Date: Thu, 14 Apr 2005 11:50:51 -0400 From: Bill Moran <wmoran@potentialtech.com> To: freebsd-mobile@freebsd.org Subject: WiFi card on Thinkpad G40 Message-ID: <20050414115051.1c900cd8.wmoran@potentialtech.com>
next in thread | raw e-mail | index | archive | help
I have an IBM Thinkpad G40, which runs FreeBSD wonderfully, except for one thing: The WiFi. I found this entry that claims the WiFi card works, but I'm not having the same experience: http://gerda.univie.ac.at/freebsd-laptops/index.pl?action=show_laptop_detail&laptop=343 (Actually, other things are different as well, ACPI works perfectly as far as I can tell) Anyway, I'm looking for any advice. Originally using 5.3-RELEASE, and now 5.3-p8. I switched back to a GENERIC kernel to see if that helped, but I see nothing in dmesg that would indicate that the WiFi is even detected. uname: FreeBSD laptop.potentialtech.com 5.3-RELEASE-p8 FreeBSD 5.3-RELEASE-p8 #2: Tue Apr 12 06:49:17 EDT 2005 root@laptop.potentialtech.com:/usr/obj/usr/src/sys/LAPTOP i386 dmesg: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p8 #2: Tue Apr 12 06:49:17 EDT 2005 root@laptop.potentialtech.com:/usr/obj/usr/src/sys/LAPTOP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2987.90-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 527368192 (502 MB) avail memory = 510582784 (486 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1T> on motherboard acpi_ec_ecdt_probe: can't get handle acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x66,0x62 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib1 bge0: <Broadcom BCM5901 Fast Ethernet, ASIC rev. 0x3001> mem 0xd0200000-0xd020ffff irq 11 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDXauto bge0: Ethernet address: 00:06:1b:c6:30:12 cbb0: <TI1410 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci2: <network, ethernet> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 orm0: <ISA Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xcc800-0xcdfff,0xc0000-0xcc7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2987895894 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 4 steps (100% to 25.0%), currently 100.0% ad0: 54354MB <IC25N060ATMR04-0/MO3OAD4A> [110434/16/63] at ata0-master UDMA100 acd0: CDRW <DW-224E/B.2A> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s2a -- Bill Moran Potential Technologies http://www.potentialtech.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050414115051.1c900cd8.wmoran>