From owner-freebsd-mobile@FreeBSD.ORG Fri Jan 9 16:35:52 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0E06B16A4CE for ; Fri, 9 Jan 2004 16:35:52 -0800 (PST) Received: from sakura.ninth-nine.com (sakura.ninth-nine.com [219.127.74.120]) by mx1.FreeBSD.org (Postfix) with ESMTP id 784C243D54 for ; Fri, 9 Jan 2004 16:35:48 -0800 (PST) (envelope-from nork@FreeBSD.org) Received: from pelsia.ninth-nine.com (pelsia.ninth-nine.com [219.127.74.123]) (authenticated bits=0) by sakura.ninth-nine.com (8.12.10/8.12.10/NinthNine) with ESMTP id i0A0ZQqg002360 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 10 Jan 2004 09:35:28 +0900 (JST) (envelope-from nork@FreeBSD.org) Date: Sat, 10 Jan 2004 09:35:26 +0900 From: Norikatsu Shigemura To: "M. Warner Losh" Message-Id: <20040110093526.13ec4aa5.nork@FreeBSD.org> In-Reply-To: <20040107.171023.63338658.imp@bsdimp.com> References: <20040107.171023.63338658.imp@bsdimp.com> X-Mailer: Sylpheed version 0.9.8a (GTK+ 1.2.10; i386-portbld-freebsd5.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: mobile@FreeBSD.org Subject: Re: More power patches X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 10 Jan 2004 00:35:52 -0000 On Wed, 07 Jan 2004 17:10:23 -0700 (MST) "M. Warner Losh" wrote: > I've updated the power patches. This includes the > transparent/secondary bridge support and tweaks to the last version. I tested on SHARP Mebius MURAMASA PC-MT2-F1(PentiumIII with i830MG). But not work like 20040101 version. 1. fwochi/ehci can't read VERSION INFO, so don't attach. 2. cardbus is not available (cardbus bridge looks good). if Compact Flash card is/isnot available, it don't probe. 3. suspend is OK. but resume is NG. SEE ALSO: my dmesg (problem marked '* * * * * ...') - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #65: Fri Jan 9 06:06:02 JST 2004 nork@pelsia.ninth-nine.com:/usr/obj/usr/src/sys/PELSIA Preloaded elf kernel "/boot/kernel/kernel" at 0xc08be000. Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc08be2f0. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc08be3a0. Preloaded elf module "/boot/kernel/md.ko" at 0xc08be44c. Preloaded elf module "/boot/kernel/if_rl.ko" at 0xc08be4f4. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08be5a0. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08be64c. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08be6f8. Preloaded elf module "/boot/kernel/rc4.ko" at 0xc08be7a4. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08be84c. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08be8f8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08be9a4. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08bea50. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08beaf8. Preloaded elf module "/boot/kernel/umass.ko" at 0xc08beba4. Preloaded elf module "/boot/kernel/cam.ko" at 0xc08bec50. Preloaded elf module "/boot/kernel/agp.ko" at 0xc08becf8. Preloaded elf module "/boot/kernel/accf_data.ko" at 0xc08beda0. Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc08bee50. Preloaded elf module "/boot/kernel/random.ko" at 0xc08bef00. Preloaded elf module "/boot/kernel/if_fwe.ko" at 0xc08befac. Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08bf058. Preloaded elf module "/boot/kernel/snd_uaudio.ko" at 0xc08bf108. Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc08bf1b8. Preloaded elf module "/boot/kernel/exca.ko" at 0xc08bf264. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08bf310. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc08bf3b8. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc08bf464. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc08bf510. Preloaded elf module "/boot/kernel/aio.ko" at 0xc08bf5bc. Preloaded elf module "/boot/kernel/sbp.ko" at 0xc08bf664. Preloaded elf module "/boot/kernel/sbp_targ.ko" at 0xc08bf70c. Preloaded elf module "/boot/kernel/dcons_crom.ko" at 0xc08bf7bc. Preloaded elf module "/boot/kernel/uart.ko" at 0xc08bf86c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08bf918. Calibrating clock(s) ... i8254 clock: 1193159 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 996683179 Hz CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz (996.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4 Features=0x383f9ff real memory = 527958016 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000001ede5fff, 505151488 bytes (123328 pages) 0x000000001f700000 - 0x000000001f777fff, 491520 bytes (120 pages) avail memory = 506757120 (483 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6590 bios32: Entry = 0xfd870 (c00fd870) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd870+0x13a pnpbios: Found PnP BIOS data at 0xc00f65c0 pnpbios: Entry = f0000:7d19 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: mem: Pentium Pro MTRR support enabled null: VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 00 01 7d 00 00 01 2b 01 00 01 3d 01 00 01 59 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 13 mode(s) found VESA: v3.0, 8000k memory, flags:0x1, mode table:0xc06d2d20 (1000040) VESA: Almador Graphics Chip Accelerated VGA BIOS VESA: Intel Corporation Almador Graphics Controller Hardware Version 0.0 module_register_init: MOD_LOAD (splash_bmp, 0xc06ca8d0, 0) error 2 npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 embedded 2 0 A 0x62 3 4 5 7 9 10 11 embedded 2 0 B 0x63 3 4 5 7 9 10 11 embedded 2 0 C 0x69 3 4 5 7 9 10 11 embedded 2 1 A 0x68 3 4 5 7 9 10 11 slot 1 2 3 A 0x60 3 4 5 7 9 10 11 slot 1 2 3 B 0x6b 3 4 5 7 9 10 11 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 embedded 2 4 A 0x60 3 4 5 6 7 9 10 11 12 embedded 2 4 B 0x63 3 4 5 6 7 9 10 11 12 embedded 2 4 C 0x6a 3 4 5 6 7 9 10 11 12 