Date: Tue, 06 Apr 2021 23:54:38 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 254841] usr.sbin/mpsutil: add functionality (temperature monitoring, PCIe speed etc) Message-ID: <bug-254841-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D254841 Bug ID: 254841 Summary: usr.sbin/mpsutil: add functionality (temperature monitoring, PCIe speed etc) Product: Base System Version: CURRENT Hardware: Any OS: Any Status: New Keywords: patch Severity: Affects Only Me Priority: --- Component: bin Assignee: bugs@FreeBSD.org Reporter: freebsd-ports@dan.me.uk CC: scottl@FreeBSD.org Created attachment 223884 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=3D223884&action= =3Dedit Add functionality to mpsutil The attached patch adds a little functionality to the 'mpsutil' (and theref= ore probably also mprutil). In the 'show adapter' output, it now shows PCIe width and speed, IOC Speed,= and (the reason I wrote this patch) the temperature of the controller. I run LSI 9206-16e cards which are notoriously hot (literally boil water ho= t!) and I wanted to monitor its temperature but this was awkward before. I added the other features because they seemed useful and were already fetc= hed in the same config page as the temperature. (note: the temperature units c= ome from the card itself, although i've only ever seen Celcius) Here's an example output on a LSI 9207-8i card I used for testing the patch: mps0 Adapter: Board Name: SAS9207-8i Board Assembly: H3-25590-00B Chip Name: LSISAS2308 Chip Revision: ALL BIOS Revision: 7.29.00.00 Firmware Revision: 20.00.07.00 Integrated RAID: no PCIe Width/Speed: x8 (5.0 GB/sec) IOC Speed: Full Temperature: 63 C PhyNum CtlrHandle DevHandle Disabled Speed Min Max Device 0 N 1.5 6.0 SAS Initiator 1 N 1.5 6.0 SAS Initiator 2 N 1.5 6.0 SAS Initiator 3 N 1.5 6.0 SAS Initiator 4 0001 0009 N 6.0 1.5 6.0 SAS Initiator 5 0002 000a N 6.0 1.5 6.0 SAS Initiator 6 0003 000b N 6.0 1.5 6.0 SAS Initiator 7 0004 000c N 6.0 1.5 6.0 SAS Initiator --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-254841-227>