Date: Tue, 7 May 1996 11:48:32 +0200 (MET DST) From: Philippe Regnauld <regnauld@tetard.hsc.fr> To: hackers@freebsd.org (hackers) Subject: Tadpole Pentium 1000 -- bogus hardware Message-ID: <199605070948.LAA03288@tetard.hsc.fr>
next in thread | raw e-mail | index | archive | help
Hi all,
For the past few weeks I've been fighting to get this Tadpole
laptop to boot FreeBSD, with growing success -- thanks to
Stefan. In the first place it didn't recognize PCI at all,
and thanks to some patches, it probes everything... and hangs
on npx0. Here's the last probe report I sent to Stefan:
Booting fd(0,a)/kernel @ 0x1a6000
text=0xf0000 data=0x0 bss=0xa00 symbols=[+0x600+0x4+0x27c+0x4+0x1fd]
total=0x297481 entry point=0x1a6000
Uncompressing kernel...done
Booting the kernel
BIOS basemem (635K) != RTC basemem (640K)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2-current #1: Wed May 1 21:09:39 1996
roberto@keltia.freenix.fr:/usr/src/sys/compile/BOOTMFS
CPU: 83-MHz Pentium 735\90 or 815\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 33554432 (32768K bytes)
avail memory = 30081024 (29376K bytes)
pcibus_setup(1): mode1res=0x8000000e (0x80000000), mode2res=0x0e (0x0e)
pcibus_setup(2): mode1res=0x00000000 (0x80000000)
pcibus_setup(3): mode1res=0x80000000 (0xff000001)
pcibus_check: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
pcibus_setup(4): now trying mechanism 2
pcibus_check: device 0 is there (id=04a38086)
Probing for devices on the PCI bus:
configuration mode 2 allows 16 devices.
chip0 <Intel 82434NX (Neptune) PCI cache memory controller> rev 17 on pci0:0
CPU: Pentium, 66MHz, CPU->Memory posting ON, read around write
Warning: Cache parity disabled!
Cache: 256KB writeback, cache clocks=3-2-2-2/4-2-2-2
Cache flags: byte-control
DRAM: page mode memory clocks=X-4-4-4/X-3-3-3 (60ns)
CPU->PCI: posting OFF, burst mode OFF, PCI clocks=2-1-1-1
PCI->Memory: posting OFF
Refresh: RAS#Only
ncr0 <ncr 53c810 scsi> rev 1 int a irq 10 on pci0:1
mapreg[10] type=1 addr=0000fc00 size=0100.
mapreg[14] type=0 addr=fedffc00 size=0100.
reg20: virtual=0xf46f8c00 physical=0xfedffc00 size=0x100
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl23 95/09/07)
ncr0 waiting for scsi devices to settle
(ncr0:3:0): "IBM DPRS-21215 ! S61B" type 0 fixed SCSI 2
sd0(ncr0:3:0): Direct-Access
sd0(ncr0:3:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1160MB (2376864 512 byte sectors)
sd0(ncr0:3:0): with 2358 cyls, 16 heads, and an average 63 sectors/track
chip1 <Intel 82378ZB PCI-ISA bridge> rev 3 on pci0:2
Bus Modes: Bus Park, Bus Lock,
Coprocessor errors enabled
Mouse function enabled
Keyboard controller: 60h,62h,64h,66h
RTC: 70h-77h
Configuration RAM: 0C00h,0800h-08FFh
Port 92: enabled
pci0:3: Cirrus Logic, device=0x1100, class=bridge (pcmcia) [no driver assigned]
map(10): io(3e0)
pci0: uses 256 bytes of memory from fedffc00 upto fedffcff.
pci0: uses 256 bytes of I/O space from fc00 upto fcff.
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 not found at 0x2f8
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x278-0x27f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
mse0: wrong signature 0
mse0 not found at 0x23c
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wt0 not found at 0x300
mcd0 not found at 0x300
mcd1 not found at 0x340
matcdc0 not found at 0x230
scd0 not found at 0x230
ep0 not found at 0x300
ze: pcmcia slot 0: 3Com Corporation~3C589~TP/BNC LAN Card Ver. 2a~000002~
ze: pcmcia slot 1:
ze0 not found at 0x300
zp: found card in slot 0
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
=====
After this, nothing. Zero. It still takes keyboard input (i.e. if I
hit CTRL-ALT-DEL, it'll display "Rebooting..." and do so.)
--
--------------------+---------------------------------------+-----------------+
| Philippe Regnauld |_______Herve Schauer Consultants_______| regnauld@hsc.fr |
+-------------------+FreeBSD - Turning PCs into Workstations+-----------------+
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199605070948.LAA03288>