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 1 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 2, max = 10, width = 8 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 9, width = 7 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_cmbat0: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.2.0 \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.29.0 \\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 0.29.1 \\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.29.2 \\_SB_.PCI0.LPCB.LNKH irq 0: [ 3] low,level,sharable 0.29.3 \\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.31.0 \\_SB_.PCI0.LPCB.LNKB irq 9: [ 9] low,level,sharable 0.31.1 ---- before setting priority for links ------------ \\_SB_.PCI0.LPCB.LNKH: interrupts: 3 penalty: 1110 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.LPCB.LNKH: interrupts: 3 penalty: 1110 references: 1 priority: 1110 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.2.0 \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.29.0 \\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 0.29.1 \\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.29.2 \\_SB_.PCI0.LPCB.LNKH irq 3: [ 3] low,level,sharable 0.29.3 \\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.31.0 \\_SB_.PCI0.LPCB.LNKB irq 9: [ 9] low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=0 pci0:0:0: setting power state D0 found-> vendor=0x8086, dev=0x3575, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:2:0: setting power state D0 map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 1, range 32, base e0000000, size 19, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.LPCB.LNKA) pcib0: slot 2 INTA is routed to irq 5 found-> vendor=0x8086, dev=0x3577, revid=0x04 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 1 supports D0 D1 D3 current D0 pci0:2:1: setting power state D0 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 1, range 32, base e0080000, size 19, enabled found-> vendor=0x8086, dev=0x3577, revid=0x00 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x05 (1250 ns) powerspec 1 supports D0 D1 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) pci0:31:0: setting power state D0 found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:31:1: setting power state D0 map[10]: type 4, range 32, base 00000000, size 3, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[20]: type 4, range 32, base 00001800, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pci0:31:3: setting power state D0 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB) pcib0: slot 31 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2483, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:5: setting power state D0 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 00001840, size 6, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB) pcib0: slot 31 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:6: setting power state D0 map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 4, range 32, base 00001880, size 7, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB) pcib0: slot 31 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 agp0: mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 5 at device 2.0 on pci0 agp0: Bus reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: Bus reserved 0x80000 bytes for rid 0x14 type 3 at 0xe0000000 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: at device 2.1 (no driver attached) pcib1: at device 30.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xe0200000-0xe02fffff pcib1: prefetched decode 0xe0500000-0xe05fffff pcib1: Subtractively decoded bridge. ---- initial configuration ------------------------ \\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 2.0.0 \\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.0.1 \\_SB_.PCI0.LPCB.LNKF irq 0: [ 10] low,level,sharable 2.0.2 \\_SB_.PCI0.LPCB.LNKE irq 3: [ 3] low,level,sharable 2.1.0 \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.3.0 \\_SB_.PCI0.LPCB.LNKH irq 3: [ 3] low,level,sharable 2.3.1 \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.4.0 \\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.4.1 \\_SB_.PCI0.LPCB.LNKG irq 5: [ 5] low,level,sharable 2.4.2 ---- before setting priority for links ------------ \\_SB_.PCI0.LPCB.LNKF: interrupts: 10 penalty: 710 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.LPCB.LNKF: interrupts: 10 penalty: 710 references: 1 priority: 710 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 2.0.0 \\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.0.1 \\_SB_.PCI0.LPCB.LNKF irq 10: [ 10] low,level,sharable 2.0.2 \\_SB_.PCI0.LPCB.LNKE irq 3: [ 3] low,level,sharable 2.1.0 \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.3.0 \\_SB_.PCI0.LPCB.LNKH irq 3: [ 3] low,level,sharable 2.3.1 \\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.4.0 \\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.4.1 \\_SB_.PCI0.LPCB.LNKG irq 5: [ 5] low,level,sharable 2.4.2 pci2: on pcib1 pci2: physical bus=2 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=0x1180, dev=0x0476, revid=0xaa bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=0x1180, dev=0x0476, revid=0xaa bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:0:2: setting power state D0 map[10]: type 1, range 32, base e0202000, size 11, enabled pcib1: device (null) requested decoded memory range 0xe0202000-0xe02027ff pcib1: matched entry for 2.0.INTC (source \\_SB_.PCI0.LPCB.LNKF) pcib1: slot 0 INTC is routed to irq 10 found-> vendor=0x1180, dev=0x0552, revid=0x02 bus=2, slot=0, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 pci2:1:0: setting power state D0 