Date: Fri, 26 Nov 2004 21:34:31 -0800 (PST) From: John <youzkz@yahoo.com> To: freebsd-questions@freebsd.org Subject: AGP support in FreeBSD 5.2.1 (AMD64) Message-ID: <20041127053431.82283.qmail@web50804.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi
I am using FBSD 521 for AMD64 on a AMD Athlon 64
system. I have an ATI Radeon 9250 AGP card, but when I
do a dmesg, I didn't see that the Ati card is being
recognised.
In addition, I can't find /dev/agpgart the AGP device
node.
I tried editing /boot/loader.conf to includes
agp_load="YES" but upon rebootinh, I can't see that
the AGP kernel module is being loaded. I also can't
find the AGP kernel modules file (agp something .ko)
under /boot/kernel, it seems it is not installed for
AMD 64 version of FBSD 521.
SO I recompile my kernel to include "device agp", but
still I can't see that the card was being recognised
when I did a dmesg.
Can anyone help or offer some sugestion?
john
================================================
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 5.2.1-RELEASE #2: Mon Nov 22 15:37:37 SGT 2004
root@:/usr/src/sys/amd64/compile/RELAX
Preloaded elf kernel "/boot/kernel/kernel" at
0xffffffff806c5000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 2800+ (1808.26-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0xfc0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,MMX+,LM,3DNow!+,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 501805056 (478 MB)
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xec003000-0xec003fff irq 3 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem
0xec004000-0xec004fff irq 3 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver
attached)
pci0: <bridge, PCI-unknown> at device 5.0 (no driver
attached)
pci0: <multimedia, audio> at device 6.0 (no driver
attached)
atapci0: <GENERIC ATA controller> port 0xf000-0xf00f
at device 8.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port
0xdb00-0xdb7f,0xda00-0xda0f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7
irq 11 at device 9.0 on pci0
atapci1: [MPSAFE]
ata2: at 0x9e0 on atapci1
ata2: [MPSAFE]
ata3: at 0x960 on atapci1
ata3: [MPSAFE]
atapci2: <GENERIC ATA controller> port
0xe100-0xe17f,0xe000-0xe00f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7
irq 10 at device 10.0 on pci0
atapci2: [MPSAFE]
ata4: at 0x9f0 on atapci2
ata4: [MPSAFE]
ata5: at 0x970 on atapci2
ata5: [MPSAFE]
pcib1: <PCI-PCI bridge> at device 11.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver
attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <PCI-PCI bridge> at device 14.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905B-TX Fast Etherlink XL> port
0xc000-0xc07f mem 0xeb021000-0xeb02107f irq 3 at
device 8.0 on pci2
xl0: Ethernet address: 00:10:4b:0c:0e:94
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
fwohci0: <VIA VT6306> port 0xc100-0xc17f mem
0xeb020000-0xeb0207ff irq 5 at device 12.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:10:dc:00:00:67:11:a0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:67:11:a0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
orm0: <Option ROMs> at iomem
0xd4000-0xd57ff,0xd0000-0xd3fff,0xc0000-0xccfff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or
clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1808256677 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = pass all,
Logging = enabled
GEOM: create disk ad0 dp=0xffffff0000be42a0
ad0: 2014MB <ST32122A> [4092/16/63] at ata0-master
UDMA33
GEOM: create disk ad1 dp=0xffffff001e401ea0
ad1: 2446MB <ST52520A> [4970/16/63] at ata0-slave
WDMA2
acd0: CDROM <SONY CDU4811> at ata1-master PIO4
GEOM: create disk ad4 dp=0xffffff001dfeb4a0
ad4: 76319MB <ST380013AS> [155061/16/63] at
ata2-master UDMA33
Mounting root from ufs:/dev/ad4s2a
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev
1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 2 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev
1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
IP Filter: v3.4.31 unloaded
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041127053431.82283.qmail>