Date: Wed, 03 Jun 1998 10:26:22 -0500 From: Doug Ledford <dledford@dialnet.net> To: Chris Worley <cworley@host1.in-motion.net> Cc: aic7xxx@FreeBSD.ORG Subject: Re: More Adaptec 2940UW Fun Message-ID: <35756B1E.B045A51B@dialnet.net> References: <199805290223.VAA12277@host1.in-motion.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Chris Worley wrote:
>
> OK, now it least tries to detect devices under Linux 2.1.104-1, but
> after 50 minutes of command timeouts, it had yet to get past Device
> 0 LUN 5.
>
> This info is off the actual chip, but Linux still says the chip is something
> else
>
> +-----------+
> | Adaptec |
> | AIC-7880Q |
> | BQWA740 |
> | 740111 |
> | BC9594.1 |
> | HONG KONG |
> +-----------+
>
> alamar:~# cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: QUANTUM Model: VIKING 2.3 NSE Rev: 8808
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: PLEXTOR Model: CD-ROM PX-6XCS Rev: 1a08
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 03 Lun: 00
> Vendor: IOMEGA Model: ZIP 100 Rev: J.03
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: iomega Model: jaz 1GB Rev: G.72
> Type: Direct-Access ANSI SCSI revision: 02
>
> Hopefully I get to use this controller soon.
Do me a favor, and let me know if the 5.0.18 driver on my ftp site helps
with this or not.
--
Doug Ledford <dledford@dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
NOTE: I'm just now starting to recover from the Linux-Expo. Most
importantly, I'm just now getting around to answering a lot
of my email. So, if your message has lain around un-answered
for many days, I apologize.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35756B1E.B045A51B>