Date: Mon, 07 Oct 2013 12:11:41 -0500 From: Jim Bryant <kc5vdj.freebsd@gmail.com> To: tzoi516 <tzoi516@gmail.com> Cc: freebsd-drivers@freebsd.org Subject: Re: Latitude E6400 Drivers Message-ID: <5252EB4D.1030604@gmail.com> In-Reply-To: <5251A405.1010304@gmail.com> References: <5251A405.1010304@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm running on an E5500, and it isn't too different.
here's an example of my dmesg.
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-PRERELEASE #0 r255757: Sat Sep 21 06:32:15 CDT 2013
jbryant@argus.electron-tube.net:/usr/obj/usr/src/sys/LATITUDE-E5500-GM45
amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.04-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17
Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4054933504 (3867 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL M09 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xf6c20-0xf6c3e on motherboard
smbios0: Version: 2.4, BCD Revision: 2.4
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL M09 > on motherboard
ACPI Warning: Incorrect checksum in table [TCPA] - 0xC4, should be 0x68
(20110527/tbutils-282)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of e0000, 20000 (3) failed
acpi0: reservation of 100000, dd28d400 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xefe8-0xefef mem
0xf6c00000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci1: <VGA-compatible display> mem 0xf6b00000-0xf6bfffff at device
2.1 on pci0
acpi_video1: <ACPI video extension> on vgapci1
ACPI Warning: For \134_SB_.PCI0.VID2._DOD: Return Package has no
elements (empty) (20110527/nspredef-500)
evaluation of \134_SB_.PCI0.VID2._DOD makes no sense
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6f60-0x6f7f irq 20 at
device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at
device 26.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6fa0-0x6fbf irq 22 at
device 26.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801I HDA Controller> mem 0xf6afc000-0xf6afffff irq 21 at
device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib2
iwn0: <Intel WiFi Link 5100> mem 0xf69fe000-0xf69fffff irq 17 at device
0.0 on pci12
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci9: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x00a200> mem 0xf68f0000-0xf68fffff irq 16 at device 0.0 on pci9
bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: nn:nn:nn:nn:nn:nn
uhci3: <Intel 82801I (ICH9) USB controller> port 0x6f00-0x6f1f irq 20 at
device 29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x6f20-0x6f3f irq 21 at
device 29.1 on pci0
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at
device 29.2 on pci0
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> irq 19 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xf67ff800-0xf67fffff
irq 17 at device 1.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 38:4f:c0:00:1f:32:1d:e1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1,
CYCLEMASTER mode
sdhci0: <RICOH R5C822 SD> mem 0xf67ff600-0xf67ff6ff irq 18 at device 1.2
on pci2
sdhci0: 1 slot(s) allocated
pci2: <base peripheral> at device 1.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port
0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf
mem 0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1100-0x111f mem
0xf6afbf00-0xf6afbfff irq 19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
tpm0: <Trusted Platform Module> port 0xcb0-0xcbb iomem
0xfed40000-0xfed44fff on acpi0
tpm: Broadcom BCM0102 rev 0x20
ichwd0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
SGI XFS with large block numbers, tracing, no debug enabled
Timecounters tick every 1.000 msec
bge0f0: Ethernet address: nn:nn:nn:nn:nn:nn
bge0f1: Ethernet address: nn:nn:nn:nn:nn:nn
bge0f2: Ethernet address: nn:nn:nn:nn:nn:nn
bge0f3: Ethernet address: nn:nn:nn:nn:nn:nn
IPsec: Initialized Security Association Processing.
ncp_load: loaded
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to
accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
hdacc0: <IDT 92HD71B7 HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD71B7 Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD71B7 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,14 on hdaa0
pcm1: <IDT 92HD71B7 (Ext-Left Analog Line-out)> at nid 15 on hdaa0
pcm2: <IDT 92HD71B7 (Left Digital)> at nid 30 on hdaa0
hdacc1: <Intel Cantiga HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc1
pcm3: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA>
IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC>
IAF/3/40/0x67<INT,USR,SYS,REA,WRI>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST CDRW/DVD GCCT20N A106> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7
ugen2.2: <vendor 0x08ff> at usbus2
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
ugen7.2: <KMicron> at usbus7
umass0: <MSC Bulk-Only Transfer> on usbus7
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00
10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <WDC WD30 EZRX-00DC0B0 > Fixed Direct Access SCSI-5 device
da0: 40.000MB/s transfers
da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da0: quirks=0xa<NO_6_BYTE,4K>
Root mount waiting for: usbus7
ugen7.3: <JMicron> at usbus7
umass1: <MSC Bulk-Only Transport> on usbus7
(probe0:umass-sim1:1:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00
10 00 00
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe0:umass-sim1:1:0:0): Error 22, Unretryable error
da1 at umass-sim1 bus 1 scbus7 target 0 lun 0
da1: <WDC WD30 EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6 device
da1: 40.000MB/s transfers
da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da1: quirks=0xa<NO_6_BYTE,4K>
da2 at umass-sim1 bus 1 scbus7 target 0 lun 1
da2: <WDC WD30 EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6 device
da2: 40.000MB/s transfers
da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da2: quirks=0xa<NO_6_BYTE,4K>
Root mount waiting for: usbus7
ugen7.4: <vendor 0x05e3> at usbus7
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> on
usbus7
ugen5.2: <Logitech> at usbus5
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/57.01, addr 2> on usbus5
ums0: 16 buttons and [XYZT] coordinates ID=0
Root mount waiting for: usbus7
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/57.01, addr 2> on usbus5
uhub8: 4 ports with 3 removable, self powered
Root mount waiting for: usbus7
ugen7.5: <Sunplus Technology Inc.> at usbus7
umass2: <Bulk Only Interface> on usbus7
da3 at umass-sim2 bus 2 scbus8 target 0 lun 0
da3: <WDC WD20 EADS-11R6B1 > Fixed Direct Access SCSI-2 device
da3: 40.000MB/s transfers
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3: quirks=0x2<NO_6_BYTE>
ugen7.6: <vendor 0x05e3> at usbus7
uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 6> on
usbus7
uhub9: 4 ports with 4 removable, self powered
ugen7.7: <vendor 0x1130> at usbus7
ukbd0: <vendor 0x1130 PCsensor Temper, class 0/0, rev 1.10/1.50, addr 7>
on usbus7
kbd2 at ukbd0
uhid1: <vendor 0x1130 PCsensor Temper, class 0/0, rev 1.10/1.50, addr 7>
on usbus7
Trying to mount root from ufs:/dev/ada0s4a [rw]...
