Date: Mon, 6 Jul 2009 16:29:56 +0000 From: "Paul B. Mahol" <onemda@gmail.com> To: Atheer Elobadi <atheer.elobadi@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: can't get atheros ar2413 to connect under freebsd 7.2 Message-ID: <3a142e750907060929r4c33e313s2bd5b3781f46c123@mail.gmail.com> In-Reply-To: <9a537e0c0907060856n692285c6q3a0c4358d8a448b8@mail.gmail.com> References: <9a537e0c0907031944h66e783fdsfccc832aa9e4fa80@mail.gmail.com> <4ad871310907050624o4467dbf0n756c8c6b99b9d3eb@mail.gmail.com> <9a537e0c0907050751p505a66ack42f95b247eb9e6c1@mail.gmail.com> <9a537e0c0907051027u59d8949cw7f4abffca76d9c51@mail.gmail.com> <9a537e0c0907051338o5c551489kcffee9d59f60e83c@mail.gmail.com> <3a142e750907051417m65162841sa2eae53e53fbfc3f@mail.gmail.com> <9a537e0c0907051425x172494dfo4b9b57346671498a@mail.gmail.com> <3a142e750907051558g11a0c289g60a82e9a93adfd2f@mail.gmail.com> <9a537e0c0907060856n692285c6q3a0c4358d8a448b8@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 7/6/09, Atheer Elobadi <atheer.elobadi@gmail.com> wrote: > i run 'wpa_supplicant -ddq -i ath0 -c /etc/wpa_supplicant.conf': > > Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver > 'default' ctrl_interface 'N/A' bridge 'N/A' > Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' > Reading configuration file '/etc/wpa_supplicant.conf' > Priority group 0 > id=0 ssid='ALEX' > Initializing interface (2) 'ath0' > EAPOL: SUPP_PAE entering state DISCONNECTED > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > EAPOL: SUPP_BE entering state INITIALIZE > EAP: EAP entering state DISABLED > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > Own MAC address: 00:19:7d:be:8c:65 > wpa_driver_bsd_set_wpa: enabled=1 > wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1 > wpa_driver_bsd_del_key: keyidx=0 > wpa_driver_bsd_del_key: keyidx=1 > wpa_driver_bsd_del_key: keyidx=2 > wpa_driver_bsd_del_key: keyidx=3 > wpa_driver_bsd_set_countermeasures: enabled=0 > wpa_driver_bsd_set_drop_unencrypted: enabled=1 > Setting scan request: 0 sec 100000 usec > Added interface ath0 > State: DISCONNECTED -> SCANNING > Starting AP scan (broadcast SSID) > Trying to get current scan results first without requesting a new scan to > speed up initial association > Received 0 bytes of scan results (0 BSSes) > Scan results: 0 > Selecting BSS from priority group 0 > Try to find WPA-enabled AP > Try to find non-WPA AP > No suitable AP found. > Setting scan request: 0 sec 0 usec > Starting AP scan (broadcast SSID) > Received 0 bytes of scan results (0 BSSes) > Scan results: 0 > Selecting BSS from priority group 0 > Try to find WPA-enabled AP > Try to find non-WPA AP > No suitable AP found. > Setting scan request: 5 sec 0 usec > Starting AP scan (broadcast SSID) > > and it keeps on like that.. Does # ifconfig ath0 up and trying several times: # ifconfig ath0 list scan shows any results? Is anthing new displayed on console(vty0) ? -- Paul
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3a142e750907060929r4c33e313s2bd5b3781f46c123>