Date: Sat, 22 Oct 2005 17:46:25 -0700 From: Nate Lawson <nate@root.org> To: yraffah@savola.com Cc: acpi@freebsd.org Subject: Re: ACPI Problem With Toshiba Tecra A4 Message-ID: <435ADD61.2070702@root.org> In-Reply-To: <1129974909.817.22.camel@RedDevil.savola.com> References: <1128373723.12875.1.camel@RedDevil.savola.com> <4341A8FE.1020502@root.org> <1129974909.817.22.camel@RedDevil.savola.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Yousef Raffah wrote: > On Mon, 2005-10-03 at 14:56 -0700, Nate Lawson wrote: > >>Yousef Raffah wrote: >> >>>Hello Everyone, >>> >>>I've been struggling a lot with acpi but still can't figure out how to >>>have it working properly with FreeBSD >>> >>>I just updated my BIOS to the latest version available from toshiba and >>>tested it with FreeBSD 6, but still with no luck :( >>> >>>Now if I enable >>>acpi_load="YES" >>>in /boot/loader.conf, I can't boot my FreeBSD as the hard disk ad0 >>>doesn't get recognized during boot and the system stops asking me to >>>select the root partition! Which is not available of course. >>> >>>I'm not sure if I can attache my asl file and send it to the list but I >>>have it ready though if someone is willing to look at it. >> >>This part is probably the issue: >> >>>atapci0: <Intel ICH6 SATA150 controller> port >>>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0 >>>atapci0: failed to enable memory mapping! >> >>Try booting with: >>debug.acpi.disabled="sysres" >> > > I'm sorry I didn't check your message earlier... > Just a quick question, should I enable acpi_load="YES" > in /boot/loader.conf and add this line as well in the same file? Just set it at the loader prompt: set debug.acpi.disabled="sysres" If it works, then you can stick it in loader.conf. -- Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?435ADD61.2070702>