Date: Mon, 21 Apr 2008 12:23:04 -0700 From: "Ryan Lackey" <ryan.lackey@gmail.com> To: freebsd-stable@freebsd.org Subject: HP DL145G2 boot problems with 7.0 Message-ID: <5bfab4bc0804211223w34d41326g7350c51da35a1721@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I have 4 HP DL145G2 boxes (dual opteron). I recently upgrded them from
6.2-STABLE to 7.0-RELEASE using cvsup on each, compiling world + kernel.
The upgrade was (fairly painless on two machines, and has broken the other
two machines.
On boot, the broken machines hang somewhere after kbdc and psm, and before
serial driver initialization.
Specifically, I see:
psm0: unable to allocate IRQ
psmcpnp0: PS/2 mouse port irq 12 on acpi0
pm0: ps2 mouse irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: giant-locked
psm0: thread
psm0: model intellimouse explorer....
psm0: config; 0000000000 flags: 000000008, packet size:4
psm0: syncmask:08, syncbits:00
After that, it hangs.
I'm using a 7.0 world, mergemastered, and a kernel compiled on the broken
system, and also a
kernel compiled on one of the working systems and copied over, with the same
config.
(attached)
dmesg from one of the working systems also attached -- same config modulo
RAM and CPU speed.
If I boot using the 6.2 kernel and 7.0 userland, I can ssh in and some
things work, but others don't.
I'm using an IPKVM vs. serial console, so this is slightly more difficult to
debug, plus I have to ask someone
to reboot the machine, vs. using a power cycler.
Any help in debugging this would be most appreciated.
[-- Attachment #2 --]
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...4 4 2 2 2 1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE-p1 #2: Fri Apr 18 23:18:25 UTC 2008
root@athena.sfo.metacolo.net:/usr/obj/usr/src/sys/METACOLO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 270 (2009.27-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
Cores per package: 2
usable memory = 8575275008 (8178 MB)
avail memory = 8280080384 (7896 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-30 on motherboard
ioapic2 <Version 1.1> irqs 31-37 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Apr 18 2008 23:18:13)
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <Cool`n'Quiet K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <Cool`n'Quiet K8> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc8000000-0xc8000fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xc8001000-0xc80010ff irq 21 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x1430-0x1437,0x1424-0x1427,0x1428-0x142f,0x1420-0x1423,0x1410-0x141f mem 0xc8002000-0xc8002fff irq 22 at device 8.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xc9000000-0xc9ffffff,0xd0000000-0xd7ffffff irq 16 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xca000000-0xca00ffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:15:60:96:b0:0f
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xca100000-0xca10ffff irq 19 at device 0.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:15:60:96:b0:0e
bge1: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 1.0 on pci128
pci129: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.0 on pci128
pci134: <ACPI PCI bus> on pcib7
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cryptosoft0: <software crypto> on motherboard
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized. Default = pass all, Logging = disabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled
hptrr: no controller detected.
acd0: DVDR <SONY DVD RW DW-Q58A/UYS3> at ata0-master UDMA33
ad4: 715404MB <Seagate ST3750640AS 3.AAC> at ata2-master SATA150
GEOM_MIRROR: Upgrading metadata on ad4 (v3->v4).
ad6: 715404MB <Seagate ST3750640AS 3.AAC> at ata3-master SATA150
GEOM_MIRROR: Device mirror/gm0 launched (1/2).
GEOM_MIRROR: Device gm0: rebuilding provider ad4.
GEOM_MIRROR: Upgrading metadata on ad6 (v3->v4).
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/mirror/gm0s1a
GEOM_ELI: Device mirror/gm0s1b.eli created.
GEOM_ELI: Encryption: Blowfish-CBC 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device mirror/gm0s1f.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device mirror/gm0s1g.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI: Crypto: software
bge1: link state changed to DOWN
bge1: link state changed to UP
[-- Attachment #3 --]
# metacolo custom kernel configuration
include GENERIC
ident METACOLO
options MROUTING
options IPFILTER
#options IPV6FIREWALL
#options TCP_DROP_SYNFIN
options DUMMYNET
#options IPSEC
#options IPSEC_ESP
#options IPSEC_DEBUG
device vlan
options GEOM_BDE
options GEOM_MIRROR
options GEOM_LABEL
#options GEOM_GPT
options GEOM_PART_GPT
options QUOTA
options IPFIREWALL
options IPFIREWALL_DEFAULT_TO_ACCEPT
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_PRIQ
options ALTQ_NOPCC
options GEOM_ELI
device pf
device pflog
device crypto
options COMPAT_FREEBSD6
options SCTP
options AUDIT
options DEVICE_POLLING
options HZ=1000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5bfab4bc0804211223w34d41326g7350c51da35a1721>