Date: Fri, 11 Feb 2022 09:17:14 -0800 From: bob prohaska <fbsd@www.zefox.net> To: freebsd-arm@freebsd.org Cc: bob prohaska <fbsd@www.zefox.net> Subject: Loader pauses on Pi4 without input Message-ID: <20220211171714.GA33662@www.zefox.net>
next in thread | raw e-mail | index | archive | help
A Pi4 running -current updated yesterday boots fine from a USB hard disk, but for some reason pauses at the loader prompt despite not getting any input on the serial console. There is a monitor/keyboard connected, but the monitor is powered off and the keyboard is out of reach, so I didn't bump it. Is there a software switch somewhere that controls this behavior? Eventually I'll want the machine to come up hands-off, though for now there's no harm in typing the boot command. Here's a snippet of serial console output: Loading kernel... /boot/kernel/kernel text=0x2a8 text=0x84ad60 text=0x247fd4 data=0x1b92a8 data=0x0+0x40d000 syms=[0x8+0x1331a0+0x8+0x15a6c1] Loading configured modules... /boot/kernel/filemon.ko text=0x1867 text=0x2558 data=0x510+0x20 syms=[0x8+0xd08+0x8+0x7c9] /etc/hostid size=0x25 /boot/kernel/umodem.ko text=0x2100 text=0x13a0 data=0x6d8+0x10 syms=[0x8+0xf18+0x8+0xb5c] loading required module 'ucom' /boot/kernel/ucom.ko text=0x2590 text=0x2f00 data=0x8e0+0x858 syms=[0x8+0x1290+0x8+0xbd5] /boot/entropy size=0x1000 Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. OK boot Using DTB provided by EFI at 0x7ef0000. EFI framebuffer information: addr, size 0x3e22c000, 0x8ca000 dimensions 1920 x 1200 stride 1920 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 Thanks for reading, and any hints. bob prohaska
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20220211171714.GA33662>