Date: Fri, 24 Jul 2009 00:32:57 +0100 From: Anton Shterenlikht <mexas@bristol.ac.uk> To: "Hayer, Sukhjinder" <sukhjinder.hayer@hp.com> Cc: "ia64@freebsd.org" <ia64@freebsd.org> Subject: Re: FW: 8.0 BETA1 boot problem Message-ID: <20090723233257.GC55841@mech-cluster238.men.bris.ac.uk> In-Reply-To: <A11E4A1228B2004E90D83FEB372C90133F16CABA40@GVW0671EXC.americas.hpqcorp.net> References: <A11E4A1228B2004E90D83FEB372C90133F16CABA40@GVW0671EXC.americas.hpqcorp.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 15, 2009 at 05:49:34PM +0000, Hayer, Sukhjinder wrote: > Hi, > Iam trying to boot 8.0 BETA1 on the IA 64 integrity server platform and I see some Mpt0 not being able to initiliaze. Does any one have an idea as to what might be the problem. Below > Is the part of the boot output with "boot_verbose=2" being set. > > pci0: <unknown> at device 1.0 (no driver attached) > pci0: <simple comms> at device 1.1 (no driver attached) > pci0: child uart0 requested type 4 for rid 0x14, but the BAR says it isuart0: <Non-standard ns8250 class UART with FIFOs> mem 0x88033000-0x88033fff irq 16 at device 1.2 on pci0 > uart0: [FILTER] > uart0: fast interrupt > uart0: console (9600,n,8,1) > ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88032000 > ohci0: [MPSAFE] > ohci0: [ITHREAD] > usbus0: <NEC uPD 9210 USB controller> on ohci0 > ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0 > ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88031000 > ohci1: [MPSAFE] > ohci1: [ITHREAD] > usbus1: <NEC uPD 9210 USB controller> on ohci1 > ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2 on pci0 > ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0x88030000 > ehci0: [MPSAFE] > ehci0: [ITHREAD] > usbus2: EHCI version 1.0 > usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0 > vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0 > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci1: <ACPI PCI bus> on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x1000, dev=0x0054, revid=0x01 > domain=0, bus=1, slot=1, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0147, statreg=0x0230, cachelnsz=32 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns) > intpin=a, irq=0 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 1 message in map 0x14 > map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled > map[14]: type Memory, range 64, base 0xa0470000, size 14, enabled > map[1c]: type Memory, range 64, base 0xa0460000, size 16, enabled > pcib1: matched entry for 1.1.INTA > pcib1: slot 1 INTA hardwired to IRQ 27 > found-> vendor=0x14e4, dev=0x1648, revid=0x10 > domain=0, bus=1, slot=2, func=0 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=29 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xa0450000, size 16, enabled > pcib1: matched entry for 1.2.INTA > pcib1: slot 2 INTA hardwired to IRQ 29 > found-> vendor=0x14e4, dev=0x1648, revid=0x10 > domain=0, bus=1, slot=2, func=1 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=b, irq=30 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xa0440000, size 16, enabled > pcib1: matched entry for 1.2.INTB > pcib1: slot 2 INTB hardwired to IRQ 30 > mpt0: <LSILogic SAS/SATA Adapter> mem 0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1 > mpt0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x1100 > mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1100 > mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xa0470000 > mpt0: [MPSAFE] > mpt0: [ITHREAD] > mpt0: soft reset failed: device not running > mpt0: WARNING - Failed hard reset! Trying to initialize anyway. > mpt0: mpt_reset: failed hard reset (0:0) > mpt0: WARNING - Failed hard reset! Trying to initialize anyway. > mpt0: mpt_reset: failed hard reset (0:1) > mpt0: WARNING - Failed hard reset! Trying to initialize anyway. > mpt0: mpt_reset: failed hard reset (0:2) > mpt0: WARNING - Failed hard reset! Trying to initialize anyway. > mpt0: mpt_reset: failed hard reset (0:3) > mpt0: WARNING - Failed hard reset! Trying to initialize anyway. > mpt0: mpt_reset: failed hard reset (0:4) > mpt0: soft reset failed: device not running > mpt0: WARNING - Failed hard reset! Trying to initialize anyway. mpt is a SCSI driver. Have you updated your firmware? Mine is SYSREV Current firmware revisions MP FW : E.03.32 BMC FW : 01.53 EFI FW : 01.22 System FW : 02.31 -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090723233257.GC55841>