Date: Mon, 25 Sep 2006 14:30:19 +0200 (CEST) From: kama <kama@pvp.se> To: Per olof Ljungmark <peo@intersonic.se> Cc: freebsd-proliant@freebsd.org Subject: Re: DL380G2 instability Message-ID: <20060925142639.Q38572@ns1.as.pvp.se> In-Reply-To: <4517C9AE.6000107@intersonic.se> References: <4517C9AE.6000107@intersonic.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Have you used "Linux" as the OS configuration in the bios? I had to switch from "Other" to "Linux" to get SMP to work properly. Also try to use 5.x to see if it runs better. I have had a G3 that runs solid on 5.5, but when installing 6.1 I get reboots when loaded. /Bjorn On Mon, 25 Sep 2006, Per olof Ljungmark wrote: > Hi, > > I have tried now for some time to get FBSD running on a couple of > DL380G2 with dual PIII 1.4G but never got it right. The boxes are > identical in both hw setup and the way they behave so I figured this may > be FreeBSD related, not a hardware fault. > > Proliant DL380G2, 1G RAM, RAID5, built-in controller and nic's. > Tried 6.1-REL, 6-STABLE and -current as of a couple of weeks ago. > > > To sum it up: > > 1) ACPI and SMP enabled. The systems will do spontaneous reboots, the > more work they do the more often it happens. > > 2) ACPI disabled, SMP enabled. Systems will lock up hard as soon as any > serious work is done like compiling. Requires power cycling. > > 3) Uniprocessor seems ok at all times. > > Have tried aslo various settings for MPTable+OS in BIOS but not much of > a change. Changed IRQ's. Reset BIOS. > > Anyone out there who has this model running SMP OK? > > TIA for any help, > > Per olof > > > _______________________________________________ > freebsd-proliant@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-proliant > To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060925142639.Q38572>