Date: Sat, 31 Jan 2004 12:54:16 -0500 From: Jeff Elkins <bsd@elkins.org> To: freebsd-questions@freebsd.org Subject: Re: Using the ATAPI/CAM Driver Message-ID: <200401311254.16755.bsd@elkins.org> In-Reply-To: <200401311725.55042.freebsd-questions@webteckies.org> References: <200401302148.28075.bsd@elkins.org> <200401310531.40935.bsd@elkins.org> <200401311725.55042.freebsd-questions@webteckies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday 31 January 2004 11:25 am, Melvyn Sopacua wrote: > On Saturday 31 January 2004 11:31, Jeff Elkins wrote: > > That succeeded in freezing the permissions from boot to boot, but I still > > get the error "cd9660: /dev/cd0: Device not configured" when I try to > > mount a cd via the passthrough device: mount -t cd9660 /dev/cd0 /cdrom > > > > I _can_ mount cds using the /dev/acd* devices, while using the /dev/cd* > > devices for writing. Is this the way atapi cdrws are supposed to work > > under freebsd? > > So, is cam compiled into the kernel? Do you have the xpt SCSI driver? > If cam is configured correctly, there should be mentioning of cd0 > in /var/run/dmesg.boot and the cd's should be listed via: > > camcontrol devlist kathix# camcontrol devlist <DMI MultiFlash 3.00> at scbus0 target 0 lun 0 (pass0,da0) <DMI MultiFlash 3.00> at scbus0 target 0 lun 1 (pass1,da1) <DMI MultiFlash 3.00> at scbus0 target 0 lun 2 (pass2,da2) <DMI MultiFlash 3.00> at scbus0 target 0 lun 3 (pass3,da3) <SEAGATE ST15230N 0638> at scbus1 target 0 lun 0 (pass4,da4) <PLEXTOR DVDR PX-708A 1.03> at scbus3 target 0 lun 0 (pass5,cd0) <TOSHIBA CD-ROM XM-6202B 1110> at scbus3 target 1 lun 0 (pass6,cd1) cd0 at ata1 bus 0 target 0 lun 0 cd0: <PLEXTOR DVDR PX-708A 1.03> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd1 at ata1 bus 0 target 1 lun 0 cd1: <TOSHIBA CD-ROM XM-6202B 1110> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers Jeff
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401311254.16755.bsd>