Date: Thu, 28 Feb 2013 23:33:04 +0000 (UTC) From: Eitan Adler <eadler@FreeBSD.org> To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r41064 - in head/en_US.ISO8859-1/books/handbook: advanced-networking disks install mirrors multimedia printing security serialcomms Message-ID: <201302282333.r1SNX4er094673@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: eadler Date: Thu Feb 28 23:33:03 2013 New Revision: 41064 URL: http://svnweb.freebsd.org/changeset/doc/41064 Log: Remove references / support of &os; 7.x ppp-and-slip not touched because of ongoing work to revise that chapter. Reviewed by: doc@ Approved by: bcr (mentor) Modified: head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml head/en_US.ISO8859-1/books/handbook/disks/chapter.xml head/en_US.ISO8859-1/books/handbook/install/chapter.xml head/en_US.ISO8859-1/books/handbook/mirrors/chapter.xml head/en_US.ISO8859-1/books/handbook/multimedia/chapter.xml head/en_US.ISO8859-1/books/handbook/printing/chapter.xml head/en_US.ISO8859-1/books/handbook/security/chapter.xml head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml Modified: head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -867,22 +867,6 @@ route_net2="-net 192.168.1.0/24 192.168. wrapper.</para> </note> - <para>Under &os; 7.X, with a device driver you need to - also bring in the 802.11 networking support required by the - driver. For the &man.ath.4; driver these are at least the - &man.wlan.4;, <literal>wlan_scan_ap</literal> and - <literal>wlan_scan_sta</literal> modules; the &man.wlan.4; - module is automatically loaded with the wireless device - driver, the remaining modules must be loaded at boot time - in <filename>/boot/loader.conf</filename>:</para> - - <programlisting>wlan_scan_ap_load="YES" -wlan_scan_sta_load="YES"</programlisting> - - <para>Since &os; 8.0, these modules are part of the - base &man.wlan.4; driver which is dynamically loaded with - the adapter driver.</para> - <para>With that, you will need the modules that implement cryptographic support for the security protocols you intend to use. These are intended to be dynamically loaded on @@ -922,13 +906,6 @@ device ath_hal # pci/cardbus c options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors device ath_rate_sample # SampleRate tx rate control for ath</programlisting> - <para>Both following lines are also required by - &os; 7.X, other &os; versions do not need - them:</para> - - <programlisting>device wlan_scan_ap # 802.11 AP mode scanning -device wlan_scan_sta # 802.11 STA mode scanning</programlisting> - <para>With this information in the kernel configuration file, recompile the kernel and reboot your &os; machine.</para> @@ -979,21 +956,6 @@ freebsdap 00:11:95:c3:0d:ac 1 require you to mark the interface up again.</para> </note> - <note> - <para>Under &os; 7.X, the adapter device, for example - <devicename><replaceable>ath0</replaceable></devicename>, - is used directly instead of the - <devicename>wlan<replaceable>0</replaceable></devicename> - device. This requires you to replace the both previous - lines with:</para> - - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput></screen> - - <para>In the rest of this document, &os; 7.X users - will need to change the command and configuration lines - according to that scheme.</para> - </note> - <para>The output of a scan request lists each BSS/IBSS network found. Beside the name of the network, <literal>SSID</literal>, we find the @@ -1096,13 +1058,6 @@ freebsdap 00:11:95:c3:0d:ac 1 <programlisting>wlans_ath0="wlan0" ifconfig_wlan0="DHCP"</programlisting> - <note> - <para>As previously mentioned, &os; 7.X will only - require a line related to the adapter device:</para> - - <programlisting>ifconfig_ath0="DHCP"</programlisting> - </note> - <para>If there are multiple access points and you want to select a specific one, you can select it by its SSID:</para> Modified: head/en_US.ISO8859-1/books/handbook/disks/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/disks/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/disks/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -3040,13 +3040,7 @@ Filesystem 1K-blocks Used Avail Capacity kernel configuration.</para> <para>Next, enable disk quotas in - <filename>/etc/rc.conf</filename>. On &os; 7.X and - earlier, this is done by adding the line:</para> - - <programlisting>enable_quotas="YES"</programlisting> - - <para>On &os; 8.0-RELEASE and later, add the following - line instead:</para> + <filename>/etc/rc.conf</filename>:</para> <programlisting>quota_enable="YES"</programlisting> @@ -4028,10 +4022,6 @@ Device 1K-blocks Used Av linkend="network-communication">&os; networking</link>.</para> </listitem> - - <listitem> - <para>Use &os; 8.1-RELEASE or newer.</para> - </listitem> </itemizedlist> <para>The <acronym>HAST</acronym> project was sponsored by The Modified: head/en_US.ISO8859-1/books/handbook/install/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/install/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/install/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -4556,7 +4556,7 @@ Please press any key to reboot.</screen> <para>That directory will normally contain the following images:</para> <table frame="none"> - <title>FreeBSD 7.<replaceable>X</replaceable> and 8.<replaceable>X</replaceable> + <title>&os; 8.<replaceable>X</replaceable> ISO Image Names and Meanings</title> <tgroup cols="2"> Modified: head/en_US.ISO8859-1/books/handbook/mirrors/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/mirrors/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/mirrors/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -232,7 +232,7 @@ <application>CTM</application> distribution lists. &a.ctm-cvs-cur.name; supports the entire CVS tree. &a.ctm-src-cur.name; supports the head of the development - branch. &a.ctm-src-7.name; supports the 7.X release branch, + branch. &a.ctm-src-9.name; supports the 9.X release branch, etc.. (If you do not know how to subscribe yourself to a list, click on the list name above or go to &a.mailman.lists.link; and click on the list that you wish to Modified: head/en_US.ISO8859-1/books/handbook/multimedia/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/multimedia/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/multimedia/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -1677,10 +1677,7 @@ bktr0: Pinnacle/Miro TV, Philips SECAM t <application>SANE</application> has a <ulink url="http://www.sane-project.org/sane-supported-devices.html">supported devices</ulink> list that can provide you with information - about the support for a scanner and its status. On systems - prior to &os; 8.X the - &man.uscanner.4; manual page also provides a list of supported - USB scanners.</para> + about the support for a scanner and its status.</para> </sect2> <sect2> @@ -1704,16 +1701,6 @@ device uhci device ohci device ehci</programlisting> - <para>On systems prior to &os; 8.X, the following line is - also needed:</para> - - <programlisting>device uscanner</programlisting> - - <para>On these versions of &os;, the &man.uscanner.4; device - driver provides support for the USB scanners. Since - &os; 8.0, this support is directly provided by - the &man.libusb.3; library.</para> - <para>After rebooting with the correct kernel, plug in your USB scanner. A line showing the detection of your @@ -1722,14 +1709,9 @@ device ehci</programlisting> <screen>ugen0.2: <EPSON> at usbus0</screen> - <para>or on a &os; 7.X system:</para> - - <screen>uscanner0: EPSON EPSON Scanner, rev 1.10/3.02, addr 2</screen> - <para>These messages show that our scanner is using - either <filename>/dev/ugen0.2</filename> or - <filename>/dev/uscanner0</filename> as device node according - to the &os; version we run. For this example, a + either <filename>/dev/ugen0.2</filename> + as device node. For this example, a &epson.perfection; 1650 USB scanner was used.</para> </sect3> @@ -1973,22 +1955,6 @@ device `epson:/dev/uscanner0' is a Epson add path ugen0.2 mode 0660 group usb add path usb/0.2.0 mode 0666 group usb</programlisting> - <para>&os; 7.X users will probably need the following - lines with the correct device node - <filename>/dev/uscanner0</filename>:</para> - - <programlisting>[system=5] -add path uscanner0 mode 660 group usb</programlisting> - - <para>Then add the following to - <filename>/etc/rc.conf</filename> and reboot the - machine:</para> - - <programlisting>devfs_system_ruleset="system"</programlisting> - - <para>More information regarding these lines can be found in the - &man.devfs.8; manual page.</para> - <para>Now, one will just have to add users to the <groupname><replaceable>usb</replaceable></groupname> group to allow the access to the scanner:</para> Modified: head/en_US.ISO8859-1/books/handbook/printing/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/printing/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/printing/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -212,15 +212,6 @@ <sect1 id="printing-intro-setup"> <title>Basic Setup</title> - <warning> - <para>As of &os; 8.0, device nodes for serial ports have been - renamed from - <filename>/dev/ttyd<replaceable>N</replaceable></filename> to - <filename>/dev/ttyu<replaceable>N</replaceable></filename>. - &os; 7.X users will have to adapt the following - documentation according to these changes.</para> - </warning> - <para>To use printers with the <application>LPD</application> spooling system, you will need to set up both your printer hardware and the <application>LPD</application> software. This @@ -1465,15 +1456,6 @@ $%&'()*+,-./01234567 <sect1 id="printing-advanced"> <title>Advanced Printer Setup</title> - <warning> - <para>As of &os; 8.0, device nodes for serial ports have been - renamed from - <filename>/dev/ttyd<replaceable>N</replaceable></filename> to - <filename>/dev/ttyu<replaceable>N</replaceable></filename>. - &os; 7.X users will have to adapt the following - documentation according to these changes.</para> - </warning> - <para>This section describes filters for printing specially formatted files, header pages, printing across networks, and restricting and accounting for printer usage.</para> Modified: head/en_US.ISO8859-1/books/handbook/security/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/security/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/security/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -645,8 +645,7 @@ turned off, and access to raw devices will be denied. Higher levels restrict even more operations. For a full description of the effect of various secure levels, please read the - &man.security.7; manual page (or the manual page of - &man.init.8; in releases older than &os; 7.0).</para> + &man.security.7; manual page.</para> <note> <para>Bumping the secure level to 1 or higher may cause a few Modified: head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml Thu Feb 28 18:37:51 2013 (r41063) +++ head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml Thu Feb 28 23:33:03 2013 (r41064) @@ -59,17 +59,6 @@ <sect1 id="serial"> <title>Introduction</title> - <warning> - <para>As of &os; 8.0, device nodes for serial ports have been - renamed from - <filename>/dev/cuad<replaceable>N</replaceable></filename> to - <filename>/dev/cuau<replaceable>N</replaceable></filename> and - from - <filename>/dev/ttyd<replaceable>N</replaceable></filename> to - <filename>/dev/ttyu<replaceable>N</replaceable></filename>. - &os; 7.X users will have to adapt the following - documentation according to these changes.</para> - </warning> <!-- XXX Write me! --> <sect2 id="serial-terminology">
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201302282333.r1SNX4er094673>