From owner-freebsd-mobile Fri Jan 7 13:50:39 2000 Delivered-To: freebsd-mobile@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 608) id E5AED158C2; Fri, 7 Jan 2000 13:50:35 -0800 (PST) From: "Jonathan M. Bresler" To: jrs@enteract.com Cc: freebsd-mobile@freebsd.org In-reply-to: (message from John Sconiers on Fri, 7 Jan 2000 12:34:44 -0600 (CST)) Subject: Re: Linksys ether fast card...working??(how about netgear 410) Message-Id: <20000107215035.E5AED158C2@hub.freebsd.org> Date: Fri, 7 Jan 2000 13:50:35 -0800 (PST) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > device ed0 is in my kernel. I have verified the card works on windows. > Windows sets the card to irq10 IO range 0300-031f. I have an interupt > available. Was there any specific part of the pccardc your interested in. > I don't have network acccess and i don't think I can copy it to a floppy > and mount it on my other box. I could hand type it. > > JOHN here is my pccard.conf entry irq 8 9 10 # Available memory slots memory 0xd4000 96k # #Linksys EtherFast 10/100 PC Card (PCMPC100) #card "Linksys" "EtherFast 10/100 PC Card (PCM" card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)" config 0x3 "ed0" 10 insert echo Linksys Fast 100-BaseT inserted insert /etc/pccard_ether ed0 remove echo Linksys Fast 100-BaseT removed remove /sbin/ifconfig ed0 delete so here is my cis information for the card instead. please check that yours matches. Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: d4 0a ff Common memory device information: Device number 1, type Function specific, WPS = OFF Speed = 100nS, Memory block size = 8Kb, 2 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 41 00 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 250nS, Memory block size = 512b, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 49 01 ab c1 PCMCIA ID = 0x149, OEM ID = 0xc1ab Tuple #4, code = 0x15 (Version 1 info), length = 50 000: 04 01 4c 69 6e 6b 73 79 73 00 45 74 68 65 72 46 010: 61 73 74 20 31 30 2f 31 30 30 20 50 43 20 43 61 020: 72 64 20 28 50 43 4d 50 43 31 30 30 29 00 00 ff 030: 00 ff Version = 4.1, Manuf = [Linksys],card vers = [EtherFast 10/100 PC Card (PCMPC100)] Addit. info = [] Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 20 00 04 01 Reg len = 2, config register addr = 0x400, last config = 0x20 Registers: X------- Tuple #6, code = 0x1b (Configuration entry), length = 7 000: d0 81 18 45 30 fc be Config index = 0x10(default) Interface byte = 0x81 (I/O) wait signal supported Card decodes 5 address lines, limited 8/16 Bit I/O IRQ modes: Pulse IRQ level = 5 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 01 08 ca 60 00 03 1f Config index = 0x1 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 02 08 ca 60 20 03 1f Config index = 0x2 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 03 08 ca 60 40 03 1f Config index = 0x3 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 04 08 ca 60 80 03 1f Config index = 0x4 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x380 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 05 08 ca 60 00 02 1f Config index = 0x5 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x200 block length = 0x20 Tuple #12, code = 0x1b (Configuration entry), length = 7 000: 06 08 ca 60 20 02 1f Config index = 0x6 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x220 block length = 0x20 Tuple #13, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 40 02 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x240 block length = 0x20 Tuple #14, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #15, code = 0x14 (No link), length = 0 Tuple #16, code = 0xff (Terminator), length = 0 i will be off the net for the next 25 hours. i'll check back then. jmb To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message