From owner-freebsd-scsi Tue Dec 10 05:36:34 1996 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.4/8.8.4) id FAA00992 for freebsd-scsi-outgoing; Tue, 10 Dec 1996 05:36:34 -0800 (PST) Received: from who.cdrom.com (who.cdrom.com [204.216.27.3]) by freefall.freebsd.org (8.8.4/8.8.4) with ESMTP id FAA00952 for ; Tue, 10 Dec 1996 05:36:27 -0800 (PST) Received: from caliban.dihelix.com (caliban.mrtc.org [199.4.33.251]) by who.cdrom.com (8.7.5/8.6.11) with ESMTP id DAA13136 for ; Tue, 10 Dec 1996 03:44:27 -0800 (PST) Received: (from langfod@localhost) by caliban.dihelix.com (8.8.3/8.8.3) id BAA00201 for freebsd-scsi@freebsd.org; Tue, 10 Dec 1996 01:43:25 -1000 (HST) Message-Id: <199612101143.BAA00201@caliban.dihelix.com> Subject: does ncr driver support Ultra SCSI? To: freebsd-scsi@freebsd.org Date: Tue, 10 Dec 1996 01:43:25 -1000 (HST) From: "David Langford" X-blank-line: This space intentionaly left blank. X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have a fast/wide SCSI-II NCR based controller (from Coporate Systems) with an IBM 32160 ultra SCSI drive hooked up. I noticed that the system negotiates a 10Mb clock with the drive. Is this something in the driver or do I have things configured wrong? Thanks, David Langford langfod@dihelix.com dmesg output follows: FreeBSD 3.0-CURRENT #2: Tue Dec 10 01:32:11 HST 1996 ncr0 rev 2 int a irq 9 on pci0:11 mapreg[10] type=1 addr=00006000 size=0100. mapreg[14] type=0 addr=f0804000 size=0100. reg20: virtual=0xf5434000 physical=0xf0804000 size=0x100 ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 and 8..15 (V2 pl23 95/09/07) (ncr0:0:0): "IBM DORS-32160 S82C" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 2063MB (4226725 512 byte sectors) sd0(ncr0:0:0): with 6703 cyls, 5 heads, and an average 126 sectors/track (ncr0:2:0): "ARCHIVE Python 25588-XXX 2.96" type 1 removable SCSI 2 st0(ncr0:2:0): Sequential-Access st0(ncr0:2:0): asynchronous. st0(ncr0:2:0): M_REJECT received (2:8). density code 0x13, drive empty (ncr0:6:0): "SANYO CRD-254S 1.02" type 5 removable SCSI 2 cd0(ncr0:6:0): CD-ROM cd0(ncr0:6:0): asynchronous. cd present [37284 x 2048 byte records] probe0(ncr0:9:0): scsi_cmd probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 0,0,0,0,0,0-[0 bytes] probe0(ncr0:9:0): scsi_cmd probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 12,0,0,0,2c,0-[44 bytes] ------------------------------ 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 016: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 032: 00 00 00 00 00 00 00 00 00 00 00 00 ------------------------------