Date: Wed, 24 Dec 2014 12:05:40 +0200 From: Godfrey Hamshire <freebsdlist@compudoc.za.org> To: freebsd-questions@freebsd.org Subject: Anyone had experince setting up gnokii Message-ID: <549A8FF4.3080303@compudoc.za.org>
next in thread | raw e-mail | index | archive | help
Hello I have got a Nokia N79 and am trying to set it up to send sms's I am not wanting any thing fancy just to send me sms's in addition to the other notification methods I already employ for power outages loss of connectivity etc etc. I have managed to get this far and am stuck Initializing AT capable mobile phone ... Serial device: opening device /dev/ugen4.2 Gnokii serial_open: tcgetattr: Inappropriate ioctl for device Couldn't open ATBUS device: Inappropriate ioctl for device No matter what I try I am unable to proceed beyond this point Google is not much help here I was wondering what suggestions you guys might have. Regards Godfrey root@32.165 ~ # usbconfig ; gnokii --identify ugen0.1: <UHCI root HUB VIA> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen4.1: <EHCI root HUB VIA> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen3.1: <UHCI root HUB VIA> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen2.1: <UHCI root HUB VIA> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen1.1: <UHCI root HUB VIA> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen4.2: <N79 Nokia> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA) GNOKII Version 0.6.31 LOG: debug mask is 0x1 Config read from file /usr/local/etc/gnokiirc. phone instance config: model = AT port = /dev/ugen4.2 connection = serial initlength = default serial_baudrate = 115200 serial_write_usleep = 5000 handshake = hardware require_dcd = 0 smsc_timeout = 60 rfcomm_channel = 0 sm_retry = 0 Initializing AT capable mobile phone ... Serial device: opening device /dev/ugen4.2 Gnokii serial_open: tcgetattr: Inappropriate ioctl for device Couldn't open ATBUS device: Inappropriate ioctl for device AT bus initialization failed (1) Initialization failed (1) Serial device: closing device Telephone interface init failed: Command failed. Quitting. Command failed.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?549A8FF4.3080303>