Date: Sun, 12 Feb 2012 01:00:17 +0000 From: Sevan / Venture37 <venture37@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: wi driver Message-ID: <4F370F21.3030300@gmail.com> In-Reply-To: <CAJ-Vmok6RMthnC0ESKXU20LVvqczdN6wcTpGbSqNS7JEaODsWg@mail.gmail.com> References: <4F36DAB0.2020803@gmail.com> <4f36df71.2139440a.10ce.fffffb81@mx.google.com> <CAJ-Vmok6RMthnC0ESKXU20LVvqczdN6wcTpGbSqNS7JEaODsWg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/02/2012 00:43, Adrian Chadd wrote: > Is this FreeBSD-9.0 RELEASE? > > Which interface are you marking as up? wi0? or wlan0? wi0 > Can you please supply me with a complete dmesg? Sure, mac addresses have been snipped btw Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RELEASE #1: Sat Feb 11 15:10:22 GMT 2012 xxx:/usr/obj/usr/src/sys/THINKPAD amd64 CPU: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz (1596.04-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8155246592 (7777 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <LENOVO TP-7V > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110527/tbfadt-556) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110527/tbfadt-586) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <LENOVO TP-7V> on motherboard CPU0: local APIC error 0x40 acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM965 SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory acpi_video0: <ACPI video extension> on vgapci0 vgapci1: <VGA-compatible display> mem 0xf8100000-0xf81fffff at device 2.1 on pci0 em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1840-0x185f mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 00:1d:72: uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0 usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 hdac0: <Intel 82801H High Definition Audio Controller> mem 0xf8220000-0xf8223fff irq 17 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 pci3: <network> at device 0.0 (no driver attached) uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0 usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib3 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd7eff000-0xd7efffff irq 16 at device 0.0 on pci5 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xd7efe800-0xd7efefff irq 17 at device 0.1 on pci5 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:1d:72:ff: fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:1d:72: fwe0: Ethernet address: 02:1d:72: fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:1d:72:ff:9 @ 0xfffe00000000, S400, maxrec 2048 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x51c4000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode pci5: <base peripheral, SD host controller> at device 0.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ahci0: <Intel ICH8M AHCI SATA controller> port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_dock0: <ACPI Docking Station> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 hdac0: HDA Codec #0: Analog Devices AD1984 hdac0: HDA Codec #1: Conexant (Unknown) pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <OCZ-VERTEX2 1.35> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! GEOM: ada0s2: geometry does not match label (255h,63s != 16h,63s). GEOM: ada0s2: invalid disklabel. Root mount waiting for: cbb0 usbus5 usbus2 wi0: <Avaya Communication Avaya Wireless PC Card> at port 0x4000-0x403f irq 16 function 0 config 1 on pccard0 uhub2: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered Trying to mount root from ufs:/dev/ada0s3a [rw]... ugen0.2: <STMicroelectronics> at usbus0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F370F21.3030300>