Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 05 Mar 1997 15:15:29 -0500
From:      Dave Alderman <dave@persprog.com>
To:        Dmitry Morozovsky <marck@gw.rinet.ru>, hardware@freebsd.org
Subject:   Re: NCR 510 troubles
Message-ID:  <331DD461.5279@persprog.com>
References:  <199703051649.TAA29903@gw.rinet.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Dmitry Morozovsky wrote:
> FreeBSD 2.1.5-RELEASE #0: Mon Feb 17 22:56:23 MSK 1997
>     marck@gw2.rinet.ru:/usr/src/sys/compile/newsx
> CPU: 133-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
>   Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
>   Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> real memory  = 33554432 (32768K bytes)
> avail memory = 30789632 (30068K bytes)
> Probing for devices on PCI bus 0:
> chip0 <Intel 82439> rev 1 on pci0:0
> chip1 <Intel 82371 PCI-ISA bridge> rev 1 on pci0:7:0
> chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1
> ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:9
> ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
> ahc0 waiting for scsi devices to settle
> (ahc0:0:0): "CONNER CFP1060S 1.05GB 2135" type 0 fixed SCSI 2
> sd0(ahc0:0:0): Direct-Access 1013MB (2074880 512 byte sectors)
> (ahc0:1:0): "CONNER CFP2105S  2.14GB 2B4B" type 0 fixed SCSI 2
> sd1(ahc0:1:0): Direct-Access 2048MB (4194304 512 byte sectors)
> (ahc0:2:0): "Quantum XP34300 81HB" type 0 fixed SCSI 2
> sd2(ahc0:2:0): Direct-Access 4101MB (8399520 512 byte sectors)
> ncr0 <ncr 53c810 scsi> rev 18 int a irq 15 on pci0:11
> ncr0 waiting for scsi devices to settle
> (ncr0:0:0): "CONNER CFP1060S 1.05GB 245F" type 0 fixed SCSI 2
> sd3(ncr0:0:0): Direct-Access
> sd3(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
> 1010MB (2070400 512 byte sectors)
> (ncr0:1:0): "CONNER CFP1060S 1.05GB 2035" type 0 fixed SCSI 2
> sd4(ncr0:1:0): Direct-Access
> sd4(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
> 1013MB (2074880 512 byte sectors)
> (ncr0:4:0): "QUANTUM EMPIRE_1080S 1101" type 0 fixed SCSI 2
> sd5(ncr0:4:0): Direct-Access
> sd5(ncr0:4:0): FAST SCSI-2 125ns (8 Mb/sec) offset 8.
> 1029MB (2109376 512 byte sectors)
> Probing for devices on the ISA bus:
> scprobe: keyboard won't accept RESET command
> sc0 at 0x60-0x6f irq 1 on motherboard
> sc0: VGA color <16 virtual consoles, flags=0x0>
> ed0 at 0x280-0x29f irq 5 on isa
> ed0: address 00:80:48:a9:42:ee, type NE2000 (16 bit)
> sio0 at 0x3f8-0x3ff irq 4 on isa
> sio0: type 16550A
> sio1 at 0x2f8-0x2ff irq 3 on isa
> sio1: type 16550A
> fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> fdc0: NEC 72065B
> fd0: 1.44MB 3.5in
> npx0 on motherboard
> npx0: INT 16 interface
> ccd0-3: Concatenated disk drivers
> 

What is a 510?  The lowest number NCR/Symbios Logic chip I've dealt with
is the 53C810.   Is this an old ISA based card?  If so, it's probably
not 
very good for hard disks.


-----------------------------------------
The only constant in computers is change.
David W. Alderman	dave@persprog.com
-----------------------------------------



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?331DD461.5279>