map[10]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[14]: type 1, range 32, base e0202800, size 8, enabled pcib1: device (null) requested decoded memory range 0xe0202800-0xe02028ff pcib1: matched entry for 2.1.INTA (source \\_SB_.PCI0.LPCB.LNKE) pcib1: slot 1 INTA is routed to irq 3 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:3:0: setting power state D0 map[10]: type 3, range 32, base e0500000, size 12, enabled pcib1: device (null) requested decoded memory range 0xe0500000-0xe0500fff pcib1: matched entry for 2.3.INTA (source \\_SB_.PCI0.LPCB.LNKA) pcib1: slot 3 INTA is routed to irq 5 found-> vendor=0x1260, dev=0x3873, revid=0x01 bus=2, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:4:0: setting power state D0 map[10]: type 1, range 32, base e0200000, size 12, enabled pcib1: device (null) requested decoded memory range 0xe0200000-0xe0200fff pcib1: matched entry for 2.4.INTA (source \\_SB_.PCI0.LPCB.LNKA) pcib1: slot 4 INTA is routed to irq 5 found-> vendor=0x1033, dev=0x0035, revid=0x43 bus=2, slot=4, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:4:1: setting power state D0 map[10]: type 1, range 32, base e0201000, size 12, enabled pcib1: device (null) requested decoded memory range 0xe0201000-0xe0201fff pcib1: matched entry for 2.4.INTB (source \\_SB_.PCI0.LPCB.LNKD) pcib1: slot 4 INTB is routed to irq 10 found-> vendor=0x1033, dev=0x0035, revid=0x43 bus=2, slot=4, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:4:2: setting power state D0 map[10]: type 1, range 32, base e0202c00, size 8, enabled pcib1: device (null) requested decoded memory range 0xe0202c00-0xe0202cff pcib1: matched entry for 2.4.INTC (source \\_SB_.PCI0.LPCB.LNKG) pcib1: slot 4 INTC is routed to irq 5 found-> vendor=0x1033, dev=0x00e0, revid=0x04 bus=2, slot=4, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x84 (3960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) intpin=c, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: at device 0.0 on pci2 pcib1: device cbb0 requested decoded memory range 0xe0200000-0xe02fffff cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xe0202d00 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 2.0.INTA (source \\_SB_.PCI0.LPCB.LNKC) pcib1: slot 0 INTA is routed to irq 10 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700aa 0x00824000 0x10: 0xe0202000 0x020000dc 0x20020100 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0400010a 0x40: 0x102913bd 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x102913bd 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: at device 0.1 on pci2 pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xe0203d00 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib1: matched entry for 2.0.INTB (source \\_SB_.PCI0.LPCB.LNKD) pcib1: slot 0 INTB is routed to irq 10 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700aa 0x00824000 0x10: 0xe0203000 0x020000dc 0x20040300 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0400020a 0x40: 0x102913bd 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x102913bd 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: mem 0xe0202000-0xe02027ff irq 10 at device 0.2 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 0 -> 8. fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xe0202000 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * fwohci0: OHCI version 0.0 (ROM=0) fwohci0: invalid OHCI version fwohci0: FireWire init failed with err=6 device_probe_and_attach: fwohci0 attach returned 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * rl0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0x3000 rl0: port 0x3000-0x30ff mem 0xe0202800-0xe02028ff irq 3 at device 1.0 on pci2 pcib1: device rl0 requested decoded I/O range 0x3000-0x30ff rl0: Ethernet address: 08:00:1f:b1:3b:fb miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached wi0: mem 0xe0500000-0xe0500fff irq 5 at device 3.0 on pci2 wi0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0500000 wi0: 802.11 address: 00:d0:59:44:a7:4d wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.3) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached ohci0: mem 0xe0200000-0xe0200fff irq 5 at device 4.0 on pci2 ohci0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0200000 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered ohci1: mem 0xe0201000-0xe0201fff irq 10 at device 4.1 on pci2 ohci1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0201000 usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 1 port with 1 removable, self powered ehci0: mem 0xe0202c00-0xe0202cff irq 5 at device 4.2 on pci2 ehci0: Bus reserved 0x100 bytes for rid 0x10 type 3 at 0xe0202c00 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * usb2: EHCI version 0.0 usb2: wrong number of companions (0 != 2) ehci0: USB init failed err=13 device_probe_and_attach: ehci0 attach returned 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1800-0x180f at device 31.1 on pci0 atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0x1800 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ichsmb0: port 0x1820-0x183f irq 9 at device 31.3 on pci0 ichsmb0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 smbus0: on ichsmb0 smb0: on smbus0 pcm0: port 0x1840-0x187f,0x1c00-0x1cff irq 9 at device 31.5 on pci0 pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00 pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0x1840 pcm0: pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: sndbuf_setmap 210000, 4000; 0xe0216000 -> 210000 pcm0: sndbuf_setmap 220000, 4000; 0xe021a000 -> 220000 pci0: at device 31.6 (no driver attached) pci0:31:6: setting power state D3 unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: