Date: Sun, 6 Mar 2005 13:17:32 -0800 (PST) From: Seva Fwd <seva_fwd@yahoo.com> To: freebsd-stable@freebsd.org Subject: AMD64 Issue with russian symbols on FAT32 Message-ID: <20050306211732.1240.qmail@web51102.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi, all I have installed FreeBSD/amd64 from February 2005 snapshot (5.3-STABLE-SNAP001-amd64-miniinst.iso) and have issues with Russian symbols support on FAT32 partitions. I am using options -Lru_RU.KOI8-R,-Wkoi2dos in /etc/fstab to turn support of Russian file names on. If I mount partition without these options everithing works well except Russian names are unavailable. However, if I mount partition with these options it does not help with Russian names, and even more english names becomes abracadabra. I think it is issue of amd64 (i.e. 64/32 incompatibility). I suspect iconv. I am sure partitions itself are correct due to same partitions (I mean same hdd and usd disks) are operating well on i386 arch. And even a (Frenzy) Live CD that is i386 arch works well on the same computer. Here is outpu of dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE-SNAP001 #0: Sun Jan 30 03:45:41 UTC 2005 root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3500+ (2202.83-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 1073414144 (1023 MB) avail memory = 1024745472 (977 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x8400-0x847f mem 0xfb300000-0xfb3007ff irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:00:bf:7c:39 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:bf:7c:39 fwe0: Ethernet address: 02:e0:18:bf:7c:39 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem 0xfb400000-0xfb41ffff,0xfb500000-0xfb500fff irq 18 at device 8.0 on pci0 atapci0: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 ata4: channel #2 on atapci0 skc0: <Marvell Gigabit Ethernet> port 0x9800-0x98ff mem 0xfb700000-0xfb703fff irq 17 at device 10.0 on pci0 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:11:d8:1b:f1:7a miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xfb900000-0xfb9000ff irq 18 at device 13.0 on pci0 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:00:1c:d7:54:e8 pci0: <network> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xa400-0xa4ff,0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xc000-0xc007 irq 20 at device 15.0 on pci0 ata5: channel #0 on atapci1 ata6: channel #1 on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci2 ata1: channel #1 on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 16.4 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: <ISA Option ROMs> at iomem 0xcd000-0xd0fff,0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2202828102 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <NEC DVD RW ND-2510A/2.16> at ata1-master UDMA33 ad10: 152627MB <WDC WD1600JD-22HBB0/08.02D08> [310101/16/63] at ata5-master SATA150 Mounting root from ufs:/dev/ad10s2a ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web http://birthday.yahoo.com/netrospective/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050306211732.1240.qmail>