let me pull the >> latest sources and see if something has changed. >>>>>>>>=20 >>>>>>>> Erik >>>>>>>>=20 >>>>>>>>> On Mar 30, 2016, at 2:24 AM, Daniel Braniss = <danny@cs.huji.ac.il> wrote: >>>>>>>>>=20 >>>>>>>>> Hi, >>>>>>>>> Managed to make a bootable SD, cross compile world/kernel, >>>>>>>>> but the kernel startup gets stuck, I can=E2=80=99t even get = into the debugger. >>>>>>>>> any help/hints most welcome :-) >>>>>>>>> btw, I can also boot via the network, cutting down the debug = cycle considerably. >>>>>>>>> thanks, >>>>>>>>> danny >>>>>>>>> PS: here is the console output >>>>>>>>> <s1> >>>>>>>>> _______________________________________________ >>>>>>>>> freebsd-arm@freebsd.org mailing list >>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>>>>>>> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >>>>>>>> _______________________________________________ >>>>>>>> freebsd-arm@freebsd.org mailing list >>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>>>>>> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >>>>>>>=20 >>>>>>=20 >>>>>> _______________________________________________ >>>>>> freebsd-arm@freebsd.org mailing list >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>>>> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >>>>>=20 >>>>=20 >>>=20 >>=20 >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FABD8D2-CB5F-4220-A6F8-1707DF08E215>