Date: Mon, 2 Feb 2004 23:59:19 +0200 From: "Putinas Piliponis" <pilkis@gmx.net> To: <current@freebsd.org> Subject: atacontrol problems Message-ID: <02b801c3e9d7$cf629250$0464a8c0@spotripoli.local>
next in thread | raw e-mail | index | archive | help
Hi,
just playing with raids on 5.2.1-RC
atacontrol create RAID1 ad6 ad6
ar0 created
atacontrol detach 3
gives panic
I know this is not how i really should create raid, but... if its does =
not complains, it means it allowed.
error message and dmesg:
GEOM: create disk ar0 dp=3D0xc4725de0
ar0: 114473MB <ATA RAID1 array> [14593/255/63] status: READY subdisks:
disk0 READY on ad6 at ata3-master
disk1 READY on ad6 at ata3-master
ad6: deleted from ar0 disk0
ar0: WARNING - mirror lost
GEOM: destroy disk ad6 dp=3D0xc62fba60
ad6: WARNING - removed from configuration
Fatal trap 12: page fault while in kernel mode
cpuid =3D 0; apic id =3D 00
fault virtual address =3D 0x4
fault code =3D supervisor read, page not present
instruction pointer =3D 0x8:0xc045421e
stack pointer =3D 0x10:0xd9cecad8
frame pointer =3D 0x10:0xd9cecafc
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 70226 (atacontrol)
trap number =3D 12
panic: page fault
cpuid =3D 0;=20
boot() called on cpu#0
syncing disks, buffers remaining... 3862 3862 3860 3858 3858 3858 3858 =
3858 3858 3858 3858 3858 3858 3858 3858 3858 3858 3858 3858 3858 3858 =
3858 3858=20
giving up on 3291 buffers
Uptime: 1d2h18m39s
pfs_vncache_unload(): 1 entries remaining
Shutting down ACPI
stray irq9
Automatic reboot in 15 seconds - press a key on the console to abort
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #3: Sun Feb 1 21:01:15 EET 2004
pilkis@freebsd.icnspot.net:/usr/obj/usr/src/sys/freebsd52
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f0000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07f021c.
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2398.86-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf29 Stepping =3D 9
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 536018944 (511 MB)
avail memory =3D 513695744 (489 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00f5100
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - =
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xeec0-0xeedf =
irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef00-0xef1f =
irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef20-0xef3f =
irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef40-0xef5f =
irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 5.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdf00-0xdf3f mem =
0xfeac0000-0xfeadffff,0xfeaee000-0xfeaeefff irq 21 at device 9.0 on pci2
fxp0: Ethernet address 00:02:b3:c8:65:8f
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xde80-0xdebf mem =
0xfe900000-0xfe9fffff,0xfeaed000-0xfeaedfff irq 22 at device 10.0 on =
pci2
fxp1: Ethernet address 00:d0:b7:51:c6:bc
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port =
0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port =
0xef90-0xef9f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 =
irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xefe0 on atapci1
ata2: [MPSAFE]
ata3: at 0xefa0 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to =
100 packets/entry
ipfw2 initialized, divert enabled, rule-based forwarding enabled, =
default to accept, logging unlimited
IP Filter: v3.4.31 initialized. Default =3D pass all, Logging =3D =
enabled
GEOM: create disk ad0 dp=3D0xc46aa360
ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata0-master UDMA100
GEOM: create disk ad2 dp=3D0xc46aa060
ad2: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata1-master UDMA100
GEOM: create disk ad4 dp=3D0xc46f6860
ad4: 114473MB <ST3120022A> [232581/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=3D0xc46abc60
ad6: 114473MB <ST3120022A> [232581/16/63] at ata3-master UDMA100
ar0: WARNING - mirror lost
GEOM: create disk ar0 dp=3D0xc46f71e0
ar0: 114473MB <ATA RAID1 array> [14593/255/63] status: DEGRADED =
subdisks:
disk0 DOWN no device found for this disk
disk1 READY on ad6 at ata3-master
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02b801c3e9d7$cf629250$0464a8c0>