Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Nov 1999 19:26:29 -0800 (PST)
From:      Don Lewis <Don.Lewis@tsc.tdk.com>
To:        FreeBSD-gnats-submit@freebsd.org
Subject:   kern/15198: CD changer autodetection doesn't work, causing SCSI timeout [PATCH]
Message-ID:  <199912010326.TAA00751@imap.gv.tsc.tdk.com>

next in thread | raw e-mail | index | archive | help

>Number:         15198
>Category:       kern
>Synopsis:       CD changer autodetection doesn't work, causing SCSI timeout [PATCH]
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Nov 30 19:30:01 PST 1999
>Closed-Date:
>Last-Modified:
>Originator:     Don Lewis <truckman@FreeBSD.org>
>Release:        FreeBSD 3.3-STABLE i386
>Organization:
TDK Semiconductor
>Environment:

FreeBSD 3.3-STABLE of the 19991129 vintage with a PIONEER CD-ROM DRM-6324X
LUN-based CD-ROM changer connected via an aic SCSI controller.

>Description:

A SCSI bus timeout occurs when the driver attempts to access the
second slot in the CD changer (cd2).  If the cdX devices are listed
in /etc/fstab, the machine totally wedges.  If no attempt is made
to mount the cdX devices, the machine is otherwise usable.

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.3-STABLE #3: Sun Nov 28 08:45:20 PST 1999
    gdonl@gvpc85.gv.tsc.tdk.com:/usr/src/sys/compile/TSC_INTERNAL
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 265910120 Hz
CPU: Pentium II (265.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 62078976 (60624K bytes)
Preloaded elf kernel "kernel" at 0xc030a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030a09c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vga0: <Matrox MGA 2164W graphics accelerator> rev 0x00 int a irq 10 on pci0.11.0
xl0: <3Com 3c905-TX Fast Etherlink XL> rev 0x00 int a irq 9 on pci0.15.0
xl0: Ethernet address: 00:60:08:31:f9:87
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 10 on pci0.19.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
aic0 at 0x340-0x35f irq 11 on isa
aic0: aic6360, disconnection
vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 2 seconds for SCSI devices to settle
sa0 at aic0 bus 0 target 5 lun 0
sa0: <HP C1557A UL01> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
pass4 at aic0 bus 0 target 5 lun 1
pass4: <HP C1557A UL01> Removable Changer SCSI-2 device 
pass4: 5.000MB/s transfers (5.000MHz, offset 8)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371N 0484> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C)
changing root device to da0s1a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:462 1.14> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
da1 at ahc0 bus 0 target 1 lun 0
da1: <WDIGTL WDE2170-1807A3 1.80> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da1: 2047MB (4194057 512 byte sectors: 255H 63S/T 261C)
cd1 at aic0 bus 0 target 6 lun 0
cd1: <PIONEER CD-ROM DRM-6324X 1.03> Removable CD-ROM SCSI-2 device 
cd1: 5.000MB/s transfers (5.000MHz, offset 8)
cd1: cd present [12205 x 2048 byte records]
(cd2:aic0:0:6:1): ccb 0xc0871800 - timed out, phase 84
cd2 at aic0 bus 0 target 6 lun 1
cd2: <PIONEER CD-ROM DRM-6324X 1.03> Removable CD-ROM SCSI-2 device 
cd2: 5.000MB/s transfers (5.000MHz, offset 8)
cd2: cd present [36007 x 2048 byte records]
cd3 at aic0 bus 0 target 6 lun 2
cd3: <PIONEER CD-ROM DRM-6324X 1.03> Removable CD-ROM SCSI-2 device 
cd3: 5.000MB/s transfers (5.000MHz, offset 8)
cd3: cd present [211343 x 2048 byte records]
cd4 at aic0 bus 0 target 6 lun 3
cd4: <PIONEER CD-ROM DRM-6324X 1.03> Removable CD-ROM SCSI-2 device 
cd4: 5.000MB/s transfers (5.000MHz, offset 8)
cd4: Attempt to query device size failed: NOT READY, Medium not present
cd5 at aic0 bus 0 target 6 lun 4
cd5: <PIONEER CD-ROM DRM-6324X 1.03> Removable CD-ROM SCSI-2 device 
cd5: 5.000MB/s transfers (5.000MHz, offset 8)
cd5: Attempt to query device size failed: NOT READY, Medium not present
cd6 at aic0 bus 0 target 6 lun 5
cd6: <PIONEER CD-ROM DRM-6324X 1.03> Removable CD-ROM SCSI-2 device 
cd6: 5.000MB/s transfers (5.000MHz, offset 8)
cd6: Attempt to query device size failed: NOT READY, Medium not present
cd9660: RockRidge Extension

>How-To-Repeat:

	

>Fix:
	
Adding a quirk entry to the driver fixes the problem, even though the
comments say this shouldn't be necessary.

--- sys/cam/scsi/scsi_cd.c.orig	Sun Aug 29 09:21:45 1999
+++ sys/cam/scsi/scsi_cd.c	Tue Nov 30 06:40:16 1999
@@ -164,6 +164,10 @@
 		  "*"}, /* quirks */ CD_Q_CHANGER
 	},
 	{
+		{ T_CDROM, SIP_MEDIA_REMOVABLE, "PIONEER", "CD-ROM DRM-6324X",
+		  "*"}, /* quirks */ CD_Q_CHANGER
+	},
+	{
 		{ T_CDROM, SIP_MEDIA_REMOVABLE, "CHINON", "CD-ROM CDS-535","*"},
 		/* quirks */ CD_Q_BCD_TRACKS
 	}

>Release-Note:
>Audit-Trail:
>Unformatted:


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912010326.TAA00751>