interface oldnfs.1 already present in the KLD 'kernel'!
linker_load_file: Unsupported file type
nfsd: can't register svc name
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
g_dev_taste: make_dev_p() failed (gp->name=md0s4, error=17)
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
ugen7.8: <Samsung Electronics> at usbus7
umass3: <Mass Storage> on usbus7
da4 at umass-sim3 bus 3 scbus9 target 0 lun 0
da4: <Android UMS Composite 0001> Removable Direct Access SCSI-2 device
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da4: quirks=0x2<NO_6_BYTE>
da5 at umass-sim3 bus 3 scbus9 target 0 lun 1
da5: <Android UMS Composite 0001> Removable Direct Access SCSI-2 device
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da5: quirks=0x2<NO_6_BYTE>
tzoi516 wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi,
>
> I'm able to find solutions to most drivers, but I'm having trouble
> determining what to load for these:
>
> none0@pci0:0:3:0: class=0x078000 card=0x02331028 chip=0x2a448086
> rev=0x07 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Mobile 4 Series Chipset MEI Controller'
> class = simple comms
> bar [10] = type Memory, range 64, base 0xf6fd9ef0, size 16, enabled
> cap 01[50] = powerspec 3 supports D0 D3 current D0
> cap 05[8c] = MSI supports 1 message, 64 bit
>
> none1@pci0:0:3:3: class=0x070002 card=0x02331028 chip=0x2a478086
> rev=0x07 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Mobile 4 Series Chipset AMT SOL Redirection'
> class = simple comms
> subclass = UART
> bar [10] = type I/O Port, range 32, base 0xef88, size 8, enabled
> bar [14] = type Memory, range 32, base 0xf6fda000, size 4096,
> enabled
> cap 01[c8] = powerspec 3 supports D0 D3 current D0
> cap 05[d0] = MSI supports 1 message, 64 bit
>
> none2@pci0:0:31:3: class=0x0c0500 card=0x02331028 chip=0x29308086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801I (ICH9 Family) SMBus Controller'
> class = serial bus
> subclass = SMBus
> bar [10] = type Memory, range 64, base 0xf6fd9f00, size 256, enabled
> bar [20] = type I/O Port, range 32, base 0x1100, size 32, enabled
>
>
> none3@pci0:3:1:1: class=0x080501 card=0x02331028 chip=0x08221180
> rev=0x21 hdr=0x00
> vendor = 'Ricoh Co Ltd'
> device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'
> class = base peripheral
> subclass = SD host controller
> bar [10] = type Memory, range 32, base 0xf1bff600, size 256, enabled
> cap 01[80] = powerspec 2 supports D0 D1 D2 D3 current D0
>
> none4@pci0:3:1:2: class=0x088000 card=0x02331028 chip=0x08431180
> rev=0x11 hdr=0x00
> vendor = 'Ricoh Co Ltd'
> device = 'R5C843 MMC Host Controller'
> class = base peripheral
> bar [10] = type Memory, range 32, base 0xf1bff700, size 256, enabled
> cap 01[80] = powerspec 2 supports D0 D1 D2 D3 current D0
>
> I know people are busy, but any links or references to help find
> drivers or modules would be appreciated. I've used man and PCI driver
> sites to help narrow down, but nothing helped. mmc and mmcsd modules
> don't work with the Ricoh devices, per pciconf. Thanks.
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.19 (FreeBSD)
> Comment: Using GnuPG with undefined - http://www.enigmail.net/
>
> iQEcBAEBAgAGBQJSUaQEAAoJEDHcsSNRIRfJxzgIALFcAUekhIf4+/XGjqk+XLZT
> Y/6QW5EFvGTopG1Vil5HtmosgQvgP12a1aG7BrCmgyRGomsbl/Sr01+BBRI5rDiA
> 5Rbjv7mmK8NAuzHFhwZB9eBnAIHFndqA4UqO7kLw9x9OihZBjmG7GZlCl+p3cACS
> ljlofiGUlS2qlh1UAPkPL/kgXucuqkoWvkhNHv7VfGbf5dEAKLVt6mw4Ya71iXX6
> qIjkLvENq7GBkwVI/YpL+2dh8hMiWxQ0DT+3es0Fne5PWK1CA5NcykmSmC7e/5H1
> lP+U836SYmujkNSCvvq1z9gfJB1dxY4IwrHXLEjQxYwPG1IB2LtRQtV7hNLm24Q=
> =bze0
> -----END PGP SIGNATURE-----
> _______________________________________________
> freebsd-drivers@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-drivers
> To unsubscribe, send any mail to "freebsd-drivers-unsubscribe@freebsd.org"
> .
>
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5252EB4D.1030604>