Date: Fri, 12 May 2006 19:11:48 -0500 From: Mark Kane <mark@mkproductions.org> To: freebsd-questions@freebsd.org Subject: Only One SATA Drive Detected Message-ID: <44652444.90404@mkproductions.org>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------020604080506070900050001 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi everyone. I'm trying to reinstall FreeBSD on a machine that had a hard drive failure early this week. I bought two brand new 80GB Seagate SATA drives to do mirroring and started to put things together this afternoon. I didn't know initially if the onboard SATA controller would work or not, so I only opened one of the drives in case I needed to replace them with PATA drives. I installed FreeBSD on the first drive with no problem, so I proceeded to open and put in the second one. I started the install again so I could set up the mirroring, but only one drive was detected. I checked the BIOS and both are detected there, so I booted back into my install of FreeBSD on the one hard drive and got a dmesg, which is attached. I also tried to install with just one drive on the secondary SATA channel, but the install does not detect that drive at all so it cannot continue in that case. I found someone with the same problem (although different drive company), but there was no solution: http://lists.freebsd.org/pipermail/freebsd-hardware/2006-March/003343.html My hardware is: MSI K8NGM2 (nForce4) 2x Seagate 80GB SATA FreeBSD 6.1-RELEASE [i386] So in short, only the primary SATA channel works. Is this fixable? I have not tried 7-CURRENT yet because this is a production workstation, but would be willing to try if you think it would help. Thanks very much in advance! -Mark -- GnuPG Public Key: http://www.mkproductions.org/mk_pubkey.asc Internet Radio: Party107 (Trance/Electronic) - http://www.party107.com Rock 101.9 The Edge (Rock) - http://www.rock1019.net IRC: MIXXnet IRC Network - irc.mixxnet.net (Nick: MIXX941) --------------020604080506070900050001 Content-Type: text/plain; name="dmesg.boot" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.24-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 469565440 (447 MB) avail memory = 450105344 (429 MB) MPTable: <nVidia MCP51G/M > ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 cpu0 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <PCI-PCI bridge> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 3.0 on pci0 pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 4.0 on pci0 pci3: <PCI bus> on pcib3 pci0: <display, VGA> at device 5.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 5 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeadfc00-0xfeadfcff irq 5 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP51 SATA300 controller> port 0xd800-0xd807,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f mem 0xfeadd000-0xfeaddfff irq 5 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib4: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pci4: <PCI bus> on pcib4 pci4: <multimedia, audio> at device 6.0 (no driver attached) pci4: <input device> at device 6.1 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xfebffc00-0xfebffc7f irq 5 at device 7.0 on pci4 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:0a:5e:57:00:75 pci0: <multimedia> at device 16.1 (no driver attached) pci0: <bridge> at device 20.0 (no driver attached) pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xce000-0xce7ff,0xce800-0xcffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) Timecounter "TSC" frequency 1808242238 Hz quality 800 Timecounters tick every 1.000 msec acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR <LITE-ON DVDRW SOHW-1693S/KS06> at ata1-master UDMA33 ad4: 76319MB <Seagate ST3808110AS 3.AAE> at ata2-master SATA300 Trying to mount root from ufs:/dev/ad4s1a --------------020604080506070900050001--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44652444.90404>