Date: Tue, 18 Oct 2005 11:17:51 -0400 From: John Baldwin <jhb@freebsd.org> To: freebsd-drivers@freebsd.org Subject: Re: Some Questions Message-ID: <200510181117.52583.jhb@freebsd.org> In-Reply-To: <200510180826.j9I8Quw26871@cal1-1.us4.outblaze.com> References: <200510180826.j9I8Quw26871@cal1-1.us4.outblaze.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 18 October 2005 04:26 am, Yong Ma wrote:
> Hi everybody:
>
>
> I'm new here,nice to meet you all! I'm also aFreeBSD_device_driver newbie,
> and now I'm enaged in writting a driverfor a cryptographic accelerator
> card.As a preparation I read thesections of device driver in "FreeBSD
> Architecture Handbook",andexercised the example driver in the book.now I
> have several questions(maybeeasy for you but most useful for me):
>
> 1)Some drivers declares the device_open() as int device_open(dev_t
> dev,...),and some declare it as int device_open(struct cdev
> *dev,...),sometimes the first one couldn't be compliedsuccessfully,what's
> the difference?
On 6.0 and later you should use 'struct cdev *dev' and on 5.x and earlier
'dev_t dev'.
> 2) if (pci_get_vendor(dev) == 0x11c1) { ...
> ~~~~~~~~how to get this number if I don't
> know it?
This number is part of the chip ID in pciconf -l output. For example, on my
laptop:
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04
hdr=0x01
For this device, pci_get_devid(dev) would return 0x1a318086.
pci_get_vendor(dev) would return the 0x8086 part of that.
> 3)Could the device on PCI slot be listed by /pciconf -l /without driver.
You mean cutting out the pcib1 part from the line above? You could always use
something like awk, sed, or cut. For example:
% pciconf -l | cut -d @ -f 2
pci0:0:0: class=0x060000 card=0x56001558 chip=0x1a308086 rev=0x04
hdr=0x00
pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04
hdr=0x01
pci0:29:0: class=0x0c0300 card=0x56001558 chip=0x24828086 rev=0x02
hdr=0x00
...
> 4)The printf() seems not work under XWindow mode in functions like
> deviec_prob or device_attach,how to make it work?
Run 'dmesg' in your Xterminal to see the messages. Alternatively, you can use
the 'xconsole' program which should show the messages in its window.
> 5)If only the pseudo-device in /dev can be destroyed with
> destroy_dev(sc->dev0) in detach() function in a KLD driver? I can't do
> that!
I'm not sure what you are asking here. You can't leave an entry in /dev
around when your module is unloaded via kldunload since you would be removing
the devsw and devsw functions that back that device resulting in a kernel
panic the next time some process tried to use the /dev entry. What exact
problem are you trying to solve?
--
John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200510181117.52583.jhb>