Date: Sat, 16 Feb 2002 03:39:43 +0100 From: =?iso-8859-1?Q?Andreas_B=E4ck?= <anback@telia.com> To: <freebsd-questions@FreeBSD.ORG> Subject: Fatal trap 19 with NCR53C810 Message-ID: <000701c1b693$34cc0c40$4e7943d5@broadside>
next in thread | raw e-mail | index | archive | help
Hello, I am having some problems installing FreeBSD v4.5 on an old AST Premmia GX (http://165.164.76.22/support/summary.asp?pn=501733-019) I have been using as webserver/router/DHCP using Linux. I boot up using the bootdisks (kern, mfsroot), but when I have done the intial kernel configuration, the system stops during the probe with the following message: sym0: <010> port 0xfc00-0xfcff mem 0xfe000000-0xfe0000ff irq 11 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking NMI ISA a0, EISA 0 RAM parity error, likely hardware failure. Fatal trap 19: non-maskable interrupt trap while in kernel mode instruction pointer = 0x8:0xc028f1f7 stack pointer = 0x10:0xc0816d28 frame pointer = 0x10:0xc0816d3c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam trap number = 19 panic: non-maskable interrupt trap This seems to be related to the SCSI controller, because the probing goes well when I disable the NCR53C810. I am certain that there is nothing wrong with the hardware itself, because the sytem has been working flawlessly under Slackware Linux 8.0 for quite some time. System specs follow: 2xIntel P133 CPU 80 MB RAM NCR53C810 embedded SCSI controller AMD AM2100/AM1500t Embedded ethernet What do I need to do to get it to work? Sincerely, Andreas Bäck anback@telia.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000701c1b693$34cc0c40$4e7943d5>