Date: Mon, 24 Jan 2000 22:19:57 +0100 From: Jeroen Ruigrok/Asmodai <asmodai@wxs.nl> To: "Justin T. Gibbs" <gibbs@narnia.plutotech.com> Cc: scsi@FreeBSD.org Subject: Re: Need some real good advice to track this problem down Message-ID: <20000124221957.A290@daemon.ninth-circle.org> In-Reply-To: <200001242010.NAA22362@narnia.plutotech.com>; from gibbs@narnia.plutotech.com on Mon, Jan 24, 2000 at 01:10:22PM -0700 References: <20000124160434.D691@daemon.ninth-circle.org> <200001242010.NAA22362@narnia.plutotech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
-On [20000124 21:28], Justin T. Gibbs (gibbs@narnia.plutotech.com) wrote: >In article <20000124160434.D691@daemon.ninth-circle.org> you wrote: >> >> disk4 = >> da3 at ahc0 bus 0 target 4 lun 0 >> da3: <SEAGATE ST32171W 0484> Fixed Direct Access SCSI-2 device >> da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing >> Enabled >> da3: 2047MB (4194057 512 byte sectors: 255H 63S/T 261C) >> This drive has Term Enable, Term From Drive and Term To Bus set. > >You should not set "TP to bus". The controller is providing termination >power and only once source is required. Fixed the jumpers on da2, see below. >> Jan 24 15:08:13 daemon /kernel: SEQADDR == 0x112 >> Jan 24 15:08:24 daemon /kernel: Unexpected busfree in Data-in phase >> Jan 24 15:08:25 daemon /kernel: SEQADDR == 0x113 >> Jan 24 15:08:25 daemon /kernel: (da3:ahc0:0:4:0): Invalidating pack >> Jan 24 15:08:25 daemon /kernel: (da3:ahc0:0:4:0): Synchronize cache >> failed, status == 0x4a, scsi status == 0x0 > >It looks like da3 may be the culprit. Even with a degraded bus, >it is rare that a device will fail a selection. Are you sure >that this device is running cool enough? Well, the airflow is good, seems that the drives don't get cooled enough in their current position. I removed da3 from the chain, and moved da2 to the outer position and set it to term and term from drive. Now lets see how this behaves. I will be looking at something to cool the drives better. Any suggestions are of course welcome to improve this. I cannot at the moment place any HD at the end of the other chain since those are 3.5" drives and the mount area is 5.25", so I need to get some mount brackets before I can attempt this. Another mistake on my part, it is empty stub---cdrom----terminator, not what I said earlier: cdrom----empty stub----terminator. Thanks, -- Jeroen Ruigrok vd W/Asmodai asmodai@[wxs.nl|bart.nl|freebsd.org] Documentation nutter/B-rated Coder BSD: Technical excellence at its best The BSD Programmer's Documentation Project <http://home.wxs.nl/~asmodai>; How the gods kill... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000124221957.A290>