Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 Dec 2001 13:38:43 -0500
From:      "Joe & Fhe Barbish" <barbish@a1poweruser.com>
To:        "FBSD Questions" <questions@FreeBSD.ORG>
Subject:    modem gets 'bad file description' error msg
Message-ID:  <LPBBIGIAAKKEOEJOLEGOIEDFCKAA.barbish@a1poweruser.com>

next in thread | raw e-mail | index | archive | help
I have just bought this zoom internal pci 56k modem with
onboard controller and dsp. The boot log looks like the
FBSD system has recognized the modem and rolled it to
com4 because com1 & 2 all ready have external modems on
them. When I start ppp interactive and set device to /dev/cuaa3
and then go into term, I get 'bad file description' error msg.
What am I missing here?


Kernel source
# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? port IO_COM3 irq 5
device          sio3    at isa? port IO_COM4 irq 9


First boot with zoom modem msgs from dmesg.boot

Zoom modem
found-> vendor=0x11c1, dev=0x0480, revid=0x00
        class=07-03-03, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=9
        map[10]: type 1, range 32, base e3001000, size  8
        map[14]: type 1, range 32, base 0000dc00, size  8
        map[18]: type 1, range 32, base 0000e000, size  8
        map[1c]: type 1, range 32, base 0000e400, size  3


sio0: irq maps: 0x3 0x403 0x3 0x3
sio0: <ActionTec 56k FAX PCI Modem> port
0xe400-0xe407,0xe000-0xe0ff,0xdc00-0xdcff mem 0xe3001000-0xe30010ff irq 10
at device 18.0 on pci0
sio0: moving to sio4
sio4: type 16550A


sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A

sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A

sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: irq maps: 0x41 0x41 0x41 0x41
sio2: probe failed test(s): 0 1 2 4 6 7 9
sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0

sio3: configured irq 9 not in bitmap of probed irqs 0
sio3: irq maps: 0x41 0x41 0x41 0x41
sio3: probe failed test(s): 0 1 2 4 6 7 9
sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LPBBIGIAAKKEOEJOLEGOIEDFCKAA.barbish>