Date: Sun, 16 Jan 2011 13:58:26 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: Aryeh Friedman <aryeh.friedman@gmail.com> Cc: freebsd-hackers@freebsd.org, Mark Felder <feld@feld.me> Subject: Re: Android development (was Re: best way to run -RELEASE and -CURRENT on the same machine) Message-ID: <201101161358.26075.hselasky@c2i.net> In-Reply-To: <AANLkTikS24_1n7cJgU0LKBsvzCHTcbpcBabwv2E=YH1v@mail.gmail.com> References: <AANLkTinL%2BrVkn=F-Smdf0_PpP6E%2B0FCUmhDWG758%2B2eh@mail.gmail.com> <201101161327.29692.hselasky@c2i.net> <AANLkTikS24_1n7cJgU0LKBsvzCHTcbpcBabwv2E=YH1v@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 16 January 2011 13:30:33 Aryeh Friedman wrote: > On Sun, Jan 16, 2011 at 7:27 AM, Hans Petter Selasky <hselasky@c2i.net> wrote: > > On Sunday 16 January 2011 13:20:39 Aryeh Friedman wrote: > >> On Sun, Jan 16, 2011 at 7:07 AM, Hans Petter Selasky <hselasky@c2i.net> > > > > wrote: > >> > On Sunday 16 January 2011 12:59:17 Aryeh Friedman wrote: > >> >> On Sun, Jan 16, 2011 at 6:48 AM, Hans Petter Selasky > >> >> <hselasky@c2i.net> > >> > > >> > wrote: > >> >> > On Sunday 16 January 2011 11:49:28 Hans Petter Selasky wrote: > >> >> >> if_cdce kernel, > >> >> > > >> >> > if_cdce kernel module > >> >> > > >> >> > --HPS > >> >> > >> >> flosoft-stable# kldload if_cdce > >> >> kldload: can't load if_cdce: File exists > >> > > >> > Any ueX network interfaces? > >> > >> None > >> > >> > Also: > > And what about: > > > > usbconfig -d X.Y dump_curr_config_desc > > flosoft-stable# usbconfig -d 5.2 dump_curr_config_desc > ugen5.2: <Android Phone HTC> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=ON > > > Configuration index 0 > > bLength = 0x0009 > bDescriptorType = 0x0002 > wTotalLength = 0x0037 > bNumInterfaces = 0x0002 > bConfigurationValue = 0x0001 > iConfiguration = 0x0000 <no string> > bmAttributes = 0x0080 > bMaxPower = 0x0080 > > Interface 0 > bLength = 0x0009 > bDescriptorType = 0x0004 > bInterfaceNumber = 0x0000 > bAlternateSetting = 0x0000 > bNumEndpoints = 0x0002 > bInterfaceClass = 0x0008 > bInterfaceSubClass = 0x0006 > bInterfaceProtocol = 0x0050 > iInterface = 0x0000 <no string> > > Endpoint 0 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0001 <OUT> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > Endpoint 1 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0081 <IN> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > > Interface 1 > bLength = 0x0009 > bDescriptorType = 0x0004 > bInterfaceNumber = 0x0001 > bAlternateSetting = 0x0000 > bNumEndpoints = 0x0002 > bInterfaceClass = 0x00ff > bInterfaceSubClass = 0x0042 > bInterfaceProtocol = 0x0001 > iInterface = 0x0000 <no string> > > Endpoint 0 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0002 <OUT> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > Endpoint 1 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0082 <IN> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 Looks like interface 1 is the ADB one (vendor specific). If the ADB client is not using LibUSB then you might get it working by adding the vendor ID and product ID to sys/dev/usb/serial/u3g.c as listed by dump_device_desc . A /dev/cuaU0 will then be created which you can use to transfer data. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201101161358.26075.hselasky>