From owner-freebsd-current@FreeBSD.ORG Tue Feb 27 03:11:58 2007 Return-Path: X-Original-To: current@FreeBSD.org Delivered-To: freebsd-current@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 3D68616A401 for ; Tue, 27 Feb 2007 03:11:58 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id 26F5013C4BA for ; Tue, 27 Feb 2007 03:11:57 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 14252 invoked from network); 27 Feb 2007 02:19:51 -0000 Received: from ppp-71-139-18-69.dsl.snfc21.pacbell.net (HELO ?10.0.5.55?) (nate-mail@71.139.18.69) by root.org with ESMTPA; 27 Feb 2007 02:19:51 -0000 Message-ID: <45E39552.2020607@root.org> Date: Mon, 26 Feb 2007 18:20:02 -0800 From: Nate Lawson User-Agent: Thunderbird 1.5.0.9 (X11/20070214) MIME-Version: 1.0 To: current@FreeBSD.org, stable@freebsd.org X-Enigmail-Version: 0.94.2.0 Content-Type: multipart/mixed; boundary="------------010006070701000204050700" Cc: Subject: PATCH: new acpi embedded controller I/O model X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 27 Feb 2007 03:11:58 -0000 This is a multi-part message in MIME format. --------------010006070701000204050700 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit If you are having EC timeout problems as in the below PR, please try the latest EC code. I just committed it in rev 1.69 of acpi_ec.c to -current. Attached is the patch for 6-stable. http://www.freebsd.org/cgi/query-pr.cgi?pr=98171 To use it, just recompile your acpi kernel module and load it at boot: cd /sys/modules/acpi/acpi && make && cp acpi.ko / Then at the loader prompt after rebooting: > load /acpi.ko > boot You should be able to see battery status and thermal settings via "sysctl hw.acpi" as normal. Check dmesg for any new errors. If you notice slower performance or get EC "timed out" messages on console, you try increasing these sysctls/tunables: debug.acpi.ec.timeout debug.acpi.ec.poll_time Or turn off this sysctl/tunable, disabling the new burst mode: debug.acpi.ec.burst=0 To find any performance problems, you'll need to rebuild the kernel and modules with this added to your kernel config: options KTR options KTR_ENTRIES=65536 Then reboot, load this kernel/acpi.ko, use the system for a while to trigger the problem behavior and generate output: ktrdump -t | gzip -c > ktr.out.gz This code is pretty well-tested so I expect the only issues we might see is it not totally fixing some systems that previously didn't work or needing to add some workaround code for systems that don't properly support burst mode. Thanks, Nate --------------010006070701000204050700 Content-Type: text/plain; name="ec.diff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="ec.diff" Index: acpi_ec.c =================================================================== RCS file: /home/ncvs/src/sys/dev/acpica/acpi_ec.c,v retrieving revision 1.65.2.2 diff -u -r1.65.2.2 acpi_ec.c --- acpi_ec.c 11 May 2006 17:41:00 -0000 1.65.2.2 +++ acpi_ec.c 27 Feb 2007 02:07:58 -0000 @@ -187,15 +187,15 @@ * | | | +--------- Burst Mode Enabled? * | | +----------- SCI Event? * | +------------- SMI Event? - * +--------------- + * +--------------- * */ typedef UINT8 EC_STATUS; #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01) #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02) +#define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08) #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10) -#define EC_FLAG_SCI ((EC_STATUS) 0x20) /* * EC_EVENT: @@ -207,6 +207,10 @@ #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01) #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02) #define EC_EVENT_SCI ((EC_EVENT) 0x20) +#define EC_EVENT_SMI ((EC_EVENT) 0x40) + +/* Data byte returned after burst enable indicating it was successful. */ +#define EC_BURST_ACK 0x90 /* * Register access primitives @@ -265,8 +269,11 @@ bus_space_tag_t ec_csr_tag; bus_space_handle_t ec_csr_handle; + struct mtx ec_mtx; int ec_glk; int ec_glkhandle; + int ec_burstactive; + int ec_sci_pend; }; /* @@ -276,11 +283,14 @@ */ #define EC_LOCK_TIMEOUT 1000 -/* Default interval in microseconds for the status polling loop. */ +/* Default delay in microseconds between each run of the status polling loop. */ #define EC_POLL_DELAY 10 -/* Total time in ms spent in the poll loop waiting for a response. */ -#define EC_POLL_TIMEOUT 100 +/* Default time in microseconds spent polling before sleep waiting. */ +#define EC_POLL_TIME 500 + +/* Total time in ms spent waiting for a response from EC. */ +#define EC_TIMEOUT 500 #define EVENT_READY(event, status) \ (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \ @@ -288,25 +298,47 @@ ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \ ((status) & EC_FLAG_INPUT_BUFFER) == 0)) -static int ec_poll_timeout = EC_POLL_TIMEOUT; -TUNABLE_INT("hw.acpi.ec.poll_timeout", &ec_poll_timeout); - ACPI_SERIAL_DECL(ec, "ACPI embedded controller"); +SYSCTL_DECL(_debug_acpi); +SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging"); + +static int ec_burst_mode = TRUE; +TUNABLE_INT("debug.acpi.ec.burst", &ec_burst_mode); +SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RW, &ec_burst_mode, TRUE, + "Enable use of burst mode (faster for nearly all systems)"); +static int ec_poll_time = EC_POLL_TIME; +TUNABLE_INT("debug.acpi.ec.poll_time", &ec_poll_time); +SYSCTL_INT(_debug_acpi_ec, OID_AUTO, poll_time, CTLFLAG_RW, &ec_poll_time, + EC_POLL_TIME, "Time spent polling vs. sleeping (CPU intensive)"); +static int ec_timeout = EC_TIMEOUT; +TUNABLE_INT("debug.acpi.ec.timeout", &ec_timeout); +SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RW, &ec_timeout, + EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)"); + static __inline ACPI_STATUS -EcLock(struct acpi_ec_softc *sc) +EcLock(struct acpi_ec_softc *sc, int serialize) { ACPI_STATUS status; - /* Always acquire the exclusive lock. */ + /* + * If caller is executing a series of commands, acquire the exclusive lock + * to serialize with other users. + * To sync with bottom-half interrupt handler, always acquire the mutex. + */ status = AE_OK; - ACPI_SERIAL_BEGIN(ec); + if (serialize) + ACPI_SERIAL_BEGIN(ec); + mtx_lock(&sc->ec_mtx); /* If _GLK is non-zero, also acquire the global lock. */ if (sc->ec_glk) { status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle); - if (ACPI_FAILURE(status)) - ACPI_SERIAL_END(ec); + if (ACPI_FAILURE(status)) { + mtx_unlock(&sc->ec_mtx); + if (serialize) + ACPI_SERIAL_END(ec); + } } return (status); @@ -317,7 +349,9 @@ { if (sc->ec_glk) AcpiReleaseGlobalLock(sc->ec_glkhandle); - ACPI_SERIAL_END(ec); + mtx_unlock(&sc->ec_mtx); + if (sx_xlocked(&ec_sxlock)) + ACPI_SERIAL_END(ec); } static uint32_t EcGpeHandler(void *Context); @@ -558,6 +592,7 @@ params = acpi_get_private(dev); sc->ec_dev = dev; sc->ec_handle = acpi_get_handle(dev); + mtx_init(&sc->ec_mtx, "ACPI EC lock", NULL, MTX_DEF); /* Retrieve previously probed values via device ivars. */ sc->ec_glk = params->glk; @@ -640,6 +675,7 @@ if (sc->ec_data_res) bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid, sc->ec_data_res); + mtx_destroy(&sc->ec_mtx); return (ENXIO); } @@ -687,13 +723,13 @@ struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; UINT8 Data; ACPI_STATUS Status; - EC_STATUS EcStatus; char qxx[5]; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL")); - Status = EcLock(sc); + /* Serialize user access with EcSpaceHandler(). */ + Status = EcLock(sc, TRUE); if (ACPI_FAILURE(Status)) { ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), "GpeQuery lock error: %s\n", AcpiFormatException(Status)); @@ -701,19 +737,6 @@ } /* - * If the EC_SCI bit of the status register is not set, then pass - * it along to any potential waiters as it may be an IBE/OBF event. - */ - EcStatus = EC_GET_CSR(sc); - if ((EcStatus & EC_EVENT_SCI) == 0) { - CTR1(KTR_ACPI, "ec event was not SCI, status %#x", EcStatus); - sc->ec_csrvalue = EcStatus; - wakeup(&sc->ec_csrvalue); - EcUnlock(sc); - goto re_enable; - } - - /* * Send a query command to the EC to find out which _Qxx call it * wants to make. This command clears the SCI bit and also the * interrupt source since we are edge-triggered. @@ -726,6 +749,9 @@ goto re_enable; } Data = EC_GET_DATA(sc); + sc->ec_sci_pend = FALSE; + + /* Drop locks before evaluating _Qxx method since it may trigger GPEs. */ EcUnlock(sc); /* Ignore the value for "no outstanding event". (13.3.5) */ @@ -734,7 +760,7 @@ goto re_enable; /* Evaluate _Qxx to respond to the controller. */ - sprintf(qxx, "_Q%02x", Data); + snprintf(qxx, sizeof(qxx), "_Q%02x", Data); AcpiUtStrupr(qxx); Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL); if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) { @@ -745,7 +771,7 @@ re_enable: /* Re-enable the GPE event so we'll get future requests. */ - Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_NOT_ISR); + Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_ISR); if (ACPI_FAILURE(Status)) printf("EcGpeQueryHandler: AcpiEnableEvent failed\n"); } @@ -760,27 +786,61 @@ { struct acpi_ec_softc *sc = Context; ACPI_STATUS Status; + EC_STATUS EcStatus; KASSERT(Context != NULL, ("EcGpeHandler called with NULL")); /* * Disable further GPEs while we handle this one. Since we are directly * called by ACPI-CA and it may have unknown locks held, we specify the - * ACPI_ISR flag to keep it from acquiring any more mutexes (which could - * potentially sleep.) + * ACPI_ISR flag to keep it from acquiring any more mutexes (although + * sleeping would be ok since we're in an ithread.) */ AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_ISR); - /* Schedule the GPE query handler. */ - Status = AcpiOsQueueForExecution(OSD_PRIORITY_GPE, EcGpeQueryHandler, - Context); + /* For interrupt (GPE) handler, don't acquire serialization lock. */ + Status = EcLock(sc, FALSE); if (ACPI_FAILURE(Status)) { - printf("Queuing GPE query handler failed.\n"); - Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_ISR); - if (ACPI_FAILURE(Status)) - printf("EcGpeHandler: AcpiEnableEvent failed\n"); + ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), + "GpeQuery lock error: %s\n", AcpiFormatException(Status)); + return (-1); } + /* + * If burst was active, but the status bit was cleared, the EC had to + * exit burst mode for some reason. Record this for later. + */ + EcStatus = EC_GET_CSR(sc); + if (sc->ec_burstactive && (EcStatus & EC_FLAG_BURST_MODE) == 0) { + CTR0(KTR_ACPI, "ec burst disabled in query handler"); + sc->ec_burstactive = FALSE; + } + + /* + * If the EC_SCI bit of the status register is not set, then pass + * it along to any potential waiters as it may be an IBE/OBF event. + * If it is set, queue a query handler. + */ + if ((EcStatus & EC_EVENT_SCI) == 0) { + CTR1(KTR_ACPI, "ec event was IBE/OBF, status %#x", EcStatus); + sc->ec_csrvalue = EcStatus; + wakeup(&sc->ec_csrvalue); + } else if (!sc->ec_sci_pend) { + /* SCI bit set and no pending query handler, so schedule one. */ + CTR0(KTR_ACPI, "ec queueing gpe handler"); + Status = AcpiOsQueueForExecution(OSD_PRIORITY_GPE, EcGpeQueryHandler, + Context); + if (ACPI_SUCCESS(Status)) { + sc->ec_sci_pend = TRUE; + } else { + printf("Queuing GPE query handler failed.\n"); + Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_ISR); + if (ACPI_FAILURE(Status)) + printf("EcGpeHandler: AcpiEnableEvent failed\n"); + } + } + + EcUnlock(sc); return (0); } @@ -824,7 +884,8 @@ EcAddr = Address; Status = AE_ERROR; - Status = EcLock(sc); + /* Grab serialization lock to hold across command sequence. */ + Status = EcLock(sc, TRUE); if (ACPI_FAILURE(Status)) return_ACPI_STATUS (Status); @@ -859,87 +920,103 @@ { EC_STATUS EcStatus; ACPI_STATUS Status; - int count, i, period, retval, slp_ival; + int count, i, retval, slp_ival; ACPI_SERIAL_ASSERT(ec); Status = AE_NO_HARDWARE_RESPONSE; - - /* - * Wait for 1 us before checking the CSR. Testing shows about - * 50% of requests complete in 1 us and 90% of them complete - * in 5 us or less. - */ - AcpiOsStall(1); + EcStatus = 0; /* - * Poll the EC status register for up to 1 ms in chunks of 10 us - * to detect completion of the last command. + * Poll for up to ec_poll_time microseconds since many ECs complete + * the command quickly, especially if in burst mode. */ - for (i = 0; i < 1000 / EC_POLL_DELAY; i++) { +#if 0 /* Enable this as a possible workaround if EC times out. */ + AcpiOsStall(EC_POLL_DELAY); +#endif + count = ec_poll_time / EC_POLL_DELAY; + if (count <= 0) + count = 1; + for (i = 0; i < count; i++) { EcStatus = EC_GET_CSR(sc); + if (sc->ec_burstactive && (EcStatus & EC_FLAG_BURST_MODE) == 0) { + CTR0(KTR_ACPI, "ec burst disabled in waitevent (poll)"); + sc->ec_burstactive = FALSE; + } if (EVENT_READY(Event, EcStatus)) { + CTR1(KTR_ACPI, "ec poll wait ready, status %#x", EcStatus); Status = AE_OK; break; } AcpiOsStall(EC_POLL_DELAY); } - period = i * EC_POLL_DELAY; /* * If we still don't have a response and we're up and running, wait up - * to ec_poll_timeout ms for completion, sleeping for chunks of 10 ms. + * to ec_timeout ms for completion, sleeping for chunks of 1 ms or the + * smallest resolution hz supports. */ slp_ival = 0; if (Status != AE_OK) { retval = ENXIO; - count = ec_poll_timeout / 10; - if (count == 0) - count = 1; - slp_ival = hz / 100; - if (slp_ival == 0) - slp_ival = 1; + if (!cold) { + slp_ival = hz / 1000; + if (slp_ival != 0) { + count = ec_timeout / slp_ival; + } else { + /* hz has less than 1000 Hz resolution so scale timeout. */ + slp_ival = 1; + count = ec_timeout / (1000 / hz); + } + } else + count = ec_timeout; for (i = 0; i < count; i++) { if (retval != 0) EcStatus = EC_GET_CSR(sc); else EcStatus = sc->ec_csrvalue; + if (sc->ec_burstactive && (EcStatus & EC_FLAG_BURST_MODE) == 0) { + CTR0(KTR_ACPI, "ec burst disabled in waitevent (slp)"); + sc->ec_burstactive = FALSE; + } if (EVENT_READY(Event, EcStatus)) { + CTR1(KTR_ACPI, "ec sleep wait ready, status %#x", EcStatus); Status = AE_OK; break; } - if (!cold) - retval = tsleep(&sc->ec_csrvalue, PZERO, "ecpoll", slp_ival); - else - AcpiOsStall(10000); + if (!cold) { + retval = msleep(&sc->ec_csrvalue, &sc->ec_mtx, PZERO, "ecpoll", + slp_ival); + } else + AcpiOsStall(1000); } } - /* Calculate new delay and log it. */ - if (slp_ival > 0) - period += i * 10000; - CTR2(KTR_ACPI, "ec got event %#x after %d us", EcStatus, period); - return (Status); } static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd) { - ACPI_STATUS Status; - EC_EVENT Event; + ACPI_STATUS status; + EC_EVENT event; + EC_STATUS ec_status; ACPI_SERIAL_ASSERT(ec); + /* Don't use burst mode if user disabled it. */ + if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE) + return (AE_ERROR); + /* Decide what to wait for based on command type. */ switch (cmd) { case EC_COMMAND_READ: case EC_COMMAND_WRITE: case EC_COMMAND_BURST_DISABLE: - Event = EC_EVENT_INPUT_BUFFER_EMPTY; + event = EC_EVENT_INPUT_BUFFER_EMPTY; break; case EC_COMMAND_QUERY: case EC_COMMAND_BURST_ENABLE: - Event = EC_EVENT_OUTPUT_BUFFER_FULL; + event = EC_EVENT_OUTPUT_BUFFER_FULL; break; default: ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), @@ -948,50 +1025,64 @@ } /* Run the command and wait for the chosen event. */ + CTR1(KTR_ACPI, "ec running command %#x", cmd); EC_SET_CSR(sc, cmd); - Status = EcWaitEvent(sc, Event); - if (ACPI_FAILURE(Status)) { + status = EcWaitEvent(sc, event); + if (ACPI_SUCCESS(status)) { + /* If we succeeded, burst flag should now be present. */ + if (cmd == EC_COMMAND_BURST_ENABLE) { + ec_status = EC_GET_CSR(sc); + if ((ec_status & EC_FLAG_BURST_MODE) == 0) + status = AE_ERROR; + } + } else { ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), "EcCommand: no response to %#x\n", cmd); } - return (Status); + return (status); } static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) { - ACPI_STATUS Status; + ACPI_STATUS status; + UINT8 data; ACPI_SERIAL_ASSERT(ec); CTR1(KTR_ACPI, "ec read from %#x", Address); -#ifdef notyet /* If we can't start burst mode, continue anyway. */ - EcCommand(sc, EC_COMMAND_BURST_ENABLE); -#endif + status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); + if (status == AE_OK) { + data = EC_GET_DATA(sc); + if (data == EC_BURST_ACK) { + CTR0(KTR_ACPI, "ec burst enabled"); + sc->ec_burstactive = TRUE; + } + } - Status = EcCommand(sc, EC_COMMAND_READ); - if (ACPI_FAILURE(Status)) - return (Status); + status = EcCommand(sc, EC_COMMAND_READ); + if (ACPI_FAILURE(status)) + return (status); EC_SET_DATA(sc, Address); - Status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL); - if (ACPI_FAILURE(Status)) { + status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL); + if (ACPI_FAILURE(status)) { ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), "EcRead: Failed waiting for EC to send data.\n"); - return (Status); + return (status); } *Data = EC_GET_DATA(sc); -#ifdef notyet if (sc->ec_burstactive) { - Status = EcCommand(sc, EC_COMMAND_BURST_DISABLE); - if (ACPI_FAILURE(Status)) - return (Status); + status = EcCommand(sc, EC_COMMAND_BURST_DISABLE); + if (ACPI_FAILURE(status)) + return (status); + sc->ec_burstactive = FALSE; + CTR0(KTR_ACPI, "ec disabled burst ok"); } -#endif return (AE_OK); } @@ -999,43 +1090,49 @@ static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) { - ACPI_STATUS Status; + ACPI_STATUS status; + UINT8 data; ACPI_SERIAL_ASSERT(ec); CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, *Data); -#ifdef notyet /* If we can't start burst mode, continue anyway. */ - EcCommand(sc, EC_COMMAND_BURST_ENABLE); -#endif + status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); + if (status == AE_OK) { + data = EC_GET_DATA(sc); + if (data == EC_BURST_ACK) { + CTR0(KTR_ACPI, "ec burst enabled"); + sc->ec_burstactive = TRUE; + } + } - Status = EcCommand(sc, EC_COMMAND_WRITE); - if (ACPI_FAILURE(Status)) - return (Status); + status = EcCommand(sc, EC_COMMAND_WRITE); + if (ACPI_FAILURE(status)) + return (status); EC_SET_DATA(sc, Address); - Status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY); - if (ACPI_FAILURE(Status)) { + status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY); + if (ACPI_FAILURE(status)) { ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), "EcRead: Failed waiting for EC to process address\n"); - return (Status); + return (status); } EC_SET_DATA(sc, *Data); - Status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY); - if (ACPI_FAILURE(Status)) { + status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY); + if (ACPI_FAILURE(status)) { ACPI_VPRINT(sc->ec_dev, acpi_device_get_parent_softc(sc->ec_dev), "EcWrite: Failed waiting for EC to process data\n"); - return (Status); + return (status); } -#ifdef notyet if (sc->ec_burstactive) { - Status = EcCommand(sc, EC_COMMAND_BURST_DISABLE); - if (ACPI_FAILURE(Status)) - return (Status); + status = EcCommand(sc, EC_COMMAND_BURST_DISABLE); + if (ACPI_FAILURE(status)) + return (status); + sc->ec_burstactive = FALSE; + CTR0(KTR_ACPI, "ec disabled burst ok"); } -#endif return (AE_OK); } --------------010006070701000204050700--