Date: Fri, 26 Dec 2003 19:06:21 -0800 (PST) From: Sean Welch <welchsm@earthlink.net> To: ticso@cicely.de Cc: freebsd-hackers@freebsd.org Subject: Re: Unprobed PCI bus on VXPro II chipset Message-ID: <33430057.1072494381079.JavaMail.root@grover.psp.pas.earthlink.net>
next in thread | raw e-mail | index | archive | help
I don't know about that. I seem to recall that this motherboard
has a built-in USB controler but I read somewhere that it was
non-functional. Regardless, I don't have any way to interface to
it (no cables etc from the the board). I saw the two devices and
thought that maybe the onboard and pci slot USBs both were
reporting the same chipset?
I suppose I should poke around in the bios to see if I can disable
the onboard USB (if it does exist). Perhaps that would make the
USB attach...
Sean
-----Original Message-----
From: Bernd Walter <ticso@cicely12.cicely.de>
Sent: Dec 26, 2003 6:34 PM
To: Sean Welch <Sean_Welch@alum.wofford.org>
Cc: John Baldwin <jhb@freebsd.org>, freebsd-hackers@freebsd.org
Subject: Re: Unprobed PCI bus on VXPro II chipset
On Fri, Dec 26, 2003 at 10:54:27AM -0800, Sean Welch wrote:
> That change seems to have done it!!
>
> I left in the extra PCI IDs I had added to pcisupport.c
> and pci_cfgreg.c -- looks like that helps get things
> going. I've got "options PCI_ENABLE_IO_MODES" in
> the kernel. I've also got "device puc" due to a suggestion
> from fbsd_user on freebsd-questions.
>
> The USB card doesn't seem to be attaching but I do see
> the WinTV card!
>
> Any other suggestions based on what you see below?
Still very strange - you have many shadowed host-pci bridges.
> pcib4@pci0:5:0: class=0x060000 card=0x80113388 chip=0x80113388 rev=0x00 hdr=0x00
> pcib5@pci0:5:1: class=0x060100 card=0x80123388 chip=0x80123388 rev=0x00 hdr=0x00
> pcib6@pci0:5:2: class=0x010100 card=0x80133388 chip=0x80133388 rev=0x00 hdr=0x00
> bktr0@pci0:8:0: class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x02 hdr=0x00
> none0@pci0:8:1: class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x02 hdr=0x00
> pcib7@pci0:9:0: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x04 hdr=0x00
This one (class=0x0c0300) is your USB (uhci) controller, but it's
already bogusly attached to pcib7.
Not surprising that uhci(4) didn't take care of it.
--
B.Walter BWCT http://www.bwct.de
ticso@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?33430057.1072494381079.JavaMail.root>