Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 Aug 2003 10:02:37 -0600 (MDT)
From:      "Jeremy D. Pavleck" <judge@Pavleck.Com>
To:        Peter Elsner <peter@servplex.com>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: Driver for Onstream ADR2.60 IDE
Message-ID:  <Pine.BSF.4.21.0308290959240.47198-100000@kashmir.thend.org>
In-Reply-To: <5.2.0.9.2.20030829105349.011c4430@mail.servplex.com>

next in thread | previous in thread | raw e-mail | index | archive | help
While we're on the subject - is there any good backup devices in the 60Gb
range for FreeBSD that have a similar cost as the OnStream drive (what was
it again, 300$? something like that?)?
IIRC, my big beef with the OnStream drive (besides the weird format the
driver used and slowness backing up/restoring) was the low quality and low
lifespan of the tapes.
I can pay around $500-$700 for a backup device, I've just never used a
tape device that wasn't a quad-head 400+ tape capacity IBM drive so I'm
not sure as to what would be good for general home backup use of around
60GB a week or so. TIA

******************
Jeremy D. Pavleck
jeremy@pavleck.com



On Fri, 29 Aug 2003, Peter Elsner wrote:

> Short answer: No
> 
> Long answer: No, because OnStream isn't using a standard ATAPI driver for 
> their IDE drives.
> 
> The make use of accessing the drive using very special commands in their 
> proprietary backup
> software.  Without the software the drive won't work.  I have already 
> contacted On Stream about
> this many times, (my boss insisted I get it working with FreeBSD), and to 
> no avail, they will not
> help me unless I'm running Windows.
> 
> Peter Elsner
> 
> 
> At 05:42 PM 8/28/2003 -0700, you wrote:
> >I have an Onstream ADR2.60 IDE backup drive that I would like to start using
> >with my FreeBSD 4.8 system.  At startup I get a message via dmesg that there
> >is no driver for this device..... 'kay.  An hour of searching Google yielded
> >me no closer to a driver, so here I am....
> >
> >Can I use this drive with my system or do I have to bag it?
> >
> >Peter
> >
> >_______________________________________________
> >freebsd-questions@freebsd.org mailing list
> >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
> 
> Peter Elsner <peter@servplex.com>
> Vice President Of Customer Service (And System Administrator)
> 1835 S. Carrier Parkway
> Grand Prairie, Texas 75051
> (972) 263-2080 - Voice
> (972) 263-2082 - Fax
> (972) 489-4838 - Cell Phone
> 
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
> 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0308290959240.47198-100000>