Date: Mon, 07 Feb 2000 20:22:09 -0600 From: Jeff Jones <gronesy@home.com> To: questions@freebsd.org Subject: Can't get sound to work Message-ID: <389F7DD1.41C67EA6@home.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------446B9B3D2781E494167EB0E7 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I am attaching a copy of my kernel config file for your suggestions. I have not been able to get sound or the mixer to work since I installed 3.4. I have rebuilt the latest kernel and still nothing. Could you please help? I have a SoundBlaster 16 and can't get the support to compile in the kernel. I have worked with Linux for about a year before trying FreeBSD. I think it is an incredibly well designed system. I have the book "The Complete FreeBSD" but it isn't clear in the areas I need help in. Any help would be greatly appreciated. Sincerely, Jeff Jones --------------446B9B3D2781E494167EB0E7 Content-Type: text/plain; charset=us-ascii; name="Gronesy" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="Gronesy" # # GRONESY -- My personal configuration file. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GRONESY,v 1.143.2.24 1999/12/05 01:56:42 luoqi #Exp $ machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident GRONESY maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller eisa0 controller pci0 # Floppy drives controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # IDE controller and disks options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # ATAPI devices options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 # NCR/Symbios Logic controller ahb0 # EISA AHA1742 family controller ahc0 # AHA2940 and onboard AIC7xxx devices controller amd0 # AMD 53C974 (Teckram DC-390(T)) controller isp0 # Qlogic family controller dpt0 # DPT Smartcache - See LINT for options! controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller aic0 at isa? port ? cam irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI) # Proprietary or custom CD-ROM Interfaces device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 device matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at isa? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device plip0 at ppbus? # TCP/IP over parallel device ppi0 at ppbus? # Parallel port interface device #controller vpo0 at ppbus? # Requires scbus and da0 # PCI Ethernet NICs. device al0 # ADMtek AL981 (``Comet'') device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device mx0 # Macronix 98713/98715/98725 (``PMAC'') device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 device sf0 # Adaptec AIC-6915 DuraLAN (``Starfire'') device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 device ste0 # Sundance ST201 (D-Link DFE-550) device tl0 # Texas Instruments ThunderLAN device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device cs0 at isa? port 0x300 net irq ? # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? net irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun 1 # Packet tunnel pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 1 #Berkeley packet filter # Enable PnP support in the kernel. This allows you to automaticly # attach to PnP cards for drivers that support it and allows you to # configure cards from USERCONFIG. See pnp(4) for more info. #controller pnp0 # # Audio drivers: `snd', `sb', `pas', `gus', `pca' # # #snd: Voxware sound support code #sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum #sbxvi: SoundBlaster 16 # Controls all "VOXWARE" driver sound devices. See Luigi's driver # below for an alternate which may work better for some cards. # controller snd0 device pas0 at isa? port 0x388 irq 10 drq 6 device sb0 at isa? port 0x220 irq 5 drq 1 device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device awe0 at isa? port 0x620 device gus0 at isa? port 0x220 irq 12 drq 1 #device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3 device mss0 at isa? port 0x530 irq 10 drq 1 device css0 at isa? port 0x534 irq 5 drq 1 flags 0x08 device sscape0 at isa? port 0x330 irq 9 drq 0 device trix0 at isa? port 0x330 irq 6 drq 0 device sscape_mss0 at isa? port 0x534 irq 5 drq 1 device opl0 at isa? port 0x388 device mpu0 at isa? port 0x330 irq 6 drq 0 device uart0 at isa? port 0x330 irq 5 # Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!). # You may also wish to enable the pnp controller with this, for pnp # sound cards. # #device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 # Not controlled by `snd' #device pca0 at isa? port "IO_TIMER1" tty --------------446B9B3D2781E494167EB0E7-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?389F7DD1.41C67EA6>